Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 152 for “"Modes of failure"”.

  1. Mixed Weibull distributions in reliability engineering: Statistical models for the lifetime of units with multiple modes of failure.

    … distribution in modeling the lifetime of the units having more than one possible failure cause. Due to the lack of a systematic statistical procedure of fitting the distribution to a data set, it has not been widely used in lifetime data analyses. Many areas on this subject have been …

    arizona-thes Repository record for Mixed Weibull distributions in reliability engineering: Statistical models for the lifetime of units with multiple modes of failure. (opens in a new tab)

  2. A Structural Design Classification of Pavements Based on an Analysis of Pavement Behavior, Material Properties, and Modes of Failure

    … in DSpace on 2014-12-08T23:56:20Z (GMT). No. of bitstreams: 1 6507072.pdf: 7607486 bytes, checksum: a660b9fbebf7065884fbf2cea259a0ed (MD5) Previous issue date: 1965

    uiuc Repository record for A Structural Design Classification of Pavements Based on an Analysis of Pavement Behavior, Material Properties, and Modes of Failure (opens in a new tab)

  3. Un-building blocks: a model of reverse engineering and applicable heuristics

    … part, and attempts—through systematic analysis of its physical characteristics and other available evidence—to answer one or more of the following questions: What is this for? What does it do? How does it do it? What is inside it? How was it made? A model developed from a synthesis of the …

    nps Repository record for Un-building blocks: a model of reverse engineering and applicable heuristics (opens in a new tab)

  4. Experimental Methods for Understanding the Performance of Impulsively Loaded Cross-Laminated Timber Panels

    … for application in the force protection of structures. This research bridges the gap between the quasi-static and high strain rate loading regimes by investigating two areas that have remained unstudied or elusive, i.e., rolling shear failure of CLT under impulsive, blast-like loading and …

    gatech Repository record for Experimental Methods for Understanding the Performance of Impulsively Loaded Cross-Laminated Timber Panels (opens in a new tab)

  5. Investigation and Prediction of the Shear Strength of Concrete Beams

    In the design of reinforced concrete structures adequate factors of safety should be provided against all modes of failure that might occur under the forces that act on the structure during its existence. One general type of failure which should be prevented is "shear failure." This type of failure …

    marquette Repository record for Investigation and Prediction of the Shear Strength of Concrete Beams (opens in a new tab)

  6. Failure surface of a square and rectangular reinforced concrete members [sic] under combined biaxial bending and tension

    <p>This thesis describes the development and use of three dimensional strength interaction diagrams of reinforced concrete sections for different loading conditions. It also gives a comprehensive overview of modes of failure surfaces and provides design aids for members subjected to biaxial bending …

    njit Repository record for Failure surface of a square and rectangular reinforced concrete members [sic] under combined biaxial bending and tension (opens in a new tab)

  7. Failure mechanisms of hermetically sealed solid tantalum capacitors

    <p>This study has determined the failure mechanisms of solid tantalum capacitors and their causes. It was observed that high leakage current and electric shorts are the most prominant modes of failure. The experimental data has proved that humidity and high temperature are the factors which promote …

    njit Repository record for Failure mechanisms of hermetically sealed solid tantalum capacitors (opens in a new tab)

  8. Reliability Analysis of Braced Excavations

    … been developed for evaluating the probability of failure of braced excavations through three critical modes of failure, namely buckling of struts, heaving of the base, and excessive settlement of the adjoining ground. The method was applied to braced excavations in medium to soft clays (mainly …

    uiuc Repository record for Reliability Analysis of Braced Excavations (opens in a new tab)

  9. Relationship between Short-Term and Long-Term Creep, and the Molecular Structure of Polyethylene

    … property perspective, in which the response of the material to loads is the topic; a micromechanical point of view, in which the macroscopic state of the material is related to its microstructure, e.g., Alvarado (2007), and a chemical point of view in which the molecular structure and the …

    waterloo Repository record for Relationship between Short-Term and Long-Term Creep, and the Molecular Structure of Polyethylene (opens in a new tab)

  10. Predicting the extent of rock failure/loosening above underground excavations in massive and jointed rock

    … into the geomechanical response and deformation of two kinds of rock materials, massive and jointed rocks to excavation. Two finite element programs Phase2 and InSight2D were used to study the development of the failure/damage zones above an underground opening in massive rock. The results of …

    manitoba Repository record for Predicting the extent of rock failure/loosening above underground excavations in massive and jointed rock (opens in a new tab)

  11. Development and Testing of Manufacturing Methods for a Piezoelectric Composite Stacked Generator to Improve the Success Rate of Interbody Spinal Fusion

    … growth in spinal fusion surgeries. The objective of this study is to examine a method of manufacturing using conductive adhesive copper tape and compare to an alternative method using silver epoxy. Furthermore, this work investigates potential modes of failure and the ability of the specimen to …

    ku Repository record for Development and Testing of Manufacturing Methods for a Piezoelectric Composite Stacked Generator to Improve the Success Rate of Interbody Spinal Fusion (opens in a new tab)

  12. Διάσωση του κάτω άκρου σε ασθενείς με όγκους του εγγύς μηριαίου οστού με χρήση μεγαπρόθεσης

    Background: Reconstruction of extensive bone loss in the hip region with a proximal femoral megaprosthesis is an established surgical technique. Despite its usefulness in limb salvage, it remains associated with high complication rates, increased morbidity, and mortality. The aim of this study was …

    greece Repository record for Διάσωση του κάτω άκρου σε ασθενείς με όγκους του εγγύς μηριαίου οστού με χρήση μεγαπρόθεσης (opens in a new tab)

  13. Finite element modelling of shear connection for steel-concrete composite girders

    The main objective of this thesis is to develop effective 3-dimensional finite element models to trace the behaviour of headed stud shear connectors in composite girders with solid slabs and precast hollow core slabs. The finite element package ABAQUS was used to conduct the analysis. Push-off …

    whiterose Download PDF for Finite element modelling of shear connection for steel-concrete composite girders (opens in a new tab)

  14. Comparison between the fracture strength and failure mode of lithium disilicate, zirconia and titanium implant abutments

    … (FairTwo, FairImplant, Germany) having a length of 11.5 mm and a diameter of 4.5 mm were used to be restored with single lithium disilicate crowns (IPS emax CAD, Ivoclar Vivadent, Liechtenstein). Five types of abutments were used; Ti titanium (CopraTi-4, Whitepeaks, Germany), Zr zirconia (Wieland …

    cau-kiel Repository record for Comparison between the fracture strength and failure mode of lithium disilicate, zirconia and titanium implant abutments (opens in a new tab)

  15. Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading

    The purpose of this study was to investigate the hysteretic response of reinforced-concrete (R/C) structural walls that are susceptible to shear failure after flexural yielding. The investigation was divided into an experimental and an analytical phase. There were three main objectives in the …

    uiuc Repository record for Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading (opens in a new tab)

  16. Response and failure analysis of a graphite-epoxy laminate containing terminating internal plies

    … stress distributions in the vicinity of a ply drop are determined for a graphite-epoxy laminate subject to axial tension and compression by a finite element analysis. It is shown that the interlaminar stresses have a maximum magnitude at the ply drop-off, and decrease proceeding away …

    vt Repository record for Response and failure analysis of a graphite-epoxy laminate containing terminating internal plies (opens in a new tab)

  17. Seismic Rock Slope Failure Modes and Time-Dependent Displacements Using Single Block Methods

    Seismically induced rock slope failures have resulted in billions of dollars of economic damage and enormous loss of life throughout the world. Accurate prediction of the triggering and run out of these failures is elusive for a variety of reasons, including knowledge of the physical modes of …

    washington Repository record for Seismic Rock Slope Failure Modes and Time-Dependent Displacements Using Single Block Methods (opens in a new tab)

  18. Failure processes in submarine landslides: a geomorphological approach

    … technique for the quantitative characterisation of bathymetric<br/>data sets. The technique integrates three main geomorphometric methods: morphometric<br/>attributes and their statistical analyses, feature-based quantitative representation, and<br/>automated topographic classification. These …

    soton Download PDF for Failure processes in submarine landslides: a geomorphological approach (opens in a new tab)

  19. Comparison of Tensile Bond Strength of Denture Reline Materials on Denture Bases Fabricated with CAD-CAM Technology

    Purpose: The purpose of this study was to evaluate the tensile bond strength of both hard and soft denture reline materials on denture bases fabricated by 3D printing and milling CAD-CAM technology. Materials and methods: One hundred fifty denture base samples (injected, milled, printed) were …

    tamu Repository record for Comparison of Tensile Bond Strength of Denture Reline Materials on Denture Bases Fabricated with CAD-CAM Technology (opens in a new tab)

Page 1 of 8