Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 71 for “"Mode area"”.
-
Bending losses in large mode area holey fibres
… potential offered by holey fibres in the large-mode-area, single-mode regime, and to place their performance in context against conventional step-index fibres. In the study presented here, numerical and experimental techniques have been developed that are capable of accurately evaluating the …
-
Power Scaling Of Large Mode Area Thulium Fiber Lasers In Various Spectral And Temporal Regimes
… to the experimental results, theoretical modeling of thulium fiber amplifier operation, simple thermal management analysis, as well as practical fiber and system design considerations for future power scaling are presented. Experimental and theoretical results of this work will enable the …
-
Advanced Specialty Fiber Designs for High Power Fiber Lasers
… factors, namely nonlinear effects and transverse mode instability, prohibiting the power scaling capability of fiber lasers. The nonlinear effects, originating from high optical intensity, primarily limit the peak power scaling. The mode instability, on the other hand, arises from quantum-defect …
-
Measuring photodarkening from Yb doped fibers
… benchmarking and spectral studies on single-mode fibers was developed, and a similar alternative method was developed for large-mode-area fibers. Both approaches were studied experimentally and by simulations. Additionally, an experimental setup was built to study the spatial photodarkening …
-
Subwavelength Engineering of Silicon Photonic Waveguides
… structures or avenues: (i) a novel ultra-low mode area v-groove waveguide to enhance light-matter interaction; and (ii) a nanoscale sidewall crystalline grating performed as physical unclonable function to achieve hardware and information security. With the advancement of modern technology and …
-
Applications Of Volume Holographic Elements In High Power Fiber Lasers
… Output powers can be further scaled using large mode area fibers, however, at the cost of beam quality and instabilities due to the presence of higher order modes. The mechanisms limiting the performance of narrow-linewidth large mode area fiber lasers are investigated and solutions using …
-
New quantitative phase imaging modalities on standard microscope platforms
… of these new methods were evaluated using modelling and simulation as well as experimentation with known test cases. In addition to the development of new methods, existing methods for quantitative phase imaging were applied to characterize the effects of manufacturing, cleaving, and fusion …
-
Investigation of supercontinuum generation in photonic crystal fibers with different characteristics /
… like tight light confinement, low effective mode area (increment of nonlinearity coefficient), flexibility to choose pump wavelength [2,6,7]. As nonlinear response is sufficiently increased by decreasing effective mode area, tapered photonic crystal fibers were invented and implemented …
-
Optical Fiber Devices: Novel Fiber Lasers and Image Amplifier
… all phosphate glass fiber laser, single hybrid mode fiber laser, and fiber image amplifier, were investigated in this dissertation. Phosphate fiber Bragg grating (FBG) is desired to improve performance of recently developed high power single frequency lasers that were based on highly rare earth …
-
Novel optical fibers for high power lasers
… however large core diameter leads to multimode behavior and is prone to bend-induced effective area reduction. <br/><br/>Several novel large mode area fibers have been proposed to scale the output power level. However, the advantages of all-fiberized device and low cost disappear as most of …
-
Fiber based ultrafast laser sources for multiphoton imaging
… uses cascaded soliton propagation in the LP02 mode of two higher order mode fibers to produce 3.5 nJ, 55 fs pulses at 1175 nm. The second design uses a high power, tunable repetition rate fiber chirped pulse amplification system at 1550 nm to generate energetic solitons in a photonic crystal …
-
On-Chip Photonic Circuits for Atom-Light Interaction in Quantum Information and Integrated Optical Spectrometer for Astrophotonics
… and enhancing the interaction by using a small mode area has also been demonstrated in several platforms such as a hollow-core fiber, a hollow-core waveguide, a tapered fiber, and a nanowaveguide. In our work, we propose a nanowaveguide platform for collective atom-light interaction through the …
-
Novel sensor and telecommunication applications of photonic crystal fibers
… attracted great interest in many research areas such as in nonlinear optics and measurement science as their manufacturing process allows for a high flexibility in the fiber design. Index-guiding photonic crystal fibers are commonly referred to as microstructured fibers whereas hollow-core …
-
Microstructured tellurite glass fibre laser development.
… tellurite fibres which included large mode area fibres, motivated by the desire to fabricate a double clad fibre and the development of small core fibres which were used in the fibre laser experiments (Chapter 3). A spectroscopic study of the erbium III doped glass including lifetimes, …
-
Novel Parametric Processes For Quantum Information Processing Using Rubidium Vapor Based Photonic Platforms
… interacting with a tightly confined optical mode area, such as that of a waveguide. The guiding properties of the waveguide over long distances helps in achieving a long interaction length while simultaneously increasing the atom-photon coupling by maintaining a small mode area over the …
-
Picosecond Yb-Doped Fiber Amplifier
… research is to study the YDFA by developing a model and building a YDFA setup in free space configuration. The active fiber used in the setup is a few modes, polarization-maintaining double-cladding ytterbium-doped large mode area (LMA) fiber and the length is 1m. The pump used is a tunable …
-
Optical waveguide design using inverse transmission line techniques
… per fibre. Critical fiber properties such as mode field profiles, single-mode propagation conditions and dispersion characteristics can all be related to the optical fiber refractive index profiles. For this reason, it is of fundamental importance to be able to design optical fiber refractive …
-
Two-Colour Nonlinear Amplification for Mid-infrared Generation by Difference Frequency Generation
… results being achieved with the use of a large-mode- area Yb:fiber. We demonstrate a two-colour laser source with colours centered at 1070 nm and 1120 nm with individual bandwidths of 30 nm and 21 nm respectively. This two-colour spectrum was amplified up to a total power of 6.76 W, with a …
-
Design And Implementation Of a High-Power Fiber Amplifier For Diamond Raman Laser Pump
… and final amplifier stage uses an extra large mode area(XLMA) fiber for decreasing irradiance of the signal with in the fiber and thus mitigating the unwanted nonlinear effects at the output when the system will be pulsed. Engineering designs will be presented for fiberized components that …
-
Photonic Devices using Coupled Plasmonic Structures
… photonic integrated circuits. Although coupled-mode plasmonic structures can help alleviate the trade-off, stringent symmetry requirements limit the fabrication tolerance and the optical functionalities that can be supported. In this dissertation, a coupled hybrid plasmonic waveguide (CHPW) …
Page 1 of 4