Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Mo-Si-B"”.
-
Thermal expansion behavior of Mo-Si-B system intermetallics
<p>Currently, industrial, automotive, and aerospace areas have a need for structural materials that can withstand oxidizing and aggressive environments at temperatures above 1000 0C. Mo-Si-B system intermetallics have been attracting attention as promising candidate materials for such applications, …
-
Microstructure-sensitive structure-property modeling tools for triplex Mo-Si-B alloys
… to Ni-base superalloys. In particular, Mo-Si and Mo-Si-B intermetallics offer excellent oxidation and creep resistance at temperatures up to 1400°C. However, these intermetallics present a significant design challenge due to their low ductility and low fracture toughness at room …
-
Characterization of phase transformations for Mo-Si-B system around T1 phase region
<p>Previous investigation on the Mo-Si-B phase diagram was reviewed. Six Mo-Si-B samples around T1 region were studied to characterize phase transformations using chemical analysis, X-ray diffraction analysis, differential thermal analysis, and scanning electron microscopy. The studies were focused …
-
Characterization of electrical resistivity as a function of temperature in the Mo-Si-B system
Measurements of electrical resistivity as a function of temperature from 25 to 15000C were conducted on polycrystalline samples in the Mo-Si-B system. Single phase, or nearly single phase, samples were prepared for the following phases: M03Si, Mo5SiB2, MO5Si3B[Subscript x], MoB, MOSi2, and MO5Si3. …
-
Microstructures and oxidation behaviors of the Nb-Si-B and Nb-Mo-Si-B intermetallics
<p>Two ternary phases in Nb-Si-B system, T2(Cr5B3-type tetragonal structure) and D88(Mn5Si3-type hexagonal structure), were prepared. The oxidation resistances of both T2 and D88 were found better than binary Nb5Si3 at 1000 0C, but still inadequate. The oxide scale is the mixture of Nb2O5 and …
-
Oxidation behavior and chlorination treatment to improve oxidation resistance of Nb-Mo-Si-B alloys
<p>Microstructure and oxidation of M-Si-B alloys, where M=Nb, Mo and (Nb,Mo) with phase assemblies T1(Mo5Si3B[subscript x])-MoSi2-MoB, T1T2(Mo5SiB2)- Mo3Si, Mo- T2- Mo3Si in Mo-Si-B system, T2 (Nb5(Si,B)3), D88(Nb5Si3B[subscript x]) in Nb-Si-B system, and T1-T2-D88 in (Nb,Mo)-Si-B system were …
-
Deposition and characterization of advanced mullite-based thermal barrier coatings on Mo-Si-B turbine materials
Includes bibliographical references (pages 185-198).
-
Processing of Mo-Si-B intermetallics by extrusion and oxidation properties of the extruded T1-MoSi2-MoB system
An extrusion process was developed that is able to consistently produce large quantities of Mo-Si-B rods without the presence of defects. Binder removal from the extruded rods was studied in detail and it was determined that heating rates on the order of 0.020/minute (1.20/hour) are necessary to …
-
Development of oxidation resistant molybdenum-silicon-boron composites
The development of molybdenum - silicon - boron (Mo-Si-B) composites having a combination of high temperature strength, creep, and oxidation residence has the potential to substantially increase the efficiency of gas turbines. The refractory nature of the αMo, Mo3Si (A15), and Mo5SiB2 (T2) phases …
-
Fabrication, strength and oxidation of molybdenum-silicon-boron alloys from reaction synthesis
Mo-Si-B alloys are a leading candidate for the next generation of jet turbine engine blades and have the potential to raise operating temperatures by 300-400°C. The alloys of interest are a three-phase mixture of the molybdenum solid solution (Moss) and two intermetallic phases, Mo3Si (A15) and …
-
Oxidation and creep behavior of Mo5Si3 based materials
<p>Mo[subscript]5 Si[subscript]3 shows promise as a high temperature creep resistant material. The high temperature oxidation resistance of Mo[subscript]5 Si[subscript]3 has been found to be poor, however, limiting its use in oxidizing atmospheres. Mo [subscript]5Si[subscript]3 exhibits mass loss …
-
Developing a high temperature, oxidation resistant molybdenum-silica composite
A new powder processing approach to produce oxidation resistant molybdenum alloys for high temperature use has been developed. Oxidation protection is provided by fine dispersion of silica glass particles within a molybdenum matrix. As the molybdenum oxidizes, the glass is exposed and melts to form …
-
M5Si3 (M=Ti, Nb, Mo) based transition-metal silicides for high temperature applications
<p>Transition metal silicides are being considered for future engine turbine components at temperatures up to 1600ºC. Although significant improvement in high temperature strength, room temperature fracture toughness has been realized in the past decade, further improvement in oxidation resistance …
-
Oxidation of zirconium diboride based and molybdenum based ultra-high temperature ceramics
<p>Designing resilient high temperature alloys has been a long-standing engineering challenge. The driver for high temperature material research ranges from the need of developing robust thermal protection systems for hypersonic vehicles to increased operating temperatures (and hence Carnot …