Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Mixing speed"”.
-
Effect of conditioning on the performance of a plate and frame filter press
… to determine optimum polymer dosages for various mixing intensities produced during conditioning by a high-stress mixing unit. Mean velocity gradient (G) values were established for each of the mixing speeds used ranging from 250 sec-1 to 4,000 sec-1. Using the optimum conditioning dosages …
-
Increasing the efficiency of anaerobic waste digesters by optimising flow patterns to enhance biogas production
… mix digesters is well-recognised, the level of mixing required and its effects on biogas production are not clear. Here, the effects of mixing speed in mechanically-mixed lab-scale digesters on biogas production are considered. For the first time, positron emission particle tracking was used to …
-
Diffusion coefficient from hydrogen ion exchange studies
… ion.</p><p>Experimentation employed the use of a mixing vessel with a two bladed propellor into which a solution of known ion concentration was kept at a constant temperature and mixing speed. Dowex 50 x -8 hydrogen ion type resin was added to the solution and by means of a pH meter the time …
-
Effects of surfactants and Fenton's reagents on extraction and destruction of phenanthrene in spiked sand
… economic considerations such as reaction time, mixing speed, concentrations of surfactants and concentrations of Fenton's reagents. Surfactants could effectively dissolve phenanthrene from the spiked sand. In the absence of surfactants, Fenton's reactions could efficiently decompose the target …
-
A laboratory investigation of anaerobic sludge digestion for dairy manure
… manure, and to investigate the effects of sludge mixing on reduction of total volume, total solids, volatile solids and on gas production. The laboratory equipment was built and was operated continuously for three months. The data collected indicated that continuously mixed digesters were …
-
Kinetics of protein aggregate growth and breakage during isoelectric precipitation
… mean residence time, ionic strength, mixing speed, and order of addition of salt were investigated;The particle size distribution (PSD) of the solid phase was determined using a Coulter Counter Model TAII equipped with a 70 (mu)m diameter aperture tube. Protein recoveries after …
-
Lipid Binding in Worked Wheat Flour Doughs
… lipid binding during the initial stages of dough mixing. Varying the moisture content of such doughs showed that there was a “critical” moisture content below which mechanical work did not cause any appreciable increase in lipid binding. Above this moisture content there was a very rapid binding …
-
Adsorption of nickel and lead with activated sludge
… as sludge concentration, metal concentration, mixing condition, temperature, and pH value were studied. Models for predicting the amount of Nickel and Lead in the sludge were also developed.</p><p>The results of this experiment show that wide ranges of concentrations of Nickel and Lead (i.e., …
-
Optimisation and analysis of injector geometry on a centre-bodiless continuous rotating detonation rocket engine
… flows could be categorised into two stages, the mixing phase where the mixing efficiency rose rapidly and the dampening phase where the mixing efficiency value stabilise over the length of the flow. The stabilised flow was found to remain relatively constant over the DOF ranges explored. …
-
Development of High Efficiency Partial Nitrification as a First Step of Nitrite Shunt Process using Ammonium-Oxidizing Bacteria (AOB)
… using a constant air flow rate with a variable mixing speed using a Sequential Batch Reactor (SBR). The SBR has been successfully running at NLR of 1.2 kg/ (m3.d) maintaining an ammonia removal efficiency (ARE) of 98.6 ± 2.8% with a nitrite accumulation rate (NAR) of 93.0 ± 0.7%, which is 2 …
-
Polyurethenae foams and engineering education
… during which the impact of index of isocyanate, mixing speed, and the amount of physical blowing agent was characterized by a heat flow meter for [subscript], and a pycnometer for the foam density and closed cell content. Besides, heat capacities (𝐶𝑃) of most common polyols and isocyanate in …
-
Novel Carbopol-Wax Blends for Controlled Release Oral Dosage Forms
… as granulation temperature, granulation time and mixing speed. At higher granulation temperature, the granulation process became sensitive to granulation time and mixing speed. Thus, for developing robust granulation process to prepare carbopol-wax blends, the granulation must be done with lower …
-
Effects of formulation and processing conditions on the physical properties of fat crystal networks
… conditions (scraped surface heat exchanger's mixing speed, coolant temperature, and throughput). Rheological studies were conducted to characterise the material properties of the fat systems. Viscosity measurements were carried out to study the effects of processing conditions on the material …
-
Laboratory studies using sodium-bearing waste simulant - ADL 26-94
… precipitation parameters such as impeller mixing speed, rate of base addition, amount of added calcium to SBW, and solution precipitation pH were studied to determine the conditions for each parameter to achieve optimal solids removal rates and resistance to filtration. The organic polymers …
-
Partial nitrification and oxygen transfer analysis utilizing hollow fiber membrane aeration
… coefficient. Reactor parameters, such as mixing speed, membrane length, and gas pressure, were evaluated to determine how K<sub>L</sub>a was affected by these variables.y This hollow fiber membrane was then used to control oxygen delivery to the partial nitrification system, producing an …
-
The preparation and characterization of stannous fluoride materials containing strontium
… as molar ratio, order of addition of reagents, mixing speed, time and temperature. The preparation of these materials is described here. The nature of the products was investigated by various analytical techniques, such as atomic absorption spectrophotometry, fluoride ion electrode analysis, …
-
Phagotrophic Phytoflagellates across Ecosystems: Their Functional Role in the Southern Ocean and Mid-Atlantic Vernal Pools
… concentrations of polyester microfibers and mixing speeds to determine if microfiber interactions with colony formations increases or decreases overall colony buoyancy. Smaller concentrations of polyester microfibers can impart a positively buoyant effect onto P. antarctica colonies …
-
Effective removal of ammonia from the drinking water system : a case study at Magalies Water
… species dosage (magnesium and phosphate), mixing speed, and contact time. State-of-the-art analytical instruments were used to underpin the fate of chemical species. The chemical compositions of the samples were ascertained in an ISO-accredited laboratory following standard methods. …
-
Mixing of nanoparticles in a stirred tank in high pressure carbon dioxide
Mixing of nanoparticles of different compositions offers wide opportunities in manufacturing new nanocomposite materials with unique electronic, optical, mechanical, and chemical properties. However, due to large cohesive forces between nanoparticles, they often form large micron-sized …
-
Seasonal and Dilution Rate Impacts on Nannochloropsis oceanica Productivity in Algae Raceway Ponds
… medium, pond depth, pH range, paddle wheel mixing speed, and replete nutrient conditions for the duration of the study. Two cultivation regimes were used to regulate pond biomass concentration: batch growth and a three-times-per-week dilution with a resulting dilution rate of 0.21/d. For the …
Page 1 of 3