Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Modulus reduction"”.
-
Modulus reduction dynamic analysis
… is presented. The analysis is based on a modulus reduction approach which uses a reduced modulus to simulate the softening induced in soils during cyclic loading. The effects of the inertia forces developed during dynamic loading on the induced deformations are also included through an …
-
Confining Stress-Dependencies of Shear Modulus Reduction and Damping Models for Sands
Normalized shear modulus reduction (G/Gmax) models represent the nonlinear shear stress-shear strain response of soils. Modulus Reduction and Damping (MRD) curves are used to obtain degraded soil properties for equivalent-linear site-response analysis, calibrate nonlinear stress–strain models, and …
-
Development of a new family of normalized modulus reduction and material damping curves
… that can be used to generate normalized modulus reduction and material damping curves. This framework is composed of simple equations, which incorporate the key parameters that control nonlinear soil behavior. The data collected over the past decade at The University of Texas at Austin …
-
Investigation of Shear Modulus and Material Damping of a Lightly Cemented Silty Sand Representing Offshore Soil
… examines the impact of cement content on shear modulus, shear modulus reduction, shear wave velocity, and material damping of lightly cemented fine silty sand. A series of Resonant Column and Torsional Shear tests were conducted. The results were analyzed and compared to existing literature. The …
-
Assessment of the Dynamic Properties of Soils from Triaxial Tests
… on clay and sand to establish site-specific modulus reduction and damping ratio curves at small strain amplitudes. The shear strength and cyclic resistance of Leda clay under triaxial testing mode is noted to be significantly higher than the previously reported values under simple shear …
-
Base Case Shear-Wave Velocity Profiles and Non-linear Material Property Models of Local Site Conditions in South Carolina for Seismic Site Response Analyses
… outcrop site conditions. New normalized shear-modulus reduction and damping models for southeastern U.S. residual soil and saprolite are used. The models, based on resonant column (RC) and torsional shear (TS) measurements, are expressed as functions of small-strain shear modulus, confining …
-
Integrated full-scale testing and numerical analysis of pile foundations under large-strain and quasi-static cyclic lateral loading
… to determine the damping ratio as well as shear modulus reduction curves which are site specific, 3. 3D-dimensional finite element modeling in OpenSeesPL (Lu, et al., 2011) using pressure independent and pressure dependent multi-yield (PIMY and PDMY) constitutive models, 4. a parametric …
-
Issues related to site property variability and shear strength in site response analysis
… low shear strengths implied by commonly used modulus reduction curves. Therefore, modulus reduction and damping curves can be modified at shear strains greater than 0.1% to provide a more realistic soil model for site response. However, even after these modifications, nonlinear and equivalent …
-
Proposed ASTM Standard for the Stokoe-type Resonant Column Torsional Shear Device
… Stokoe-type devices at the UofA. The obtained modulus reduction curves and damping curves were compared with curves developed at the University of Texas. The UofA obtained modulus reduction curves were found to plot at higher values than the Texas curves, but both curves followed the same …
-
Seismic basin effects over soft-sediment filled basins in Ottawa, Canada
… recordings, a detailed soil profile, local modulus reduction and damping ratio curves, and local earthquake recordings are required as input. However, soil-to-rock amplifications and spectral curves varied from the predicted 1D output, suggesting the influenced of 2 and 3D effects. …
-
Behaviour of sensitive Leda clay under simple shear loading
… tests proved to be an optimum means of obtaining modulus and damping data in laboratory. Material specific modulus reduction and damping ratio curves are presented for Ottawa area Leda clay. Results show that behaviour of sensitive clays is not similar to that of typical non sensitive clays.
-
Cyclic Behaviour and Dynamic Properties of Soils Under Simple Shear Loading
… if clays are normally consolidated.Site-specific modulus reduction and damping curves are proposed for Ottawa-Quebec area clays and sand. These site-specific curves are unique for sensitive clays and curves generated for sand are close to the average and lower bound curves reported in the …
-
Dynamic characteristics of municipal solid waste (MSW) in the linear and nonlinear strain ranges
… to investigate the dynamic properties (shear modulus and material damping ratio) of municipal solid waste (MSW). the MSW materials were recovered from the Tri-Cities landfill adjacent to the San Francisco Bay in California. A total of 30 specimens 2.8-in. (71.1-mm) and 6.0-in. (152.4-mm) of …
-
Determination of Material Parameters of E-GlassEpoxy Laminated Composites in ANSYS
… in ANSYS Workbench. The method uses experimental modulus-reduction vs. strain data for only two laminates to fitt all the parameters of PDA (F 2t, F6, Gc tm ) and DDM (GIc, GIIc) . Fitted parameters are then used to predict and compare with the experimental behavior of other laminates with the …
-
CENTRIFUGE AND NUMERICAL MODELLING OF SOFT CLAY-PILE-RAFT FOUNDATIONS SUBJECTED TO SEISMIC SHAKING
… test results showed that strain-dependent modulus reduction and cyclic stiffness degradation feature strongly in the dynamic behaviour of the clay specimens. In the centrifuge tests involving uniform clay beds without piles, the effects of modulus reduction and stiffness degradation were …
-
Advancements in resonant column testing of soils using random vibration techniques
… of the end platens were measured. Shear modulus and damping were then determined by fitting the measured peak frequencies and amplitudes by theoretical rotational transfer functions. Nonlinear strain-dependent modulus and damping curves were generated by measurement of the multi-modal …
-
Fracturing fluid effects on Young's modulus and embedment in the Niobrara Formation
… are influenced by many factors. Young's modulus reduction, which essentially means weakening of the formation, is one of these factors. This reduction damages the reservoir and makes embedment of proppants into the fracture face a detrimental effect on fracturing success. The goal of this …
-
Dynamic properties of an undisturbed clay from resonant column tests
… founded on such soil. The dynamic shear modulus and damping appear to be a complex function of many variables, and a wide range of values have been reported in the literature. Consequently, considerable uncertainty exists in choosing the appropriate values of shear modulus and damping for …
-
Experimental and analytical techniques for the assessment of in vitro implant migration in polymer foam models
… materials themselves; the foams showed less modulus degradation and accumulated strain compared to cancellous bone. Relationships were established for life, secondary strain rate, modulus reduction and accumulation strain in terms of normalised stress and life fraction. In the absence of …
-
An Effective Model for Dynamic Properties of Local Soils and Their Influence on Seismic Response of a Typical Reinforced Concrete Building
… anisotropy can be captured in the maximum shear modulus and theoretical maximum damping ratio. Using the experimental results and available data in the literature, the model accounts for modulus reduction and damping, and empirical relationships for maximum shear modulus and minimum damping. …
Page 1 of 3