Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Mixed-Mode I/II"”.
-
ANALYSIS OF MIXED MODE I/II FAILURE OF SELECTED STRUCTURAL CONCRETE GRADES
… betonu vlivem kombinovaného módu namáhaní I/II. Tento typ poškození je studován na různých třídách a typech betonu, které se běžně používají při výrobě prefabrikovaných dílců. Pro tuto analýzu, jak experimentální, tak i numerickou, bylo použito těleso tvaru brazilského disku s centrálním …
-
Mixed mode I-II-III fracture criterion and its application to cement mortar
… and slightly ductile materials under pure mode III loading, the closure analysis of an infinitesimal crack extension has been carried out, and relationship between the stress intensity factor and energy release rate established. On the basis of the unified model, which specifies the …
-
Experimental and Simulation Predicted Crack Paths For AL-2024-T351 Under Mixed-Mode I/II Fatigue Loading Using An Arcan Fixture
Mixed mode I/II fatigue experiments and simulations are performed for an Arcan fixture and a 6.35mm thick Al-2024-T351 specimen. Experiments were performed for Arcan loading angles that gave rise to a range of Mode I/II crack tip conditions from 0 ¡Ü ¦¤KII/¦¤KI ¡Ü ¡Þ. Measurements include the crack …
-
An experimental investigation of mixed-mode fracture I/II/III of PMMA and aluminium 7075-T6
This thesis has studied the mixed-mode I/II/III fracture of the specimens made of PMMA and Al7075-T6 materials. In doing so, a hybrid experimental-numerical approach using a custom-made hardware/software test-bed and Finite Element Analysis (FEA) was employed. To apply mixed-mode I/II/III loading …
-
Response and Failure of Adhesively Bonded Automotive Composite Structures under Impact Loads
… Based on the use of a modified drop tower, mode I, II, and mixed mode values for critical energy release rate were determined for a composite/epoxy system and used to create a fracture failure envelope. Because load measurements become erratic and unreliable at higher test rates, …
-
Analytic Solutions for the Crack-Tip Plastic Zone under Mixed Mode Loading Conditions
… region surrounding a crack tip are derived under mixed mode I/II and mixed mode I/II/III loading conditions for an elastic-plastic solid with a semi-infinite crack. Both the Von Mises and Tresca yield criteria are applied. Additionally, plane stress and plane strain assumptions are included when …
-
Crack tip plasticity in mixed mode loading under contained yielding conditions
Mode I, mode II and mixed mode I/II asymptotic crack tip fields have been studied under contained yielding conditions using plane strain and plane stress boundary layer formulations. The effect of the non-singular term in the asymptotic elastic expansion (Williams, 1957) on the plastic zone at the …
-
Elastic-plastic crack problems in the ductile-brittle transition
… mapping technique was discussed that allows mode I toughness to be translated into mixed-mode I+II toughness for stress controlled fracture. In support of the arguments, toughness of Mode I and mixed-mode I+II configurations was measured on a mild steel. The experimental data clearly show …
-
Dynamic Mixed-Mode Fracture of Bonded Composite Joints for Automotive Crashworthiness
An experimental evaluation of the mixed-mode fracture behavior of bonded composite joints is presented. Commonly used experimental techniques for characterizing the mode I, mixed-mode I/II, mode II, and mode III fracture behavior have been employed for the purpose of developing a fracture envelope …
-
Three-Dimensional Mixed-Mode Fracture of the Four-Point Shear Specimen
… fracture toughness of specimens undergoing pure mode I loading, often simplified by 2D assumptions of plane strain or plane stress. In reality, components have finite-thickness, and often see complex loading configurations. To study this complex behaviour, mixed-mode fracture specimens been …
-
A Triaxiality-Dependent Constitutive Model For Predicting Damage-Induced Softening in 3D-Printed Soft Suture Layer
… new challenges appear in constitutive modeling and the prediction of damage initiation and evolution of 3D printed materials. To meet this need in the field, the model and methodology developed in this thesis is the first effort made in constitutively modeling the damage initiation and …
-
Numerical Study of Stable Tearing Crack Growth Events Using the Cohesive Zone Model Approach
… engineering structures. The cohesive zone model (CZM) has been widely applied to simulate fracture processes in a variety of material systems. However, its application to the study of elastic-plastic stable tearing crack growth events in ductile materials, especially under mixed-mode …
-
Investigation on the impact damage of glass using the combined finite/discrete element method
… (FEM/DEM) was employed in this thesis. The mode I fracture model was extended for glass by changing the strain softening curve to a bilinear-like exponential decay shape. Analysis based on this model was performed and numerical examples in both 2D and 3D were investigated. Parametric study …
-
Characterization of Mechanical Properties at the Micro/Nano Scale: Stiction Failure of MEMS, High-Frequency Michelson Interferometry and Carbon NanoFibers
… are determined experimentally through Mode II and mixed Mode I&II crack propagation experiments. Furthermore, the description of a high-frequency Michelson Interferometer is discussed for imaging of crack propagation of the μcantilevers with their substrate at the nano-scale and …
-
Investigation into the Effect of Physical Size on Crack Initiation in Brittle Materials Subject to Mixed Mode Fracture (With Focus on Graphite Nuclear Reactor Cores)
… and fracture toughness. Scaling behaviour of mixed mode (I/II) fracture is also examined experimentally and through FEA. In total, data from over 750 specimens is presented. The project’s experimental work is in agreement with the literature; showing a negative correlation between size and …
-
Effects of Bondline Thickness on Nonlinear Interfacial Fracture of Bonded Adhesive Joint
… for its extensive applications to a variety of modern industries. In the recent two decades, cohesive zone models (CZMs) have been receiving intensive attentions for fracture problems of adhesively bonded joints due to its fairly simple and accurate predictive ability. In CZMs the nonlinear …
-
BEM solutions for linear elastic and fracture mechanics problems with microstructural effects: problems with microstructural effects
… Gradient Elasticity Theory (Mindlin’s Form II) has been employed. The fundamental solution of the 4th order partial differential equation, that describes the aforementioned theory, has been derived and the integral equations that govern Mindlin’s Form II Gradient Elasticity Theory have been …
-
ΔΙΕΡΕΥΝΗΣΗ ΜΗΧΑΝΙΣΜΩΝ ΨΑΘΥΡΗΣ ΘΡΑΥΣΗΣ ΜΑΡΜΑΡΩΝ ΓΙΑ ΜΙΚΤΟ ΤΥΠΟ Ι-ΙΙ ΦΟΡΤΙΣΗΣ
… AND EXPERIMENTAL STUDY OF A CRACK GROWTH IN A MIXED MODE I-II LOADING IS PERFORMED. 2 CASES ARE EXAMINED: THE THREE POINT BENDING AND THE UNIAXIAL COMPRESSION. FOR THE 1 CASE MARBLE BEAMS WITH AN ARTIFICIAL CRACK OF 8MM AND 10MM LONG EACH, LOCATED IN DIFFERENT DISTANCES BETWEEN THE CENTRE OF …
-
AN EXPERIMENTAL STUDY ON THE FRACTURE BEHAVIOUR OF TOUGHENED RESINS UNDER MIXED MODE LOADS
… of particle induced toughening mechanisms in mixed-mode remains complex and calls further exploration. The sponsoring organization of this project conducts advanced research in developing methodologies that characterize fracture behaviour of particulate toughened polymers. This study has …
-
Coupled SGBEM-FEM for efficient simulation of height-contained hydraulic fractures
An efficient computational model is developed to simulate the growth of vertically oriented, height-contained hydraulic fractures. A symmetric Galerkin boundary element method, used to model the behavior of the fracture, is specialized by exploiting knowledge of the fracture surface geometry and an …
Page 1 of 2