Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 232 for “"Mode II"”.
-
Mode II crack tip behavior in shape memory alloy Nitinol
… area. Particularly, a nitinol structure under Mode II and mixed-mode loading are discussed here. Also, finite element method is used to find the stress distribution within the structure upon Mode II and a mixed-mode loading.
-
Traction-separation law for CFRP-concrete interface fracture under mode II loading
… where the delamination is primarily due to Mode II facture. A significant amount of research has been conducted in this area, but there are concerns about interface durability. This study is based upon a fracture mechanics approach using Mode II single-shear tests to evaluate the durability …
-
Experimental and Numerical Study of Mode II Delamination in Laminated Composite Beams
… as well as structural-scale numerical models which accurately predict delamination behavior. In this thesis the end loaded split (ELS) specimen was used to experimentally investigate mode II delamination, which is less well understood than mode I delamination. Force-displacement data …
-
Mode I and Mode II Measurements For Stiction Failed Micro-Electro-Mechanical Systems
… have constructed an apparatus to determine the Mode I, II, and III interfacial adhesion energies of MEMS devices failed on a substrate. Though our method is general, we are specifically focused on devices created using the SUMMiT V process. An apparatus has been constructed that has 8 …
-
Mode I and Mode II Fracture Toughness of Montney Shale under Confining Pressure
… determining the crack stress thresholds. The Mode I fracture toughness under confining pressure was measured using SNDB samples with crack length to thickness ratios of about 0.2 and 0.4, respectively. The application of confining stress might induce tensile crack at the top of the SNDB sample …
-
Effects of Mode II on an Angled Crack in Unidirectional Carbon Fiber Composites
… crack path. In this study, the inclusion of the Mode II loading condition had a significant effect of the displacement fields. The inclusion of Mode II increased the agreement between predicted and experimental displacement fields around a crack tip. Regression analysis, crack growth rate …
-
Fracture Characteristics of Asphalt Concrete in Mode I, Mode II, and Mixed-Mode
… above were used to develop and validate a new Mode II test for asphalt concrete. No previous literature was found that attempted to capture Mode II fracture energy in asphalt concrete, so a test was developed from an extensive review of Mode II tests in the fields of metal, plastic, and PCC. …
-
Experimental Investigation of Mode II Fracture and Fatigue in Unidirectional Carbon/Epoxy Composite Beams
This paper investigates mode II quasi-brittle fracture and fatigue in laminated compositestructures and characterizes the phenomena in the form of size effect and Cohesive Zone Models (CZMs). This research focuses primarily on mode II quasi-static fracture, but also includes a preliminary …
-
Experimental Investigation of Mode II Fatigue and Size Effect in Unidirectional Carbon/Epoxy Composite Beams
This paper investigates mode II quasibrittle behavior and fatigue characteristics within laminated composite structures and examines these through the lens of size effect. The primary focus of this study is mode II quasi-static fatigue. Employing a closed-molding technique, composite beam specimens …
-
Experimental and Analytical Study of Mode II Interlaminar Failure of Bolted and Bonded Composite Structures
… of a fastener to arrest and stabilize pure Mode II interlaminar failure in composite structures has been investigated both experimentally and analytically. A novel pure Mode II three-beam axially loaded specimen was designed specifically for the study. Test specimens were manufactured with …
-
Mode I and mode II interlaminar fracture toughness simulation of unidirectional and quasi-three-dimensional composites
… by interlaminar fracture experiments under Mode I and Mode II conditions. This thesis is focused on numerical simulations of UD and Q3D composites under Mode I and Mode II loadings. This investigation is needed for the development of simulation methods for crash safety simulations of Q3D …
-
The effect of R-ratio on the mode II fatigue delamination growth of unidirectional carbon/epoxy composites
An investigation of the effect of R-ratio on the mode II fatigue delamination of AS4/3501-6 carbon/epoxy composites has been undertaken. Experiments have been performed on end notched cantilever beam specimens over a wide range of R-ratios (-l ≤R ≤0.50). The measured delamination growth rate data …
-
Finite element simulation and reliability assessment of mode-I and mode-II delamination testing of composite laminates
… tests are carried out using the Cohesive Zone Modeling (CZM) approach and the Finite Element Modelling and Analysis using the software ANSYS®. The results obtained are verified using relevant works in the literature. There are certain sources of uncertainty in the ply material properties, …
-
Effect of Clay Addition on Mode II Interlaminar Fracture Toughness and Flexural Fatigue Behavior of Glass/Epoxy Composites
… out to study the effect of clay addition on Mode II interlaminar fracture toughness and flexural fatigue behavior of glass/epoxy composites. Nanoclay was dispersed in epoxy resin by a high speed homogenizer. Then, hand lay-up and autoclave curing were used to fabricate S-glass/epoxy/nanoclay …
-
Experimentation of Mode I and Mode II Fracture of Uni-Directional Composites and Finite Element Analysis of Mode I Fracture Using Cohesive Contact
… One of the most prevalent and limiting mode of failure within composite laminates is delamination, since it not only reduces a structures stiffness and strength, but can be very difficult to detect without the use of special non-destructive equipment. Industry testing organizations have …
-
Study of composite joint strength with carbon nanotube reinforcement
… strength was investigated by performing Mode I, Mode II, and Mixed Mode I/Mode II fracture with and without carbon nanotubes applied locally at the joint interface. Furthermore, the effects of seawater absorption on Mode II fracture were investigated. Finally, an optimization of carbon …
-
Crack path determination for non-proportional mixed-mode fatigue
… under proportional and non-proportional mixed-mode fatigue and predict crack branching direction based on linear elastic fracture mechanics (LEFM) driving forces. Under proportional in-phase mixed Mode I / Mode II loading conditions, crack growth direction has previously been observed in some …
-
Micromechanics of void growth and coalescence - Vapor pressure induced failure in thin film and multilayer structures
… STRUCTURES: I) BIMATERIAL INTERFACE AND II) ADHESIVE JOINT. IT AIMS TO PROVIDE SOME INSIGHTS INTO THE MOISTURE-INDUCED FAILURE A?? A??POPCORNINGA?? IN IC PACKAGING. INCOMPATIBILITY IN MATERIAL PROPERTIES NATURALLY INDUCES A PREDOMINANTLY MODE II LOADING ON INTERFACES. WHEN VAPOR PRESSURE …
-
Investigation of the Effects of Geometry on the Efficiency of the Double Lap Joint of Unidirectional Fiberglass Composites
The fracture toughness in shear mode (Mode II) has been studied for double lap adhesive joints where geometry of the joint is the major parameter. A unidirectional fiberglass - epoxy system was selected for experimental tests and theoretical analysis. Both rectangular and elliptical planform …
Page 1 of 12