Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Modal damping ratios"”.
-
Αντισεισμικός σχεδιασμός μεταλλικών κατασκευών με χρήση λόγων ιξώδους ιδιομορφικής απόσβεσης ή ιδιομορφικών συντελεστών συμπεριφοράς
… design of steel structure based on equivalent modal damping ratios is presented. According to this method the maximum seismic response of a steel structure is obtained by using spectrum analysis and the equivalent modal damping ratios. The basic idea of the method is the construction of an …
-
Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών πλαισίων με ιδιομορφικούς συντελεστές συμπεριφοράς και τρεις στάθμες επιτελεστικότητας
… of the non - linear system with the aid of the modal damping ratios which quantify the work of the material and geometrical non - linearities. The modal damping ratios for the first significant modes are identified through an iterative procedure, where the transfer function of the system is …
-
Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών διασυνδεδεμένων πλαισίων με χρήση τριών νέων μεθόδων
… first proposed method of seismic design utilizes modal damping ratios, while the second makes use of modal strength reduction factors resulting from the corresponding modal damping ratios. The basic idea of first two design method is related to the creation of an equivalent linear MDOF structure …
-
Χρήση τεχνητής νοημοσύνης για τον έλεγχο της δυναμικής απόκρισης των κατασκευών
… internal cracks. Dynamic parameters, including modal damping ratios and experimentally extracted mode shapes and frequencies, are estimated. The resulting linear non-autonomous system is numerically solved using the matrix method with time discretization. Non-stationary time series analysis …
-
The effects of cutouts in joists on the vibrational response of wood floors
… (RMS) acceleration, log-decrement damping ratio, and modal damping ratios. Included in the thesis are the results of a static test (load sharing) performed on the floors with and without cutouts in the joists.
-
Statistical system identification of structures using ARMA models
… present study focuses on the estimation of the modal properties, i.e., natural modal frequencies, modal damping ratios, and mode shapes, of a structural system under ambient vibration based on the response data of the structure and the statistical properties of the stationary loading process. …
-
Using a non-modal method for system identification of highly damped and high modal density mechanical structures
… is traditionally related to the estimation of modal parameters (natural frequencies, modal damping ratios, and mode shapes). Various well known modal methods often fail to extract these parameters for heavily damped structures with high modal densities due to the high coupling between densely …
-
Design, Modelling, Fabrication & Testing of a Miniature Piezoelectric-based EMF Energy Harvester
… prediction for the prototype tested. Two damping techniques are used to experimentally extract modal damping ratios to predict peak mechanical and electrical responses at resonance frequencies. The miniature prototype design is less than 30 mm in length with only 10 mm piezoelectric …
-
HYBRID CONTROL OF HUMAN-INDUCED VIBRATION
… with relatively low natural frequencies and modal damping ratios. These natural frequencies may sometimes fall in the range of frequencies of human movement, which can possibly excite the structure in resonance resulting in vibration serviceability issues. One of the available techniques to …
-
Computational and Experimental Investigation of Human Skull Dynamics
… optimization scheme together with experimental modal properties to extract the effective elastic parameters of the composite layers. The resulting parameters and modal damping ratios are showcased for a selection of cranial segments including the parietal, frontal, occipital, and temporal bones. …
-
The effects of raised access flooring on the vibrational performance of long-span concrete floors.
… concrete floors. The development of a new modal testing facility based on electrodynamic shaker excitation, which was capable of producing high quality estimates of the modal properties of full-scale floor structures, is described. This was subsequently utilised to determine the modal …
-
Use of Permanent Magnets to Improve the Seismic Behavior of Light-Framed Structures
… was also analyzed for different values of modal damping ratios. Over all about 60-80% of the input energy was dissipated by friction damping in all the cases. The slip resistance of a flexible permanent magnet sheet was also verified in the laboratory. Above all the magnetic properties of …
-
Development of design techniques for the avoidance of acoustic fatigue in aircraft box-type structures
… the direction along the axis of the PWT.</p> <p>Damping measurements for coupon specimens revealed that the CFRP coupons had higher loss factors than the GLARE coupons. Fatigue tests were carried out to generate fatigue data for CFRP and GLARE coupons. It has been found that the fatigue damage …
-
Structural Integrity Assessment Using Vibration Data
… are used. To this end, a new function, called Modal Sensitivity Values, has been proposed for identifying damage sensitive modes to be included in damage detection and location methods. It was also found that some success could be achieved if system identification and model updating procedures …
-
Direct Method of Generating Floor Response Spectra for Structures under Earthquake Excitations at Multiple Supports
… (GRS), "t-response spectra (tRS)", and basic modal information of primary and secondary structures, including natural frequencies, modal damping ratios, modal participation factors, and mode shapes, which can be readily obtained from modal analyses, are needed. A new combination rule for …
-
Vibration serviceability of long-span cast in-situ concrete floors.
… hardware and software suitable for field modal testing and dynamic response measurements of prototype floor structures was commissioned as a part of this research. The facility is built up around the instrumented sledge hammer, which served as the main excitation source in modal testing, …
-
Methods for identifying models of complex structures using information from measured vibrations
… The identified models refer to mathematical modal models as well as linear finite element models of structures, while the applications cover mainly ground/air vehicles and civil structures. The thesis is divided into three interrelated parts. Part A: Least-squares optimization methods are …
-
Αντισεισμικός σχεδιασμός επίπεδων κατασκευών οπλισμένου σκυροδέματος με ιδιομορφικούς συντελεστές συμπεριφοράς και διάφορες στάθμες επιτελεστικότητας
… the first significant modes of the frame. These modal strength reduction factors incorporate dynamic characteristics of the structure, different performance targets and different soil types. Thus, the proposed method can automatically satisfy deformation demands at all performance levels without …