Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 117 for “"Modulus of rupture"”.
-
An investigation of the modulus of rupture of square tubing subjected to pure bending
Electronic Thesis or Dissertation
-
An investigation of the modulus of rupture of I-sections subjected to pure bending
Electronic Thesis or Dissertation
-
Experimental Determination of Modulus of Rupture for Concrete Masonry Beams and Implications for the TMS 402/602 Code
Currently, the experimental database for Modulus of Rupture (MOR) of masonry beams is limited, and current provisions in TMS 402/602-22 use the MOR values from wallette tests. The primary goal of this research is to experimentally determine the parameters that influence MOR. The secondary goal of …
-
An Applied Statistical Reliability Analysis of the Modulus of Elasticity and the Modulus of Rupture for Wood-Plastic Composites
… composites (WPC) are materials comprised of wood fiber within a thermoplastic matrix and are a growing and important source of alternative wood products in the forest products industry. WPC is gaining market share in the building industry because of durability/maintenance advantages of WPC …
-
Strength Properties of Juvenile and Mature Wood of Twelve Families of Loblolly Pine (Pinus Taeda L.)
<p>The wood mechanical properties of progeny from twelve open-pollinated parent trees were examined. Six families were from parents which had high wood specific gravity and six were from parents which had low wood specific gravity. Thirty-two-year-old trees, that had been planted at Many, …
-
Study of nickel-plated iron powder for powder metallurgical applications.
The use of coated iron-nickel powders in the production of sintered components of low-alloy steels has certain advantages over blended mixtures of the elemental powders. In particular, the former produce a more homogeneous material after a specific sintering treatment.There is a limited amount of …
-
STRUCTURAL INTEGRITY AND PHYSICAL PROPERTIES OF PONDEROSA PINE OVER TIME AFTER DEATH BETWEEN VECTORS OF MORTALITY
In an era of accelerated climate change, with persistent and increasing disturbance on our landscapes it is important to increase our knowledge of how these natural disturbances effect our lands. This study investigated the changes that take place in ponderosa pine (Pinus ponderosa) stems after …
-
STRUCTURAL INTEGRITY AND PHYSICAL PROPERTIES OF PONDEROSA PINE OVER TIME AFTER DEATH BETWEEN VECTORS OF MORTALITY
In an era of accelerated climate change, with persistent and increasing disturbance on our landscapes it is important to increase our knowledge of how these natural disturbances effect our lands. This study investigated the changes that take place in ponderosa pine (Pinus ponderosa) stems after …
-
Assessment of some wood properties by near infrared spectroscopy
… However, existing reports on this use of NIRS have paid little attention to the effect of wood surface condition and grain orientation. This study therefore used NIRS to assess wood density, modulus of elasticity, modulus of rupture, grain angle, and annual ring width, studying whether …
-
Effect of coarse aggregate characteristics on hardened properties of concrete
The effects of coarse aggregate properties and characteristics on the properties of hardened concrete were examined in this experimental program. Tests were performed to determine effects on modulus of elasticity, compressive strength, splitting tensile strength, modulus of rupture, shrinkage, and …
-
Flexural behavior of portland cement based composites subjected to high strain rates
<p>This investigation studied the modulus of rupture and energy of rupture of mortar, concrete, and steel fiber reinforced mortar at various rates of flexural straining. The strengths of the composites were varied by changing the water cement ratios. Single point flexural loading tests were …
-
The feasibility of using steel fiber reinforced concrete in rectangular containers
… (SFRC) was tested to determine the feasibility of its use in the production of rectangular waste containers. Three steel fiber lengths (5/8-inch, 3/4-inch, 1-inch) were tested. It was found that the optimum fiber content was 2% by volume based on the workability of the concrete mixture. Also, it …
-
Theoretical evaluation of the break off test for concrete
Strength of concrete is normally measured using the standard cylinder or cube. The measured strength is used for design. The accuracy of concrete strength is frequently challenged, particularly in large concrete structures where size effect of the test specimens is attributed for the differences. …
-
An analysis of variation in moduli of elasticity and rupture in young Douglas fir
The results of two hundred and fifty-eight static bending tests on young Douglas fir were obtained from the Vancouver Laboratory of the Forest Products Laboratories of Canada. Twenty-two trees had been sampled; seven of approximately sixty years of age from Port Moody, eight of about seventy years …
-
Flexural behavior of a glass fiber reinforced wood fiber composite
The static and dynamic flexural properties of a wood fiber matrix internally reinforced with continuous glass fibers were investigated. When modelled as a sandwich composite, the static flexural modulus of elasticity (MOE) of glass fiber reinforced hardboard could be successfully predicted from the …
-
Relating pressure response profile during hot pressing to property development in flakeboard
The pressure response profile of a flakeboard during hot pressing was exclusively studied using variables of flake species (aspen and lodgepole pine), flake types (small-size flakes and large-size flakes), resin contents (0 and 8 percent), moisture contents (2 and 6 percent), and press closing …
-
Self-Consolidating Concrete for Box Culverts in South Dakota Using Local Aggregates
… (SDSU) and the South Dakota Department of Transportation (SD DOT) have begun research into the feasibility and performance of self-consolidating concrete (SCC) to be used in SDDOT projects in South Dakota. Box culverts were selected to be the first members to be developed using SCC in …
-
Material Properties of Polypropylene Fiber Reinforced Concrete
… investigation examined the material properties of polypropylene fiber reinforced concrete. The material properties considered are: compressive strength, tensile strength, flexural strength (modulus of rupture), energy absorption (toughness index), modulus of elasticity, Poisson's ratio, impact …
-
Electronic Waste as Synthetic Aggregate For Portland Cement Concrete
… waste problem. Given the scale and the volume of global concrete construction, incorporating e-waste as a lightweight concrete construction material can potentially reduce sending electronic waste to landfills, which is an environmental benefit. Additionally, it will help with saving the …
-
Physical Properties of Concrete Reinforced with Polypropylene Fibers
The physical properties of concrete reinforced with polypropylene fibers are examined in this experimental investigation. Specifically, the properties of workability, compressive strength, tensile strength, and flexural strength (modulus of rupture) are investigated. Two separate concrete mixes are …
Page 1 of 6