Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Moisture Durability"”.
-
Towards improving and developing a plastination technique for bamboo culms and flax fibres
… have a poor fibre-matrix bond, absorb a lot of moisture, are susceptible to microbial attack, and are flammable. To improve these issues, chemical treatments are normally used. A new treatment technique, called plastination, was recently used to improve the moisture durability of whole bamboo …
-
Moisture response of CLT floor assemblies under indoor water leakage: Experimental and simulation-based assessment
… use in sustainable construction, the long-term moisture performance of Cross-Laminated Timber (CLT) under damp service conditions remains a critical durability concern. This study investigates the moisture response of CLT floor assemblies under indoor water leakage through controlled laboratory …
-
Characterization of modified polyimide adhesives
… improved the resistance of stressed specimens to moisture. Aluminum-sec-butoxide used as a primer was also found to improve the moisture durability of bonds prepared with these materials.
-
Cross-Laminated Timber made of Unmodified and Thermally Modified Yellow-Poplar Lumber
… especially for exterior applications, its durability must be improved to withstand conditions ranging from dry indoor environments to moisture-prone settings. Thermally modified wood (TMW) is a potential solution to enhance CLT's moisture durability and reduce moisture-related issues. …
-
Fundamental Characterisation of Asphalt Overlaid Rigid Pavements
… Among the key factors influencing pavement durability are thermal properties, which directly affect mechanical behaviour, heat distribution in asphalt-overlaid rigid pavements, interface bonding and skid resistance. This thesis investigates the incorporation of conductive fillers graphene, …
-
PERFORMANCE AND ENVIRONMENTAL IMPACT OF WASTE GLASS ASPHALT IN COLD REGIONS
… its low-temperature cracking resistance, moisture susceptibility, field performance, and life-cycle environmental impacts. A series of laboratory tests were performed on asphalt mixtures incorporating various proportions of crushed waste glass aggregate, including Disk-Shaped Compact …
-
Performance-based multiple recycling of asphalt materials - A multiscale assessment across five aging-rejuvenation cycles
… about the feasible number of cycles and durability risks. Against this backdrop, this doctoral thesis investigates how asphalt binders and mixtures evolve under multiple aging-rejuvenation cycles and develops an evidence-based basis for rejuvenator selection, feasible recycling limits, …
-
Moisture Response of Wall Assemblies of Cross-Laminated Timber Construction in Cold Canadian Climates
… Should wood be exposed to elevated amounts of moisture, rots and moulds may damage the product or even risk the health of the occupants. As CLT panels are a relatively new engineered wood product, the moisture characteristics have yet to be properly assessed. Consequently, the amount of decay …
-
The Hygrothermal Performance of Exterior Insulated Wall Systems
… America and the materials used are vulnerable to moisture damage. This damage typically occurs first at the wall sheathing in the form of mould, fungal growth and rot. Increased thermal resistance can lead to two potential issues related to moisture durability: 1) increased potential for air …
-
Moisture conditions in rain exposed wood joints - Experimental methods and laboratory measurements
This thesis concerns the moisture conditions in rain exposed wood structures, i.e. wood exposed to high moisture levels. The focus was on the microclimate (the climate at the wood surface) and the material climate (the wood moisture content) in joints. Methods for determination of microclimate, …
-
Durability of timber members : Moisture conditions and service life assessment of bridge detailing
… timber in outdoor above-ground construction.Wood moisture content and temperature, i.e. the material climate involved, are two fundamental indicators of decay activity of wooden members. Performance based service life assessment of wood is largely comprised of two parts: (1) establishing the …