Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 211 for “"Misorientation"”.

  1. Influence of grain misorientation on grain growth in nanocrystalline metals

    … films by focusing on the role grain boundary misorientation plays in regulating grain growth. The was be accomplished by completing two types of studies: (i) Annealing sputter-deposited thin films to study mobility in a case where the driving force is assumed to be dominated by grain boundary …

    alabama Repository record for Influence of grain misorientation on grain growth in nanocrystalline metals (opens in a new tab)

  2. The variation of subgrain misorientation in aluminum with large steady-state creep strain

    … = 0.20) all subgrain boundaries had small misorientations, typically, 0.6. The misorientation across boundaries formed as a result of dislocation accumulation continued to increase well past steady-state up to a strain of about 1.2, where a maximum average value of 1.2 was observed. This …

    nps Repository record for The variation of subgrain misorientation in aluminum with large steady-state creep strain (opens in a new tab)

  3. Micromechanical Studies of Intergranular Strain and Lattice Misorientation Fields and Comparisons to Advanced Diffraction Measurements

    … are systematically evaluated. The lattice misorientation field can be used to determine the intragranular deformation behavior in polycrystals or to describe the deformation inhomogeneity due to dislocation plasticity in single crystals. The study of indentation-induced lattice …

    utk-theses Repository record for Micromechanical Studies of Intergranular Strain and Lattice Misorientation Fields and Comparisons to Advanced Diffraction Measurements (opens in a new tab)

  4. Effect of low angle boundary misorientation on creep deformation in the superalloy CM 247 LC, The

    The effect of low angle boundary misorientation on the creep properties of superalloy CM 247LC bicrystals has been investigated in the medium temperature - medium stress creep regime. Constant load tensile creep tests were performed on mixed Low Angle Boundary (LAB) samples with misorientations …

    colo-mines Repository record for Effect of low angle boundary misorientation on creep deformation in the superalloy CM 247 LC, The (opens in a new tab)

  5. Experimental study of the effects of annealing time, equilibrium angle, and absolute misorientation angle on thermal grain-boundary grooving in cube-textured nickel

    … annealing time, equilibrium angle, and absolute misorientation angle on thermal grain-boundary grooving in cube-textured nickel were investigated.Small samples of RABiTS Ni were recrystallized at 800°C for times of 10, 30, 60,and 120 minutes to produce diffusion-induced thermal grooves on their …

    ut-knoxville Repository record for Experimental study of the effects of annealing time, equilibrium angle, and absolute misorientation angle on thermal grain-boundary grooving in cube-textured nickel (opens in a new tab)

  6. An electron backscatter diffraction analysis of the microstructure of pure aluminum processed by equal-channel angular pressing

    … performed. Grain and subgrain size and boundary misorientation distributions during such large-strain deformation processing were of particular interest. A texture was present after one pressing and the boundary misorientation distribution had a peak at 5 deg - 10 deg although boundaries were …

    nps Repository record for An electron backscatter diffraction analysis of the microstructure of pure aluminum processed by equal-channel angular pressing (opens in a new tab)

  7. Characterization of Inelastic Strain in Type 316H Austenitic Stainless Steel using Electron Backscatter Diffraction

    … The EBSD metrics termed kernel average misorientation (KAM), grain orientation spread (GOS), low-angle boundary fraction (LABF) and deformed grain fraction (DGF) all showed a linear variation with inelastic strain accumulation in both tensile and cyclic tests. In contrast the proportion …

    the-open-u Download PDF for Characterization of Inelastic Strain in Type 316H Austenitic Stainless Steel using Electron Backscatter Diffraction (opens in a new tab)

  8. Characterisation of Plastic and Creep Strains From Lattice Orientation Measurements

    … on strain-induced lattice orientation changes (misorientation). The study was conducted on both service-aged and un-aged Type 316H stainless steels through a series of monotonic tests in tension, compression and in constant load creep. <br></br><br></br>The study demonstrates that the …

    the-open-u Download PDF for Characterisation of Plastic and Creep Strains From Lattice Orientation Measurements (opens in a new tab)

  9. An experimental-computational study on the plastic deformation behavior of body-centered cubic titanium alloys

    … between plastic strain and crystallographic misorientation. Several material characterization techniques including tensile testing, Scanning Electron Microscopy (SEM), Digital Image Correlation (DIC), and Electron Backscatter Diffraction (EBSD) were combined to study the correlation between …

    msu

  10. Interactions between grain boundary faceting, migration, and grain rotation: color group and molecular dynamics simulation approaches

    … symmetry-dictated extrema with respect to misorientation of the grains and with respect to grain boundary normal orientations. MD simulations were used to study the evolution of the system and to elucidate the interactions between grain rotation and faceting in nano-scale systems. The …

    washington Repository record for Interactions between grain boundary faceting, migration, and grain rotation: color group and molecular dynamics simulation approaches (opens in a new tab)

  11. Thermally induced sensitisation of austenitic stainless steel for AGR fuel cladding

    … There exists a threshold grain boundary misorientation angle below which grain boundaries are immune to intergranular attack while grain boundaries with a misorientation higher than this angle are subject to attack and the extent of attack varies from grain boundary to grain boundary. At …

    birmingham Download PDF for Thermally induced sensitisation of austenitic stainless steel for AGR fuel cladding (opens in a new tab)

  12. Structural Integrity of Multimetallic Layered Composites Under Extreme Conditions

    … variants namely 625, 690, 718 and X-750) with no misorientation, assessing their stability at 1000 K after exposure to 10 keV collision cascades up to 0.12 dpa. Notable findings include defect clustering on the {1 2 0} family of planes of Inconel and Cu, with Stacking Faults and Lomer-Cottrell …

    alabama Repository record for Structural Integrity of Multimetallic Layered Composites Under Extreme Conditions (opens in a new tab)

  13. Computer generation of Kikuchi projections and characterization of general bicrystals

    Three parameters, i.e., misorientation angle, misorientation axis, and boundary normal, have been used to describe a general bicrystal, such as two adjacent grains, subgrains, twins, or two neighboring phases. A computer program has been developed to determine these three parameters. The angle and …

    vt Repository record for Computer generation of Kikuchi projections and characterization of general bicrystals (opens in a new tab)

  14. Development of electron backscatter diffraction as a tool to image and analyse threading dislocations in GaN

    … types has its own unique associated strain and misorientation profile that canaffect the semiconductor’s structure, and also its (opto)electronic properties.The first step in analysing these defects within GaN is to obtain high-quality images of their distributions near to the surface of the …

    strathclyde Repository record for Development of electron backscatter diffraction as a tool to image and analyse threading dislocations in GaN (opens in a new tab)

  15. The morphological characterisation of grains and grain boundaries.

    … the relationship between grain size and the misorientation of grains. The experimental techniques used are manual grain size measurement methods, automatic image analysis and Electron Backscatter Diffraction (EBSD). The materials used are a ferritic, single phased, equi-axed steel (mild …

    sheffield-hallam Download PDF for The morphological characterisation of grains and grain boundaries. (opens in a new tab)

  16. Evolução das tensões residuais e sua relação com a “misorientação” microestrutural de um aço astm dh36 após soldagem

    … RAYSTRESS. A study of the grain boundaries misorientation has been carried out with the purpose of explaining this phenomenon by the microstructure alteration. For the analysis of the microstructure, thermomechanical simulation with Gleeble®3800 equipment and scanning electronic microscopy …

    brazil-uerj Repository record for Evolução das tensões residuais e sua relação com a “misorientação” microestrutural de um aço astm dh36 após soldagem (opens in a new tab)

  17. Crystal Plasticity Based Finite Element Modeling in Polycrystalline Ti-7Al Alloys

    … of orientation imaging microscopy (OIM), misorientation, microtesting, computational simulations and minimization process, including genetic algorithms for calibration of the material parameters and characterization. Size effects are also taken into consideration in the analysis. The …

    jhu Repository record for Crystal Plasticity Based Finite Element Modeling in Polycrystalline Ti-7Al Alloys (opens in a new tab)

  18. “Who All Gon Be There”: The Relationship Between Racial Identity, Perceived Social Distance, And Anxiety Among People Of African Descent

    … Inventory of Black Identity (MIBI), the Cultural Misorientation Scale (CMS), the State Trait Y-1 and Y-2 Questionnaires, and the Revised Bogardus Social Distance Scale. Pearson correlations and multiple regression analyses with anxiety as the dependent variables were conducted to assess these …

    uab Repository record for “Who All Gon Be There”: The Relationship Between Racial Identity, Perceived Social Distance, And Anxiety Among People Of African Descent (opens in a new tab)

  19. Three-dimensional colloidal crystals: Crystallisation, deformation and grain boundaries

    … which can measure local grain boundary misorientations and structure as well as determine the crystal structure of the grains either side. We demonstrate the method’s utility by applying it to experimental real space coordinates of colloidal particles. In particular, we consider particle …

    oxford Repository record for Three-dimensional colloidal crystals: Crystallisation, deformation and grain boundaries (opens in a new tab)

  20. Analysis of slip transfer in TI-5AL-2.5SN (WT. %) at two temperatures in comparison to pure aluminum

    … residual Burgers vectors, and grain boundary misorientation were computed for boundaries showing evidence of slip transfer and boundaries showing no evidence of slip transfer. This work is compared to a similar study of an Aluminum oligo-crystal to aid in understanding the differences in slip …

    msu Repository record for Analysis of slip transfer in TI-5AL-2.5SN (WT. %) at two temperatures in comparison to pure aluminum (opens in a new tab)

Page 1 of 11