Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"MnDOT"”.
-
An investigation of reflective cracking and empirical development of design specifications for precast composite slab span system (MnDOT PCSSS) superstructures.
… by the Minnesota Department of Transportation (MnDOT) based on the French Poutre Dalle slab span bridge system. The MnDOT design, which is a precast composite slab span system (PCSSS), is practical for short to moderate spans up to approximately 65 ft. The PCSSS design requires no formwork or …
-
Tightening the large diameter anchor bolts of sign, signal, and luminaire structures
… of Transportation (DOT) across the US, including MnDOT, are experiencing problems associated with loose anchor bolts used in support structures (e.g., overhead signs, high-mast light tower (HMLT), and tall traffic signals). Specifically, MnDOT inspection crews have found loose nuts at most anchor …
-
Water Use at Minnesota Rest Areas
The Minnesota Department of Transportation (MnDOT) State Wide Rest Area Program is composed of a coordinated system of public rest areas and waysides that are intended to help motorists travel safer. In 1979, MnDOT collected data at rest areas to refine assumptions and improve techniques for design …
-
Investigation of early age cracking in concrete bridge decks
Despite recent changes to MnDOT mix designs, transverse cracking has still been observed shortly after the bridge deck is poured. The goal of this research was to determine the causes of this cracking and to propose deck reinforcement or mix design practices that efficiently mitigate the problem. …
-
Effects of Mix Design Parameters on Indirect Tensile Strength and Field Cracking Performance of Asphalt Pavements
… by the Minnesota Department of Transportation (MnDOT) asphalt material specification, as part of acceptance criteria. This significantly increases the risk for poor transverse cracking performance. The objective for this research study is to analyze the effects of mix design parameters on the …
-
Freezing and thawing of frost-susceptible soils : (development of a reliable predictive model)
… by Minnesota Department of Transportation (MnDOT). Additionally, The Gilpin's mechanistic-empirical model was employed to predict frost heave. The model produced inaccurate and counterintuitive results in some cases. Therefore, the model was modified and the empirical frost depth model …
-
Auto-Calibration of WIM Using Traffic Stream Characteristics
… utilized by ARDOT and the Minnesota DOT (MNDOT) were developed. Parameters for the algorithms are based on combinations that produced minimal MAPE at the study sites. WIM data from two sites (Lamar and Lonoke) and static scale data from one site (Alma) were collected along Eastbound I-40 …
-
Develop a price escalation method for Minnesota Department of Transportation indefinite delivery/indefinite quantity contracts: AxE bidding
… for the Minnesota Department of Transportation (MnDOT).</p> <p>The proposed escalation method is the result of a comprehensive literature review and detailed case study analysis that benchmarked the state-of-practice in IDIQ contracting in the transportation industry. DOT contractual information …
-
Utilizing Waste Material From Minnesota For Stormwater Management Purposes
… for the Minnesota Department of Transportation (MnDOT) engineers.
-
Recommendations for Data Collection and Analysis During Field Testing of Ground Penetrating Radar Used to Measure Bituminous Asphalt Compaction
MnDOT, as part of a multistate pooled fund project, is developing procedures that use ground penetrating radar for QA/QC in the placement of bituminous asphalt pavement. In July 2020, over 400,000 measurements were collected (using the GSSI PaveScan RDM 2.0) from a 5.5-mile stretch of US Highway 2 …
-
Validation of prestressed concrete I-Beam deflection and camber estimates.
… The Minnesota Department of Transportation (MnDOT) uses the release camber calculations, based on gross section properties and elastic shortening losses, and a multiplier method to predict the camber at release and erection, respectively. An accurate estimate of camber at erection is …
-
HOT or Not: driver elasticity to price and alternative pricing strategies on the MnPASS HOT Lanes
The Minnesota Department of Transportation (MnDOT) has added MnPASS High Occupancy Toll (HOT) lanes on two freeway corridors in the Twin Cities. While not the first HOT lanes in the country, the MnPASS lanes are the first implementation of road pricing in Minnesota and possess a dynamic pricing …
-
Chemicals of Emerging Concern in Minnesota Subsurface Sewage Treatment Systems
… effluent, groundwater, and soil around three MNDOT rest area SSTS and one septage field application site. The second study is a complimentary laboratory soil column study that quantified CEC concentrations within a soil column and corresponding wheat samples following a known septage …
-
Protocols and Criteria for Acoustic Emission Monitoring of Fracture-Critical Steel Bridges
… of the Minnesota Department of Transportation (MnDOT). Developing health monitoring systems for fracture-critical bridges is an essential objective in meeting the stated goal. This report documents the implementation of two, 16-sensor, acoustic emission monitoring systems in one of the tie …
-
Cracking Performance Evaluation of Minnesota Asphalt Pavements
… of asphalt mixes currently being used by MnDOT typically have higher permeability rates than the typical range for dense graded asphalt mixtures, which makes these pavement sections more susceptible to moisture-induced damage. Next, this study analyzed the transverse and longitudinal field …
-
Mechanistic-Empirical Evaluation of Mn/ROAD Mainline Flexible Pavement Sections
… was performed at the University of Illinois, MnDOT and the University of Minnesota. Field characterization of the paving materials was performed through FWD and DCP testing. The effect of granular material quality on pavement response and performance was assessed through analysis of FWD data. …
-
Traffic Monitoring System Using In-Pavement Fiber Bragg Grating Sensors
… of Minnesota Department of Transportation (MnDOT) in MN. A vehicle classification system based on the proposed sensor network has been validated. The vehicle classification system uses support vector machine (SVM), Neural Network (NN), and K-Nearest Neighbour (KNN) learning algorithms to …
-
Understanding Causes Of Concrete Culvert Pipe Joint Separation
… of Minnesota Department of Transportation (MnDOT) was investigated and a machine learning model (Random Forest) had been developed and then finite element model of round concrete culverts were created to investigate the potential of separation because of axial demands on culvert segments, …
-
Investigation of winter tenting of transverse cracks in asphalt pavement
… from the Minnesota Department of Transportation (MnDOT) road performance database with a computer application named Highway Pavement Management Application (HPMA). The effectiveness of different maintenance measures was computed based on their percentage change in the international roughness index …
-
Full-depth precast concrete bridge deck system: phase II
The Minnesota Department of Transportation (MnDOT) developed a design for a precast composite slab span system (PCSSS) to be used in accelerated bridge construction. The system consists of shallow inverted-tee precast beams placed between supports with cast-in-place (CIP) concrete placed on top, …
Page 1 of 2