Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"Mode III"”.

  1. A photoelastic technique for the determination of stress intensity factors for Mode III loading

    … estimates of the stress intensity factors due to Mode III loadings from photoelastic data is developed. The results are supported by a series of stress freezing photoelastic experiments conducted on circumferentially notched round bars to which torsional loads were applied yielding a pure Mode III …

    vt Repository record for A photoelastic technique for the determination of stress intensity factors for Mode III loading (opens in a new tab)

  2. Characterization of Spot Weld Failure within Weld Groups under Predominantly Shear Loading

    … shear loading conditions. The experiments are modelled to evaluate how a calibrated weld failure model from single spot weld test data performs in predicting spot weld group response. Tensile lap shear and cross tension single spot weld experiments were conducted under quasi-static conditions, …

    waterloo Repository record for Characterization of Spot Weld Failure within Weld Groups under Predominantly Shear Loading (opens in a new tab)

  3. Validation of the ULSAP Closed-Form Method for Ultimate Strength Analysis of Cross-Stiffened Panels

    … and in all but 4 cases the predicted failure mode also agrees with that of ABAQUS. In one case the ULSAP predicted ultimate strength is 51% below the experimental value, and so this case is studied in detail. The discrepancy is found to be caused by the method which ULSAP uses for panels that …

    vt Repository record for Validation of the ULSAP Closed-Form Method for Ultimate Strength Analysis of Cross-Stiffened Panels (opens in a new tab)

  4. Solutions of some elastodynamic problems with application to crack propagation

    … to the solutions of two-dimensional problems of mode-I, mode-II, and mode-III cracks in homogeneous solids as well as to the solution of problem of the mode-III interface crack. The technique of self-similar with a new application of rotational superposition was used to solve dynamic problems of …

    uiuc Repository record for Solutions of some elastodynamic problems with application to crack propagation (opens in a new tab)

  5. Numerical Analysis of Stable Crack Growth in Elastic-Plastic Materials in Small Scale and General Yielding

    … along with the moving crack tip. Various models for plastic flow were used. In Mode III, calculations were carried out for J(,2) incremental theory and a modified J(,2) deformation theory meant to introduce effects related to flow at a yield surface vertex.

    uiuc Repository record for Numerical Analysis of Stable Crack Growth in Elastic-Plastic Materials in Small Scale and General Yielding (opens in a new tab)

  6. An exploration of tensile fracture in a nonhomogeneous elastic material

    The theoretical analysis of a mode I crack in functionally graded material is presented and the numerical values of the stresses and displacements are obtained for particular material parameters. Numerical results are obtained through inverse Mellin transforms. It was found that in most cases, the …

    ttu Repository record for An exploration of tensile fracture in a nonhomogeneous elastic material (opens in a new tab)

  7. Statistical estimation of strain energy release rate of delaminated composites

    An improved two-sublaminate model based on first-order shear deformation theory is implemented in a general-purpose finite element software (ANSYS) to study delaminated composite plates. Double cantilever beam and end-notched flexure models of unidirectional and multidirectional composite plates …

    wvu Repository record for Statistical estimation of strain energy release rate of delaminated composites (opens in a new tab)

  8. Organic solar cells in photo-electrochemical storage devices

    … in drei Integrationsmodi kombinieren: Mode I: Verdrahtete Verbindungen zwischen einzelnen Erzeugungs- und Speichergeräten. Mode II: Monolithische Integration von Erzeugungs- und Speicherkomponenten. Mode III: Verwendung multifunktionaler Materialien, die gleichzeitig Energie erfassen …

    freiburg-diss Repository record for Organic solar cells in photo-electrochemical storage devices (opens in a new tab)

  9. Failure analysis of stiffened and unstiffened mild steel plates subjected to blast loading

    … blast loads is investigated. The three failure modes identified in the literature, as the load intensity increases, are; mode I (large ductile deformation), mode II (tensile-tearing) and mode III (transverse shear). The prediction of failure for a large structure subjected to air blasts is a …

    ubc Repository record for Failure analysis of stiffened and unstiffened mild steel plates subjected to blast loading (opens in a new tab) Download PDF for Failure analysis of stiffened and unstiffened mild steel plates subjected to blast loading (opens in a new tab)

  10. A study of three-dimensional cracks

    … with experimental characterization of mixedmode cracks in PMMA. The objective of this study is to identify a criterion for crack growth initiation under truly three-dimensional mixed-mode conditions. Based on macroscopic measurements and microscopic observations, it is proposed that the Mode …

    texas Repository record for A study of three-dimensional cracks (opens in a new tab)

  11. Development of Novel Techniques to Characterize the Traction-Separation Responses of Delamination in Fibre-Reinforced Plastic Laminates

    … in load-bearing structures requires accurate modelling of progressive damage under mechanical loading, including interlaminar delamination. Current experimental techniques cannot fully parameterize numerical techniques such as cohesive zone modelling (CZM), which represents the delamination …

    waterloo Repository record for Development of Novel Techniques to Characterize the Traction-Separation Responses of Delamination in Fibre-Reinforced Plastic Laminates (opens in a new tab)

  12. Environmental effects on the fatigue behavior of copper nickel alloys

    Mode I and Mode III fatigue tests were performed on copper nickel alloys in helium, salt water environments. The hydrogen, oxygen, two alloys used air and in this investigation were 90-10 and 70-30 copper nickel. Both alloys contained iron which was added to improve the erosion corrosion …

    vt Repository record for Environmental effects on the fatigue behavior of copper nickel alloys (opens in a new tab)

  13. An Eulerian-Lagrangian finite element method for modeling crack growth in creeping materials

    … Eulerian-Lagrangian description (ELD) kinematic model is shown to have several desirable properties for modeling inelastic crack growth. Accordingly, a variational statement based on the ELD for history-dependent materials is developed and a new moving-grid finite element method based on the …

    uiuc Repository record for An Eulerian-Lagrangian finite element method for modeling crack growth in creeping materials (opens in a new tab)

  14. Φλεξοηλεκτρισμός στην αντι-επίπεδη δυναμική μηχανική των θραύσεων

    … displacement and the polarization are studied. Mode III steady state fracture, where the mechanical and the electrical fields remain invariant in respect to an observer moving with the crack-tip, is studied. Mode III steady state McClintock – Sukhatme problem, is the first fracture problem, …

    greece Repository record for Φλεξοηλεκτρισμός στην αντι-επίπεδη δυναμική μηχανική των θραύσεων (opens in a new tab)

  15. Mixed mode I-II-III fracture criterion and its application to cement mortar

    … and slightly ductile materials under pure mode III loading, the closure analysis of an infinitesimal crack extension has been carried out, and relationship between the stress intensity factor and energy release rate established. On the basis of the unified model, which specifies the …

    nus Repository record for Mixed mode I-II-III fracture criterion and its application to cement mortar (opens in a new tab) Download file for Mixed mode I-II-III fracture criterion and its application to cement mortar (opens in a new tab)

  16. If women write in milk, do children write in snot? Children's voices in documented drama

    … methods used by the now extinct Leicestershire Mode III syllabus grow in significance. The problem of assessing the ephemeral felt experience of the drama student was accepted as an opportunity to theorise rather than sanitise through standardisation.<br/><br/>The study concludes by suggesting …

    northampton Repository record for If women write in milk, do children write in snot? Children's voices in documented drama (opens in a new tab) Download PDF for If women write in milk, do children write in snot? Children's voices in documented drama (opens in a new tab)

  17. Προβλήματα εξαρμώσεων και ρωγμών στα πλαίσια γενικευμένων θεωριών συνεχούς μέσου

    … applied plane and antiplane strain loadings (mode I, mode II and mode III cases). The mode I crack is modeled by a continuous distribution of jump dislocations and wedge disclinations, whereas the mode II and mode III cracks are modeled by a continuous distribution of glide and screw …

    greece Repository record for Προβλήματα εξαρμώσεων και ρωγμών στα πλαίσια γενικευμένων θεωριών συνεχούς μέσου (opens in a new tab)

  18. Analysis of the deformation and failure of blast loaded unstiffened and striffened plates

    … under blast loading exhibit the three general modes of failure: mode I (large inelastic deformation), mode II (tensile tearing and deformation) and mode III (shear rupture). The failure analysis of plate structures subjected to blast loading is still considered a difficult task. These problems …

    ubc Repository record for Analysis of the deformation and failure of blast loaded unstiffened and striffened plates (opens in a new tab) Download PDF for Analysis of the deformation and failure of blast loaded unstiffened and striffened plates (opens in a new tab)

  19. Dynamic Mixed-Mode Fracture of Bonded Composite Joints for Automotive Crashworthiness

    An experimental evaluation of the mixed-mode fracture behavior of bonded composite joints is presented. Commonly used experimental techniques for characterizing the mode I, mixed-mode I/II, mode II, and mode III fracture behavior have been employed for the purpose of developing a fracture envelope …

    vt Repository record for Dynamic Mixed-Mode Fracture of Bonded Composite Joints for Automotive Crashworthiness (opens in a new tab)

Page 1 of 3