Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Minimum quantity lubrication"”.

  1. Characterizing Mist Flow in Minimum Quantity Lubrication Drills

    Minimum Quantity Lubrication (MQL) uses a mixture of oil and air in small quantities to effectively lubricate and cool the cutting zone. Because of this small quantities of lubricants being used in the order of 5-100 ml/hr., the control of the flow is a critical parameter. Presently, this control …

    tamu Repository record for Characterizing Mist Flow in Minimum Quantity Lubrication Drills (opens in a new tab)

  2. Effects of Minimum Quantity Lubrication in Drilling 1018 Steel.

    … have made it possible to perform machining with minimum-quantity lubrication (MQL). Drilling takes a key position in the realization of MQL machining. In this study the effects of using MQL in drilling AISI 1018 steel with HSS tools using a vegetable based lubricant were investigated. A full …

    unt Repository record for Effects of Minimum Quantity Lubrication in Drilling 1018 Steel. (opens in a new tab)

  3. Characterization of Lubricant Droplets for Internal Minimum Quantity Lubrication

    … available lubricants’ droplets for internal minimum quantity lubrication (MQL). The effect of varying air pressure on the resultant droplets and drilling performance was studied. Resultant droplet sizes and contact angles on A380 aluminum were evaluated. Droplet formation at the drill tip was …

    tamu Repository record for Characterization of Lubricant Droplets for Internal Minimum Quantity Lubrication (opens in a new tab)

  4. Laser assisted micro milling with minimum quantity lubrication and vortex cooling

    … investigations consider the use of wet assist, minimum quantity lubrication (MQL), vortex cooling, and laser assisted micro milling (LAMM) to overcome some of the limitations. In particular, prior investigations of LAMM have shown that by using a laser in situ to thermally soften the workpiece …

    gatech Repository record for Laser assisted micro milling with minimum quantity lubrication and vortex cooling (opens in a new tab)

  5. Performance Evaluation of Minimum Quantity Lubrication (MQL) When Machining High-Performance Materials

    … magnesium alloys through different cooling and lubrication strategies and their impact on the environment. This study conducted controlled machining tests with dry and vegetable oil mist cutting settings to measure surface roughness, tool contact length, chip morphology, and flank wear. The …

    rit Repository record for Performance Evaluation of Minimum Quantity Lubrication (MQL) When Machining High-Performance Materials (opens in a new tab)

  6. Through-Tool Minimum Quantity Lubrication and Effect on Machinability of Inconel 718

    This thesis simulated through-tool minimum quantity lubrication (MQL) to experimentally characterize micromist lubricant droplets. The effect of nozzle surface roughness and air pressure was analyzed to study the lubricant droplets’ size, distribution and exit air velocity. MQL at different …

    tamu Repository record for Through-Tool Minimum Quantity Lubrication and Effect on Machinability of Inconel 718 (opens in a new tab)

  7. Effect of Channel Roughness on Micro Droplet Distribution on Internal Minimum Quantity Lubrication

    … commercially available lubricants in internal minimum quantity lubrication (MQL). The effect of increased channel roughness in the nozzle of a MQL system was tested. Chemical etching was studied to control the roughness of external surfaces of tungsten carbide tools. Mixtures of oils and air …

    tamu Repository record for Effect of Channel Roughness on Micro Droplet Distribution on Internal Minimum Quantity Lubrication (opens in a new tab)

  8. Effects of Minimum Quantity Lubrication (Mql) on Tool Life in Drilling Aisi 1018 Steel

    It has been reported that minimum quantity lubrication (MQL) provides better tool life compared to flood cooling under some drilling conditions. In this study, I evaluate the performance of uncoated HSS twist drill when machining AISI 1018 steel using a newly developed lubricant designed for MQL …

    unt Repository record for Effects of Minimum Quantity Lubrication (Mql) on Tool Life in Drilling Aisi 1018 Steel (opens in a new tab)

  9. Design and Fundamental Understanding of Minimum Quantity Lubrication (MQL) Assisted Grinding Using Advanced Nanolubricants

    … consumption, heat, and intense contact seizures. Lubrication and cooling from grinding fluids is crucial in minimizing the deleterious effects of friction and heat to maximize the output part quality and process efficiency. The conventional flood grinding approach of an uneconomical application of …

    arkansas Repository record for Design and Fundamental Understanding of Minimum Quantity Lubrication (MQL) Assisted Grinding Using Advanced Nanolubricants (opens in a new tab)

  10. Tool wear analysis in various machining processes and study of minimum quantity lubrication (MQL)

    … titanium. Finally, for a better understanding of Minimum Quantity Lubrication (MQL) and its effective use in practical industrial applications, MQL parameters such as droplet sizes, the droplet distributions and wetting angles of various types of lubricants were investigated. The measurement …

    msu Repository record for Tool wear analysis in various machining processes and study of minimum quantity lubrication (MQL) (opens in a new tab)

  11. Investigation of Minimum Quantity Lubrication Coolant Strategy for the machining of Austempered Ductile Iron (ADI)

    … environmental friendly coolant strategy known as minimum quantity lubrication (MQL) uses small amounts of oil such as rapeseed or castor. A computational fluid dynamics (CFD) model was developed in this research using ANSYS Fluent to model the temperature profile and the oil droplet behavior in …

    guelph Repository record for Investigation of Minimum Quantity Lubrication Coolant Strategy for the machining of Austempered Ductile Iron (ADI) (opens in a new tab)

  12. Fundamental tool wear study in turning of Ti-6Al-4V alloy (Ti64) and nano-enhanced Minimum Quantity Lubrication (MQL) milling

    … considers improving tool life by adopting new lubrication techniques. In particular, Minimum Quantity Lubrication (MQL)-based machining process was chosen as it has many merits over not only conventional flood cooling machining but also dry machining. However, few disadvantages make the …

    msu Repository record for Fundamental tool wear study in turning of Ti-6Al-4V alloy (Ti64) and nano-enhanced Minimum Quantity Lubrication (MQL) milling (opens in a new tab)

  13. Investigation of Machining (Drilling) of Bio-Composite Reinforced with Jute Fibers under Different Machining Conditions

    … and High-Speed Steel Cobalt HSS-Co) and Lubrication condition (Dry, Minimum Quantity Lubrication-MQL and Cryogenic-LN2). A total of 27 experimental trials were performed, and the responses were measured for each condition. Statistical analysis was performed with the Minitab software, with …

    rit Repository record for Investigation of Machining (Drilling) of Bio-Composite Reinforced with Jute Fibers under Different Machining Conditions (opens in a new tab)

  14. Mist Characterization in Drilling 1018 Steel

    Minimum quantity lubrication replaces the traditional method of flood cooling with small amounts of high-efficient lubrication. Limited studies have been performed to determine the characteristics of mist produced during MQL. This study investigated the mist concentration levels produced while …

    unt Repository record for Mist Characterization in Drilling 1018 Steel (opens in a new tab)

  15. Numerical and Experimental Assessment of Nano MQL Machining of Ti-6Al-4V

    Nano Minimum Quantity Lubrication (NFMQL) is an environmentally sustainable strategy that provides benefits similar to conventional cooling strategies. The literature provides sufficient experimental studies to attest the benefits of NFMQL machining; however, numerical modeling of NFMQL machining …

    guelph Repository record for Numerical and Experimental Assessment of Nano MQL Machining of Ti-6Al-4V (opens in a new tab)

  16. Surface Finish Modeling in Micromilling of Biocompatible Materials

    … micromilling on a high speed machine system in minimum quantity lubrication was used to remove most materials and define a channel pattern. Microchannels were machined with ball end mills of diameters from Ø152μm to Ø198μm on NiTi alloy, 304 and 316L stainless steels. Assessment of microchannel …

    tamu Repository record for Surface Finish Modeling in Micromilling of Biocompatible Materials (opens in a new tab)

Page 1 of 3