Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Mixer-first"”.

  1. Analysis And Design Of Wideband Passive Mixer-First Receivers

    … single RF front-end architecture type: a passive mixer connected directly to the antenna port of the radio, without an LNA or matching network up front. This structure is inherently wideband which allows for a single receiver front-end to operate at a wide range of frequencies, as tuned by its …

    cornell Repository record for Analysis And Design Of Wideband Passive Mixer-First Receivers (opens in a new tab)

  2. Reconfigurable RF front end: A mixer-first architecture and tunable filters

    … a reconfigurable RF receiver system, namely a mixer-first receiver system and an on-chip tunable bandpass filter, are reviewed and verified. For the mixer-first receiver, a pure passive mixer called distributedly modulated capacitor (DMC) is introduced and analyzed, then simulation in ADS is …

    uiuc Repository record for Reconfigurable RF front end: A mixer-first architecture and tunable filters (opens in a new tab)

  3. Wideband Highly Integrated Software-Defined Radio For Duplex Communication

    The passive mixer-first architecture has been known as the most promising solution for wideband, fully integrated software-defined radios. In this dissertation, a comprehensive model of N-phase passive mixer receivers is firstly introduced to analyze and design for optimized performance in this new …

    cornell Repository record for Wideband Highly Integrated Software-Defined Radio For Duplex Communication (opens in a new tab)

  4. CMOS integrated commutated circuits for interference filtering at radio-frequency

    Two ways of interference filtering, namely mixer-first receiver with acoustic filter load and N-path low pass filter (LPF), are presented and verified. The passive mixer-first architecture provides high linearity and reconfigurability. The acoustic load at intermediate frequency ensures good …

    uiuc Repository record for CMOS integrated commutated circuits for interference filtering at radio-frequency (opens in a new tab)

  5. ENERGY-EFFICIENT OOK TRANSMITTER AND SUB-SAMPLING OOK/FSK WURXS WITH PULSE-DRIVEN MEMS OSCILLATOR

    … power drops to 13.8 μW at 3 Mbps. Additionally, mixer-first and LNA-first sub-sampling WuRX architectures are proposed to support both OOK and FSK demodulation. Utilizing a 0.14% bit-level duty-cycling approach, the mixer-first WuRX consumes 900 nW at 64 bps with −79/−73 dBm sensitivities, while …

    nus Repository record for ENERGY-EFFICIENT OOK TRANSMITTER AND SUB-SAMPLING OOK/FSK WURXS WITH PULSE-DRIVEN MEMS OSCILLATOR (opens in a new tab) Download file for ENERGY-EFFICIENT OOK TRANSMITTER AND SUB-SAMPLING OOK/FSK WURXS WITH PULSE-DRIVEN MEMS OSCILLATOR (opens in a new tab)

  6. Modification of Track and Hold Networks for Improved Bandwidth and Sampling Accuracy in High-Q Antenna Systems

    Increased interest in mixer-first receiver architectures has been primarily driven by the need for compact receivers capable of operating across a wide range of frequencies, particularly in edge devices and software-defined radios (SDR). Matching between a receiving antenna and subsequent RF …

    tamu Repository record for Modification of Track and Hold Networks for Improved Bandwidth and Sampling Accuracy in High-Q Antenna Systems (opens in a new tab)

  7. Integrated radio frequency circuits for wideband receivers

    … to use the N-pathfilter is the 0.7-to-2.7-GHz mixer-first receiver that was implemented together with a wideband CCE antenna. The work highlights the key challenges when wideband interfaces are implemented and suggests a solution to circumvent part of the challenges. The integrated circuit …

    aalto Repository record for Integrated radio frequency circuits for wideband receivers (opens in a new tab)

  8. Circuits for Wireless Sensing

    … sensing, divided into two main parts. The first part focuses on receivers designed primarily for the mmwave range using sub-harmonic down-conversion to relax the phase noise and power consumption requirements of generating a local oscillator (LO) signal. An LTI analysis method for passive …

    cornell Repository record for Circuits for Wireless Sensing (opens in a new tab)

  9. Synthetic Diversity for Flexible Interference-Tolerant Receivers

    … to validate the proposed concepts. Passive mixer-first versions of the same receiver architecture are also explored for improved performance and additional capabilities.

    cornell Repository record for Synthetic Diversity for Flexible Interference-Tolerant Receivers (opens in a new tab) Embargoed until 2027-06-05

  10. Ultra-wideband and highly linear 43-97 GHz receiver front-end

    … W-bands. The front-end incorporates a passive mixer-first topology to achieve high linearity and wideband performance along with an optimum operational instantaneous bandwidth. In addition, it implements the multi-gate gm3 cancellation technique at the IF amplifiers to preserve the linearity …

    gatech Repository record for Ultra-wideband and highly linear 43-97 GHz receiver front-end (opens in a new tab)

  11. Energy Efficient Wireless Circuits for IoT in CMOS Technology

    … The receiver has a frequency multiplication mixer, which uses a 300 MHz clock from a local oscillator (LO). The local oscillator is implemented using vertical delay cells to reduce power consumption. The receiver conversion gain is 40 dB and the receiver noise figure (NF) is 14 dB. The …

    tamu Repository record for Energy Efficient Wireless Circuits for IoT in CMOS Technology (opens in a new tab)

  12. Adaptive RF/mmWave Circuit Architectures for Spectrum-Dense Networks

    … which band can be accessed. N-path passive mixer-first receivers have been explored to meet this need based on their easily tuned center frequency and bandwidth, combined with extremely high linearity with respect to Out-Of-Band (OOB) blockers. In addition, many radio systems today require …

    cornell Repository record for Adaptive RF/mmWave Circuit Architectures for Spectrum-Dense Networks (opens in a new tab)

  13. Flexible Receivers in CMOS for Wireless Communication

    … in combination with a bootstrapped passive mixer. Paper II builds on the idea of 8-phase harmonic rejection, but simplifies it to a 6-phase solution that can reject noise and interferers at the 3rd order harmonic of the local oscillator frequency. This provides a good trade-off between the …

    lund Repository record for Flexible Receivers in CMOS for Wireless Communication (opens in a new tab) Download PDF for Flexible Receivers in CMOS for Wireless Communication (opens in a new tab)

  14. Design of Low-Power CMOS Integrated Systems: from Biomedical Applications to Optical Links

    … frequency regimes from sub-kHz to near-infrared.First, an analog SoC for real-time signal processing of neural action potentials is implemented by integrating a low-noise neural recording front-end with an unsupervised spike sorting classifier. A hardware-optimized, K-means based algorithm is …

    penn Repository record for Design of Low-Power CMOS Integrated Systems: from Biomedical Applications to Optical Links (opens in a new tab)

  15. Area and Power Reduction Techniques for Millimeter-Wave Phased-Array Transceiver Front-ends

    … the noise figure (NF) of a conventional passive mixer-first RX by placing an extra gain of ~5dB prior to the down-conversion mixers with minimal additional components. In addition to the Gm-assisted MN, this prototype phased-array RX integrates a proposed Gm-assisted MN, mixer-first RX with …

    washington Repository record for Area and Power Reduction Techniques for Millimeter-Wave Phased-Array Transceiver Front-ends (opens in a new tab)

  16. An Antenna Integrated Low-Noise Receiver for mm-Wave Wideband, High-Datarate Communication

    … of this, this thesis presents the design of a mixer-first receiver for use at H-band frequencies which contains no front-end RF amplifier. Instead, the proposed receiver utilises a single-balanced topology consisting of an input RF quadrature hybrid, a single-balanced transconductance mixer, a …

    chalmers Repository record for An Antenna Integrated Low-Noise Receiver for mm-Wave Wideband, High-Datarate Communication (opens in a new tab)

  17. Multi-band reconfigurable RFICs in Si-based technologies for a compact and adaptive RF front-end

    … a direct quadrature down-conversion mixer first receiver with active channel select filters has been designed. The receiver supports 200MHz instantaneous RF bandwidth and can be reconfigured to receive any 200 MHz channel within 18-50 GHz frequency range. With the ever-evolving …

    msu Repository record for Multi-band reconfigurable RFICs in Si-based technologies for a compact and adaptive RF front-end (opens in a new tab)

  18. Design of Low Power Integrated Radios

    … in the frequency range of 2.36 GHz to 2.484 GHz. First, an IEEE 802.15.6 compliant 2360-2484MHz multiband transmitter is presented that digitally multiplexes the appropriate phases from an 800MHz poly-phase filter output to generate π/4 DQPSK signals at 2.4GHz using injection locking. Modulation …

    umn Repository record for Design of Low Power Integrated Radios (opens in a new tab)

  19. Impedance- and spatial-domain aliasing in interference management techniques

    Submission published under a 24 month embargo labeled 'Closed Access', the embargo will last until 2024-12-01

    uiuc Repository record for Impedance- and spatial-domain aliasing in interference management techniques (opens in a new tab)