Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 674 for “"Mode Shapes"”.
-
Structural Damage Detection Utilizing Experimental Mode Shapes
… through analysis of experimentally measured mode shapes?” The work encompasses construction of a test structure, with three braces that can be repeatedly engaged or dis-engaged, thus allowing for testing of a variety of braced configurations. For this thesis, damage is assumed to cause a …
-
Structural Damage Detection by Comparison of Experimental and Theoretical Mode Shapes
… are determined through FVT. A suite of computer models with different levels of damage are then developed. A quantitative analysis procedure compares experimental results to the computer models. Models that show high levels of correlation to experimental brace configurations identify the extent …
-
Design and modeling of a sonochemical reactor using geometry, mode shapes and resonance
… process, maximize its sound field using mode shapes and resonance and, with the addition of a tracking system, follow system resonances that change with cavitation. The cylindrical reactor cavity and co-axial cylindrical transducer used in the design focus sound energy at the centre of …
-
Natural frequencies and an atlas of mode shapes for generally-laminated, thick, skew, trapezoidal plates
… and rotary inertia is also included.in the model. Convergence of the solution resulting from changes in spring values and number of terms in the series is investigated. The accuracy of the method is demonstrated by comparing the present method to available results for plates of various …
-
Computation of free vibration frequencies and mode shapes of cantilever plates with finite discontinuities in properties moving outward from the clamped edge.
… solutions for free vibration frequencies and mode shapes. Chapter 1 introduces the reader to the theory of rectangular plates while chapter 2 concentrates on introducing the general solutions as applied to rectangular plates. Although there is no limit to the number of plate spans to be …
-
An automated damage detection system for Armoured Vehicle Launched Bridge.
… system utilizes the method of strain energy mode shapes as the core damage detection method. The presented research covers both practical design issues and new theoretical developments in the area of non-destructive damage detection using strain energy mode shapes. The dissertation presents a …
-
A case study for building an automated damage detection system.
… research had shown that use of strain energy mode shapes allows identifying and locating damage. A highly qualified expert is required in order to analyze acquired mode shapes and recognize damage locations. This research investigates several aspects of building an automated damage detection …
-
Active damping of vibration in large space structures using a Karhunen-Loeve reduced order model
… because of the high order of their mathematical models. The high order mathematical model makes the use of a reduced order model to control the structure desirable. The Karhunen-Loeve expansion along with Galerkin's method is used to generate a reduced order model. A control algorithm is achieved …
-
Using nonlinear sensitivities to estimate eigenvalues and eigenvectors for large design changes
<p>Determining the natural frequencies and mode shapes is an important step in the design of physical systems. Typically for large systems, a model is prepared using a finite-element preprocessor, an eigenvalue problem is formed, and an eigenvalue solver is used to obtain the natural frequencies …
-
Identification of Physical Changes to a Steel Frame
The thesis utilized physical testing and computer modeling to determine the feasibility of identifying a change to the mass or stiffness of a steel frame. Physical testing was performed using an accelerometer, linear shaker, and arbitrary function generator. Two methods of laboratory testing were …
-
Simultaneous measurement of full-field vibration modes using Electronic Speckle Pattern Interferometry (ESPI)
The natural frequencies and vibration mode shapes of flat plates are measured using ESPI, even when multiple modes are simultaneously present. The method involves measuring the surface shape of a vibrating plate at high frame rate using a Michelson interferometer and high-speed camera. The …
-
Finite Element Modeling and Active Control of an Inflated Torus Using Piezoelectric Devices
… finite element package, ANSYS, is used to model the inflated torus. The effect of torus aspect ratio and inflation pressure on the vibratory response of the structure is investigated. The interaction with the torus of the surface-mounted piezoelectric patches, made of PVDF, is modeled using …
-
Identification of offshore wind turbine foundation properties from monitoring data
… stiffness of an OWT is presented using a model updating approach applied to simulated data. The results are shown to accurately replicate the behaviour of the true foundation. For the identification of a coupled springs macro-element foundation model, the compliance terms are found to be …
-
MOBILITY ANALYSIS AND TOPOLOGY SYNTHESIS OF COMPLIANT MECHANISM USING COMPLIANCE NUMBER AND PSEUDO-RIGID-BODY MODEL (PRBM)
… number (C) and stored strain energy, or mode shapes, are strongly correlated. This compliance number (C) concept is revisited, and a more lucid interpretation of its significance is provided. A fundamental understanding of the concept of deformation mode shapes in compliant mechanisms is …
-
An experimental and finite element investigation of added mass effects on ship structures
… three phases : 1) investigation of the fluid modelling capabilities of the Finite Element Program VAST, 2) experimental investigation to determine the effect of the fluid on the lowest natural frequencies and mode shapes of a ship model, and 3) comparison of these experimental results with …
-
Passive vibration control using viscoelastic and constrained layer beam waveguide absorbers
… theoretically predicted the test structure's mode shapes and modal strain energies. An experimental modal survey was conducted to compare with the theoretically predicted mode shapes and natural frequencies. The mode shapes and modal strain energies determined the optimum locations of the …
-
Analysis of Heat Transfer on Turbulence Generating Ribs using Dynamic Mode Decomposition
… recent modal extraction technique called Dynamic Mode Decomposition (DMD) to determine mode shapes of the spatially and temporally complex flowfield inside a ribbed duct. One subject missing from current literature is a method of directly linking a mode to a certain engineering quantity of …
Page 1 of 34