Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Mode superposition"”.

  1. Exact Solution of Time History Response for Dynamic Systems with Coupled Damping using Complex Mode Superposition

    … rules are more accurate. Using a simple model representing a stiff system with general damping, a two-step modal analysis using real-valued modal reduction followed by state-space modal analysis is shown to be an effective approach for rejecting spurious modes in the spatial …

    clemson Repository record for Exact Solution of Time History Response for Dynamic Systems with Coupled Damping using Complex Mode Superposition (opens in a new tab)

  2. Análise estática não-linear geométrica de estruturas pelo método de superposição modal com base Lanczos-Ritz

    … work is to present the method of linear buckling mode superposition as a procedure for geometric nonlinear static analysis of slender structures, and to examine, as an alternative to a modal basis, the use of a coordinates transformation constitutes by vectors produced in a non-iterative way from …

    brazil-uerj Repository record for Análise estática não-linear geométrica de estruturas pelo método de superposição modal com base Lanczos-Ritz (opens in a new tab)

  3. Estudo sobre a qualidade da resposta dinâmica do Método de Superposição dos Modos de Lanczos

    … about a dynamic response quality for Lanczos Mode Superposition Method for structures submitted to large range of excitation periods is carried out. The unbalanced equation of motion, or residual, was evaluated from global parameters to address the response quality of a modal superposition …

    brazil-uerj Repository record for Estudo sobre a qualidade da resposta dinâmica do Método de Superposição dos Modos de Lanczos (opens in a new tab)

  4. A Study of Shock Analysis Using the Finite Element Method Verified with Euler-Bernoulli Beam Theory; Mechanical Effects Due to Pulse Width Variation of Shock Inputs; and Evaluation of Shock Response of a Mixed Flow Fan

    … it is very important to know how to properly model and obtain accurate solutions for complicated loading conditions such as shock loading. Transient acceleration loads, such as shocks, are not as common as static loads. Analyzing these types of problems is less understood, which is the basis …

    calpoly Repository record for A Study of Shock Analysis Using the Finite Element Method Verified with Euler-Bernoulli Beam Theory; Mechanical Effects Due to Pulse Width Variation of Shock Inputs; and Evaluation of Shock Response of a Mixed Flow Fan (opens in a new tab)

  5. Implementation of automated multilevel substructuring for frequency response analysis of structures

    … is a growing emphasis on analysis of computer models. In this dissertation, a method known as Automated Multilevel Substructuring (AMLS) is presented for accurately solving frequency response problems involving large, complex models with millions of degrees of freedom. Conventional methods for …

    texas Repository record for Implementation of automated multilevel substructuring for frequency response analysis of structures (opens in a new tab) Restricted access

  6. Integração direta da resposta em regime permanente pelo Método de Ritz-Wilson com mudança de base

    … to a single cycle of the excitation. The superposition of Ritz-Wilson vectors is used for the transient response solution. Basis change approaches are also presented to allow the application of the Ritz-Wilson method in the solution of dynamic response due to generic load cases. The final …

    brazil-uerj Repository record for Integração direta da resposta em regime permanente pelo Método de Ritz-Wilson com mudança de base (opens in a new tab)

  7. Nonlinear stochastic drilling vibrations

    … this dissertation discusses a novel technique to model drilling vibratory excitation mechanisms using digital filters, presents an error estimator for the mode superposition method, introduces drilling fundamentals and includes an extensive literature review on drilling vibrations and related …

    rice Repository record for Nonlinear stochastic drilling vibrations (opens in a new tab)

  8. Analyzing Skid Resistance and Tire/Road Noise on Porous Pavement Using Numerical Modeling

    … attempts to explore the development of numerical models in predicting skid resistance and tire/road noise on porous pavements. The drainage capacity of a porous surface is modeled by a simplified pore structure. This porous pavement model is then integrated into the numerical skid resistance …

    nus Repository record for Analyzing Skid Resistance and Tire/Road Noise on Porous Pavement Using Numerical Modeling (opens in a new tab) Download file for Analyzing Skid Resistance and Tire/Road Noise on Porous Pavement Using Numerical Modeling (opens in a new tab)

  9. Simulation Methodologies for Satellite Solar Array Dynamics

    … analysis provides the natural frequencies and mode shapes which are the intrinsic dynamic properties of the structure. Transient analysis is used for evaluating the mechanical behavior of the structure. It gives relations between the intrinsic properties of structure and the external …

    tamu Repository record for Simulation Methodologies for Satellite Solar Array Dynamics (opens in a new tab)

  10. Dynamic performance of heavy vehicles using finite element method

    In this study, a finite element model of a typical highway bus is developed with ANSYS, and is used to demonstrate its effectiveness in evaluating its dynamic performance in ride, handling and longitudinal modes. The number of degrees of freedom (DOF) of the developed highway bus model is 1848, and …

    concordia Download PDF for Dynamic performance of heavy vehicles using finite element method (opens in a new tab)

  11. Seismic Response of Pipeline Systems in a Soil Liquefaction Environment

    … finite element method has been developed. The mode superposition method is used to solve the equation of motion of the pipeline. The required eigenvalues and eigenvectors are calculated by subspace iterations. A few uncoupled modal equations of motion are solved by a step-by-step numerical …

    odu Repository record for Seismic Response of Pipeline Systems in a Soil Liquefaction Environment (opens in a new tab)

  12. Επιρροή της παραμορφωσιμότητας των πλακών στη στατιστική και δυναμική συμπεριφορά πολυόρορφων κτιρίων

    … DYNAMIC SOLUTION OF THE STRUCTURES CONSIDERED A MODE SUPERPOSITION ANALYSIS WAS CARRIED OUT. THE RESPONSE SPECTRUM USED WAS THE ONE OF WHICH THE EUROCODE NO 8 PROPOSES.

    greece Repository record for Επιρροή της παραμορφωσιμότητας των πλακών στη στατιστική και δυναμική συμπεριφορά πολυόρορφων κτιρίων (opens in a new tab)

  13. Component mode synthesis for ship structures : investigation into an alternative approach

    … For that purpose state of the art structural modelling techniques are reviewed for the validity of their basic principles, accuracy, practicality and required computation time when applied on typical marine structures. Full finite element modelling has been applied on a part of the structure …

    strathclyde Repository record for Component mode synthesis for ship structures : investigation into an alternative approach (opens in a new tab)

  14. Methods for evaluating allowable vibration velocity levels in power plant piping systems

    … synthesis and synthesis on three computational models with different levels of complexity. Modal analysis was performed by mode superposition which is an effective method used to approximate the dynamic response of a structure by superposition a small number of the structures eigenmodes. The …

    chalmers Repository record for Methods for evaluating allowable vibration velocity levels in power plant piping systems (opens in a new tab)

  15. Exploring multiple-mode vibrations of capacitive micromachined ultrasonic transducers (CMUTs)

    … explores the complex behavior of CMUTs from a mode superposition perspective, and demonstrates imaging applications using CMUTs' multi-modal operation. The operation of CMUTs is first analytically modeled as a coupled electro-mechano-acoustical system using plate vibration theory. As the …

    ubc Repository record for Exploring multiple-mode vibrations of capacitive micromachined ultrasonic transducers (CMUTs) (opens in a new tab) Download PDF for Exploring multiple-mode vibrations of capacitive micromachined ultrasonic transducers (CMUTs) (opens in a new tab)

  16. Impact loading of timber beams

    … beams. The investigation was focused on failure modes and failure stresses. The static tests were conducted using both deformation and load controlled regimes at three different loading rates in a MTS test machine. The single blow impact tests were carried out with three different drop-heights …

    ubc Repository record for Impact loading of timber beams (opens in a new tab) Download PDF for Impact loading of timber beams (opens in a new tab)

  17. From medical images to individualized cardiac mechanics: A Physiome approach

    … achieved through coupling general physiological models derived from invasive experiments with subject-specific information extracted from medical images. Nevertheless, as data extracted from images are gross, sparse, or noisy, and do not directly provide the information of interest in general, …

    rit Repository record for From medical images to individualized cardiac mechanics: A Physiome approach (opens in a new tab)

  18. Υδροελαστική ανάλυση και βελτιστοποίηση εύκαμπτων πλωτών κατασκευών για προστασία και παραγωγή κυματικής ενέργειας

    … a multi objective optimization mathematical model of a Floating Flexible Structure (FFS) subjected both to regular and irregular incident waves is developed and presented. FFS is considered as an effective system for both wave energy production with the utilization of a linear hydraulic Power …

    greece Repository record for Υδροελαστική ανάλυση και βελτιστοποίηση εύκαμπτων πλωτών κατασκευών για προστασία και παραγωγή κυματικής ενέργειας (opens in a new tab)

  19. Modelling of excitation and response induced by impact : an investigation for slamming of mono- and multi-hulled vessels

    … excitation, since this is the basis for modelling the excitation and response induced by slamming. Results are produced and compared both using theoretically established convolution method and ANSYS (transient analysis with full and mode superposition methods). Realistic stiffened plates …

    soton Download PDF for Modelling of excitation and response induced by impact : an investigation for slamming of mono- and multi-hulled vessels (opens in a new tab)

Page 1 of 2