Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 554 for “"Mode I"”.

  1. Experimentation of Mode I and Mode II Fracture of Uni-Directional Composites and Finite Element Analysis of Mode I Fracture Using Cohesive Contact

    … One of the most prevalent and limiting mode of failure within composite laminates is delamination, since it not only reduces a structures stiffness and strength, but can be very difficult to detect without the use of special non-destructive equipment. Industry testing organizations have …

    calpoly Repository record for Experimentation of Mode I and Mode II Fracture of Uni-Directional Composites and Finite Element Analysis of Mode I Fracture Using Cohesive Contact (opens in a new tab)

  2. Mode I fracture and durability of the CFRP -concrete interface bond

    The continual degradation of civil infrastructures worldwide has prompted the need for effective solutions, posing major challenges to those involved with reinforced concrete structures. Externally bonded fiber reinforced polymer (FRP) composites have proven to be an efficient means of …

    wvu Repository record for Mode I fracture and durability of the CFRP -concrete interface bond (opens in a new tab)

  3. Mode I Fracture Testing on Zirconium Foils Under Plane-stress Condition

    … with Zr foils. Combined with finite element modeling, scanning electron microscopy analysis, and digital image correlation analysis, the fracture behavior at a crack tip from both macroscopic strain analysis and microscopic dislocation motion analysis was achieved. The current study is …

    queens Repository record for Mode I Fracture Testing on Zirconium Foils Under Plane-stress Condition (opens in a new tab)

  4. Mode I Fracture Toughness Testing of Friction Stir Processed HSLA-65

    … stir welding for use in Naval construction, mode one elastic-plastic fracture toughness of friction stir processed HSLA-65 was determined using current ASTM 1820 and BS 7448 standards. Double-sided welds were used to achieve 12.7 mm thick samples. A constant feed rate of 100 mm/min was used …

    byu Repository record for Mode I Fracture Toughness Testing of Friction Stir Processed HSLA-65 (opens in a new tab) Download PDF for Mode I Fracture Toughness Testing of Friction Stir Processed HSLA-65 (opens in a new tab)

  5. Characterization and modeling of mixed-mode I+III fracture in brittle materials

    Mixed-mode I+III fracture in brittle materials presents spectacular, scale-independent pattern formation in nature and engineering applications; and it is one of the last remaining puzzles in linear elastic fracture mechanics. This problem has received much attention in the literature over the past …

    texas Repository record for Characterization and modeling of mixed-mode I+III fracture in brittle materials (opens in a new tab)

  6. ANALYSIS OF MIXED MODE I/II FAILURE OF SELECTED STRUCTURAL CONCRETE GRADES

    … napětí před čelem trhliny. Zatímco nelineární model je zaměřen na iniciaci a propagaci trhliny celým průřezem tělesa za použití materiálového modelu „Concrete Damage Plasticity“. Experimentální část je věnovaná analýze lomové odolnosti betonu v kombinovaném módu zatížení I/II pomocí obecného …

    brno-tech Repository record for ANALYSIS OF MIXED MODE I/II FAILURE OF SELECTED STRUCTURAL CONCRETE GRADES (opens in a new tab)

  7. Mixed mode I-II-III fracture criterion and its application to cement mortar

    … and slightly ductile materials under pure mode III loading, the closure analysis of an infinitesimal crack extension has been carried out, and relationship between the stress intensity factor and energy release rate established. On the basis of the unified model, which specifies the …

    nus Repository record for Mixed mode I-II-III fracture criterion and its application to cement mortar (opens in a new tab) Download file for Mixed mode I-II-III fracture criterion and its application to cement mortar (opens in a new tab)

  8. Mode I and Mode II Measurements For Stiction Failed Micro-Electro-Mechanical Systems

    … have constructed an apparatus to determine the Mode I, II, and III interfacial adhesion energies of MEMS devices failed on a substrate. Though our method is general, we are specifically focused on devices created using the SUMMiT V process. An apparatus has been constructed that has 8 …

    unm Repository record for Mode I and Mode II Measurements For Stiction Failed Micro-Electro-Mechanical Systems (opens in a new tab)

  9. Durability and mode-I fracture of fiber-reinforced plastic (FRP)/wood interface bond

    … developed, and this specimen is used to evaluate Mode-I fracture of interface bonds; interface fracture toughness data are experimentally obtained for dry, wet and 3-cycle aging conditions. (Abstract shortened by UMI.).

    wvu Repository record for Durability and mode-I fracture of fiber-reinforced plastic (FRP)/wood interface bond (opens in a new tab)

  10. Mode I and Mode II Fracture Toughness of Montney Shale under Confining Pressure

    … determining the crack stress thresholds. The Mode I fracture toughness under confining pressure was measured using SNDB samples with crack length to thickness ratios of about 0.2 and 0.4, respectively. The application of confining stress might induce tensile crack at the top of the SNDB sample …

    calgary Repository record for Mode I and Mode II Fracture Toughness of Montney Shale under Confining Pressure (opens in a new tab)

  11. Determination of Mode I Fracture Toughness, Tensile Strength and Adhesion of Compacted Clays

    Tensile strength and fracture toughness are two parameters used to define the ability of resisting fracture under tensile stresses. Adhesion of clays to metals is the strength of soil-metal interface. These properties of cohesive soils are fundamental and essential for geotechnical problems. Two …

    calgary Repository record for Determination of Mode I Fracture Toughness, Tensile Strength and Adhesion of Compacted Clays (opens in a new tab)

  12. SUBCRITICAL CRACK GROWTH UNDER MODE I, II, AND III LOADING FOR COCONINO SANDSTONE

    … the constant stress-rate test technique to modes II and III subcritical crack growth in rocks. The experimental results of the modes I, II and III tests show that the values of the subcritical crack growth parameters are similar to each other. The subcritical crack growth parameter n value …

    arizona-thes Repository record for SUBCRITICAL CRACK GROWTH UNDER MODE I, II, AND III LOADING FOR COCONINO SANDSTONE (opens in a new tab)

  13. Fracture Characteristics of Asphalt Concrete in Mode I, Mode II, and Mixed-Mode

    … above were used to develop and validate a new Mode II test for asphalt concrete. No previous literature was found that attempted to capture Mode II fracture energy in asphalt concrete, so a test was developed from an extensive review of Mode II tests in the fields of metal, plastic, and PCC. …

    uiuc Repository record for Fracture Characteristics of Asphalt Concrete in Mode I, Mode II, and Mixed-Mode (opens in a new tab)

  14. WEIBULL ASSESSMENT OF CLEAVAGE FRACTURE FOR STEELS UNDER MIXED-MODE I AND II LOADING

    … ductile fracture failure. The Weibull stress model has become widely acknowledged to characterize the statistical scatter of fracture toughness under pure mode I conditions. This study extends the Weibull stress framework into the mixed-mode I and II ductile-to-brittle transition (DBT) …

    nus Repository record for WEIBULL ASSESSMENT OF CLEAVAGE FRACTURE FOR STEELS UNDER MIXED-MODE I AND II LOADING (opens in a new tab) Download file for WEIBULL ASSESSMENT OF CLEAVAGE FRACTURE FOR STEELS UNDER MIXED-MODE I AND II LOADING (opens in a new tab)

  15. Mode-I fatigue fracture of interface for fiber -reinforced polymer composite bonded to wood

    For applications in civil infrastructure rehabilitation and new construction, wood is being reinforced with externally bonded laminates and fabrics of fiber-reinforced polymer (FRP) composites. The potential benefits of external reinforcement with bonded FRP composites have been demonstrated …

    wvu Repository record for Mode-I fatigue fracture of interface for fiber -reinforced polymer composite bonded to wood (opens in a new tab)

  16. On the Use of Fractal Void Analysis to Understand Brittle Mode I Compressive Fracture

    … of LE stress fields in the context of Mode I compressive fracture, yielding significant theoretical guidance for this intractable problem. Fractal void analysis consists of considering void surfaces as fractal, and applying what is termed the “small flaw assumption” to analyze stress …

    calgary Repository record for On the Use of Fractal Void Analysis to Understand Brittle Mode I Compressive Fracture (opens in a new tab)

  17. Deformation and Structure-Property Relations of Paper During Mode I Steady-State Crack Growth

    … to create and expand empirical knowledge of Mode I growing, quasi-static, steady-state, cracks in machine-made paper. The mechanical response of paper's heterogeneous network structure is complex and includes anisotropy, non-affinity, and visco-elasticity. However, I employ an incremental …

    gatech Repository record for Deformation and Structure-Property Relations of Paper During Mode I Steady-State Crack Growth (opens in a new tab)

  18. Fatigue crack growth prediction under mode I loading in friction stir aluminum alloy weld

    … crack growth tests. In the analytical part, a model was developed to predict mode I fatigue crack growth perpendicular to the friction stir weld line. The model takes into account the independent influences of weld microstructure and residual stresses on fatigue crack propagation. Comparison of …

    greece Repository record for Fatigue crack growth prediction under mode I loading in friction stir aluminum alloy weld (opens in a new tab)

  19. F/A-18A-D Hornet Current and Future Utilization of Mode I Automatic Carrier Landings

    … for recovering F/A-18A-D aircraft aboard the modern aircraft carrier. ORM is itself a subset of human factors and worthy of exploration in the aviation systems field. In proving the value of the ACLS, the author presents the following objectives: 1) describe the major components of the …

    ut-knoxville Repository record for F/A-18A-D Hornet Current and Future Utilization of Mode I Automatic Carrier Landings (opens in a new tab)

  20. A Mesh Objective Algorithm for Modeling Mode-I Cracks Using a Standard Finite Element Formulation

    … efficient mesh objective algorithm for modeling mode-I cracks is developed and implemented within a standard finite element formulation. The algorithm applies the crack opening displacements across the standard nodal degrees of freedom that is consistent with formalism of the …

    unm Repository record for A Mesh Objective Algorithm for Modeling Mode-I Cracks Using a Standard Finite Element Formulation (opens in a new tab)

Page 1 of 28