Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Model reference control"”.
-
Model reference control for grid forming inverters
… (GFL) inverters. This paper proposes a novel model reference-control framework for grid-forming inverters where the control is designed so that the overall system acts as traditional synchronous generation system would act. The paper proposes an imitation-based learning algorithm to emulate …
-
Input-shaped model reference control for flexible systems
… This thesis investigates a simple and robust control method that improves the operation of flexible systems, even in the absence of an accurate system model and sensing. The goal is achieved via the combination of input shaping and model reference control (MRC). The input-shaped model …
-
Model reference control for ultra-high precision positioning systems
… and MEMS/NEMS in the past decades, control of ultra-high precision positioning using piezoelectricity has become an important area because of its high displacement resolution, wide bandwidth, low power consumption, and potential low cost. However, the relatively small displacement …
-
Nonlinear modeling and h-infinity model reference control of pneumatic suspension system
… The work presented in this thesis addresses modeling, analysis and control of the pneumatic suspension system. First, the static and dynamic characteristics of a generic pneumatic suspension system are studied, followed by the development of a nonlinear model of the pneumatic suspension …
-
Automated longitudinal payload lift-up using bridge cranes
… payload and bridge, human operator error, and uncontrollable system oscillation. In this thesis, the automated lift-up of longitudinal payloads using bridge cranes is proposed. The problems specific to each stage of this process are studied and solutions are developed. A side-swing trajectory is …
-
A method for the identification of parameters in nonlinear time-varying discrete systems
… systems.</p><p>The method is based on the model-reference control system where the model and the plant are controlled to exhibit the same output trajectory. The model is chosen to be linear and stationary. To develop the procedure of identification we assume that the structure of the …
-
Preliminary design and cycle verification of a digital autopilot for Autonomous Underwater Vehicles/
… has now built the first of a series of AUV models which will be used as "test-beds" for evolving automated control technologies. This thesis documents the results of initial efforts to install an on-site facility to support the design and development of a model-based digital autopilot for …
-
Nonlinear oscillation and control in the BZ chemical reaction.
In this thesis, a reversible Lotka-Volterra model was proposed to study the nonlinear oscillation of the Belousov-Zhabotinsky(BZ) reaction in a closed isothermal chemical system. The reaction zone can be divided into two zones, oscillation zone and transition zone, where the oscillation time and …
-
Multivariable Adaptive Control
This thesis treats the problem of direct adaptive control of linear multivariable systems. The parametrization problem of adaptive control is discussed extensively. A pole-placement problem and a model-matching problem are formulated and interpreted in terms of model reference control. The problem …
-
Motor simulation of a shock absorber
The use of modern control theory to produce an electrical motor simulation of a Formula 1, Grand Pnx, passive motorcycle front suspension shock absorber is investigated. It is shown, using a test-rig comprising two permanent magnet DC motors directly coupled, that desired shock absorber responses …
-
Identification and control of non-linear time-varying dynamical systems using artificial neural networks
Identification and control of non-linear dynamical systems is a very complex task which requires new methods of approaching. This research addresses the problem of emulation and control via the use of distributed parallel processing, namely artificial neural networks. Four models for describing …
-
Control of a hydraulically actuated mechanism using a proportional valve and a linearizing feedforward controller
… hydraulics is the desire to automate motion control functions in a restricted-cost and restricted-sensor environment. In this thesis a solution to this problem is presented. A velocity control scheme based on a novel single component pressure compensated ow controller was developed and …
-
Comparison of System Identification Techniques for the Dexterous Orbital Servicing System (DOSS)
… identification is the development of analytical models of a system. Many identification techniques can adequately describe the input and output map. One of the challenges of these techniques is to correctly infer from the measured data the characteristics of the individual, contributing …
-
A design procedure for model reference adaptive control
… study, we assess the robustness of four distinct control approaches: pole placement; the command generator tracker (CGT) approach to model reference control; model reference adaptive control (MRAC); and MRAC using a fixed feedback gain. We use a second order, single-input single-output (SISO) …
-
A Clean Slate Control Framework for Future Distribution Systems
… of a smart distribution system. Accordingly, the control and operation can be simplified significantly with the system configured as an interconnected of coupling operated microgrids. By leveraging the highly controllable power electronics (PE) interfaces - voltage source inverters (VSIs), and …
-
Adaptive control using variable structure systems.
Adaptive control is employed in control systems required to operate satisfactorily regardless of parameter variations, external disturbances and changes in the environment. A conceptually simple approach to adaptive control is the model reference approach which yields a nonlinear feedback system. …
-
Design Of An Adaptive Autopilot For An Expendable Launch Vehicle
This study investigates the use of a Model Reference Adaptive Control (MRAC) direct approach to solve the attitude control problem of an Expendable Launch Vehicle (ELV) during its boost phase of flight. The adaptive autopilot design is based on Lyapunov Stability Theory and provides a useful means …
-
Especificação do modelo de referência em projeto de controladores multivariáveis discretos
A escolha do modelo de referência é a principal tarefa a ser executada pelo projetista em um projeto de controle por modelo de referência. Uma má escolha do modelo de referência pode resultar em um desempenho de malha fechada que tem pouca semelhança com o especificado e a malha fechada pode até …
-
A microprocessor based simulator/trainer for a dry process control laboratory
… specifically for use in a university process control laboratory. Also presented are a number of application examples that illustrate uses of the device as a teaching/learning tool in undergraduate courses. The examples are intended to illustrate ways in which the simulator can be used to aid …
-
A Hybrid Controller for Stability Robustness, Performance Robustness, and Disturbance Attenuation of a Maglev System
… tables. Maglev systems rely on feedback controllers to maintain stable levitation. Designing such feedback controllers is challenging since mathematically the electromagnetic force is nonlinear and there is no local minimum point on the levitating force function. As a result, maglev …
Page 1 of 2