Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 70 for “"Modal Testing"”.

  1. Vehicle structure characterization using experimental modal testing techniques

    … procedure to carry out EMTT (experimental modal testing techniques), on both small and large vehicle structures.

    concordia Download PDF for Vehicle structure characterization using experimental modal testing techniques (opens in a new tab)

  2. Modal testing and analysis of the NPS Space Truss.

    This thesis deals with modal testing and analysis of the Naval Postgraduate School (NPS) Space Truss. A finite element model (FEM) was developed for the truss using a MATLB program called NRLFEMI (developed at the Nava1 Research Laboratory). Analytical predictions of the natural frequencies for …

    nps Repository record for Modal testing and analysis of the NPS Space Truss. (opens in a new tab)

  3. Modal Testing And Analysis Techniques And Their Application On A Small UAS

    … structural analysis using contemporary testing techniques. This includes modal testing topics such as data acquisition, data processing, sensor placement, and multiple excitation methods. It also presents a novel sensor placing procedure that uses a laser vibrometer to identify key …

    nodak Repository record for Modal Testing And Analysis Techniques And Their Application On A Small UAS (opens in a new tab)

  4. A numerical simulation of modal testing on a structure with viscous damping

    … steady-state sinusoidal multiple-shaker dynamic modal testing of a discretized structural model. The analytical grid model studied was assumed to be linear and to have viscous damping. Two cases of damping were investigated: the first did not couple the undamped normal modes, the second did. A …

    vt Repository record for A numerical simulation of modal testing on a structure with viscous damping (opens in a new tab)

  5. Modal characteristics of satellite appendages using on-orbit output-only modal testing

    Output-only modal testing is an attractive new technique with potential applications in civil, mechanical, and aerospace engineering. It may effectively be used for model validation, model updating, quality control, and health monitoring through the determination of modal characteristics of the …

    concordia Download PDF for Modal characteristics of satellite appendages using on-orbit output-only modal testing (opens in a new tab)

  6. Structural design, analysis, and modal testing of the Petite Amateur Navy Satellite (PANSAT).

    … The finite element analysis was verified by modal testing, correlating the fundamental mode of the finite element model with that of an engineering test structure.

    nps Repository record for Structural design, analysis, and modal testing of the Petite Amateur Navy Satellite (PANSAT). (opens in a new tab)

  7. Finite element analysis of smart structures and modal testing of a flexible spacecraft arm

    … and experimental determination of the modal frequencies and shapes associated with the arm portion of the Naval Postgraduate School's Flexible Spacecraft Simulator (FSS). A description of how piezoceramic sensors and actuators are incorporated in finite element modeling is presented. A …

    nps Repository record for Finite element analysis of smart structures and modal testing of a flexible spacecraft arm (opens in a new tab)

  8. Output-Only Experimental Modal Testing of Large Residential Structures and Acoustic Cavities Using Sonic Booms

    In this thesis, an output-only experimental modal testing and analysis technique known as the Natural Excitation Technique (NExT) is examined for use with large residential structures and interior cavities. The technique which assumes a random, stationary input causing the response data is reviewed …

    vt Repository record for Output-Only Experimental Modal Testing of Large Residential Structures and Acoustic Cavities Using Sonic Booms (opens in a new tab)

  9. Aeroelastic Modeling, Modal Testing, and Wind Tunnel System Identification of the MARGE II Aeroservoelastic Model

    … (FE) structural model through ground vibration testing to predict the wind tunnel frequency response well. In this thesis, an overview of the aeroelastic mathematical modeling, modal testing, and wind tunnel system identification process of MARGE II—the University of Washington's new …

    washington Repository record for Aeroelastic Modeling, Modal Testing, and Wind Tunnel System Identification of the MARGE II Aeroservoelastic Model (opens in a new tab)

  10. Dynamic response of width- and thickness-tapered composite beams using Rayleigh-Ritz method and modal testing

    … graphite-epoxy composite material. Experimental modal analysis using impact hammer testing is conducted for the determination of coherence function, time and auto-response function and Frequency Response Function (FRF) of width-tapered laminated composite beams. The natural frequencies obtained …

    concordia Download PDF for Dynamic response of width- and thickness-tapered composite beams using Rayleigh-Ritz method and modal testing (opens in a new tab)

  11. Experimental Modal Analysis of a Half-Scale Model Rear Twin-Engine Mounted Aircraft Fuselage Section

    Experimental modal testing using an impact hammer is a commonly used method for obtaining the modal parameters of any structure for which the vibrational behavior is of interest. Natural frequencies and associated mode shapes of the structure can be extracted directly from measured FRFs (Frequency …

    queens Repository record for Experimental Modal Analysis of a Half-Scale Model Rear Twin-Engine Mounted Aircraft Fuselage Section (opens in a new tab)

  12. DESIGN OF MACHINE TOOL CROSS BEAM USING METAL BIG AREA ADDITIVE MANUFACTURING

    … characteristics of the printed part using modal testing for comparison to finite element models.</p> <p>The MedUSA system consists of three robotic arms that each manipulate a gas metal arc welding (GMAW) torch. The three torches were used to simultaneously deposit the mBAAM replacement for …

    ut-knoxville Repository record for DESIGN OF MACHINE TOOL CROSS BEAM USING METAL BIG AREA ADDITIVE MANUFACTURING (opens in a new tab)

  13. A precision laser scanning system for experimental modal analysis: its test and calibration

    … used for dynamic measurements and experimental modal analysis. A laser scanning system that provides position accuracy, speed, and flexibility plays a key role in this technique. This thesis gives an overview of various laser scanning techniques and the requirements of a laser scanning system …

    vt Repository record for A precision laser scanning system for experimental modal analysis: its test and calibration (opens in a new tab)

  14. Vibration serviceability of long-span cast in-situ concrete floors.

    … hardware and software suitable for field modal testing and dynamic response measurements of prototype floor structures was commissioned as a part of this research. The facility is built up around the instrumented sledge hammer, which served as the main excitation source in modal testing, …

    whiterose Download PDF for Vibration serviceability of long-span cast in-situ concrete floors. (opens in a new tab)

  15. Investigating the Effects of Unfused Powder Damping in Laser Powder Bed Fusion

    … pockets of unfused powder for increased damping. Modal testing was completed to compare damping factors of beams with varying pocket geometries as well as number of pockets and pocket location. For the first three bending modes that were tested, an initial damping increase was observed when pocket …

    byu Repository record for Investigating the Effects of Unfused Powder Damping in Laser Powder Bed Fusion (opens in a new tab) Download PDF for Investigating the Effects of Unfused Powder Damping in Laser Powder Bed Fusion (opens in a new tab)

  16. Macroscopic non-destructive evaluation by modal analysis techniques

    … dissertation describes an investigation of modal analysis methods for the detection, location, and characterization of flaws or damage in a structure or machine. The type of damage considered in the research was restricted to narrow, rectangular slots in symmetric trapezoidal plates. Both …

    iastate Repository record for Macroscopic non-destructive evaluation by modal analysis techniques (opens in a new tab)

  17. Optimum Damping of Beam Vibrations Using Piezoceramic Transducers

    … realized and finally tested by a standard modal testing technique. Comparisons between different shunting configurations of the system are given and finally the experimental data are compared with ones obtained by the developed numerical code in order to verify the accuracy of the latter.

    vt Repository record for Optimum Damping of Beam Vibrations Using Piezoceramic Transducers (opens in a new tab)

  18. Dynamic Topology Optimization and Experimental Validation of Reinforcement for PCB Robotics

    … optimization routine and experimental testing, preliminarily demonstrate the optimization routine for various output metrics using commercial analysis software (specifically, Abaqus), and correlate the finite element model (FEM) with modal testing results for model validation. These …

    clemson Repository record for Dynamic Topology Optimization and Experimental Validation of Reinforcement for PCB Robotics (opens in a new tab)

  19. Design of a multi-DOF tuned mounting fixture for the Navy's mediumweight shock machine

    … shipboard shock characteristics based on modal testing and previous ship shock trial data. Equipment qualified in this manner could be highly relied on to survive in battle.

    nps Repository record for Design of a multi-DOF tuned mounting fixture for the Navy's mediumweight shock machine (opens in a new tab)

Page 1 of 4