Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1481 for “"Mortar"”.

  1. Sulfur mortar and polymer modified sulfur mortar lining for concrete sewer pipe

    … of hydrogen sulfide from sewerage. Sulfur mortar is a material that proved an excellent resistance to sulfuric acid attack, also, the material showed an excellent bonding, durability and strength properties when bonded with concrete.;This research is a presentation of testing and evaluation …

    iastate Repository record for Sulfur mortar and polymer modified sulfur mortar lining for concrete sewer pipe (opens in a new tab)

  2. A Relationship Between the Strengths of Type N Cubic Mortar Specimens and In-Situ Mortar

    The compressive strength of mortar is typically determined using the American Societyfor Testing and Materials (ASTM) standard method using 2 inch cubes which are compressed tillfailure. There is however a disparity between the compressive strengths of mortar cubes, and insitumortar. This disparity …

    byu Repository record for A Relationship Between the Strengths of Type N Cubic Mortar Specimens and In-Situ Mortar (opens in a new tab) Download PDF for A Relationship Between the Strengths of Type N Cubic Mortar Specimens and In-Situ Mortar (opens in a new tab)

  3. Mechanical Properties of Polymer Modified Mortar

    The mechanical properties of the polymer-modified mortar are markedly improved over conventional cement mortar. We utilized recycled ABS in powder form and a polymer latex emulsion, polymer percentage ranges from 0 to 25 percent by polymer/cement ratio were investigated. The mechanical properties …

    unt Repository record for Mechanical Properties of Polymer Modified Mortar (opens in a new tab)

  4. CARBONATION OF MORTAR CONTAINING A MINERAL ADMIXTURE

    … value and the carbonation coefficient of mortar specimens cured in water. Moreover, irrespective of the curing period, curing condition or water to cement ratio, a denser microstructure of mortar is found to lower the rate of carbonation. For mortar specimens containing a mineral …

    nus Repository record for CARBONATION OF MORTAR CONTAINING A MINERAL ADMIXTURE (opens in a new tab) Download file for CARBONATION OF MORTAR CONTAINING A MINERAL ADMIXTURE (opens in a new tab)

  5. Sulfuric acid resistance of fly ash mortar

    … fly ash was used as a cement replacement of mortar to investigate its sulfuric acid resistance. Different types and different percentages of fly ashes were mixed with and without admixtures including microsilica, and superplasticizer. The main parameters investigated included the chemical …

    njit Repository record for Sulfuric acid resistance of fly ash mortar (opens in a new tab)

  6. Utilization of processed fly ash in mortar

    … ash that enhances the strength gain of cement mortars. It is discovered that grinding can make all the studied fly ashes more suitable for concrete use at higher replacement value than previously anticipated even when the effect of high carbon content is considered. In this study, new …

    njit Repository record for Utilization of processed fly ash in mortar (opens in a new tab)

  7. Properties of mortar bond to various brick

    … Pearson Method. Proposal II - A comparison of mortar bonds using two mortar flows, three mortars, and two methods of forming couplets. Proposal III - A comparison of mortar bond to brick with emphasis in texture of surface of brick in contact with mortar which joins them. Proposal IV - A …

    vt Repository record for Properties of mortar bond to various brick (opens in a new tab)

  8. A study of hydrated lime and mortar

    Thesis (B.S.)--Michigan Agricultural College, 1921

    msu Repository record for A study of hydrated lime and mortar (opens in a new tab)

  9. Bond strength performance characteristics of brick-mortar interfaces.

    … in-house, to measure the bond strength of brick-mortar interfaces. The thesis postulates that direct tensile bond strength values can be used as a means of assessing compatibility of brick and mortar properties which directly influence the structural and durability performance of brickwork. The …

    sheffield-hallam Download PDF for Bond strength performance characteristics of brick-mortar interfaces. (opens in a new tab)

  10. Characterization of the interface between brick and mortar

    <p>Although mortar has been performing its role of holding masonry structures together for hundreds of years, masonry does fail, and the majority of cases of failure occur at the interface between the mortar and the masonry unit. The purpose of this investigation was to examine that interface in …

    iastate Repository record for Characterization of the interface between brick and mortar (opens in a new tab)

  11. Durability of alkali-activated mortar in sewage environment

    … of low-calcium fly ash based geopolymer mortar (FA-GPm) and alkali-activated slag based mortar (AASm) in comparison with commercially used sulphate resistant Portland cement (SRPCm) and calcium aluminate cement mortars (CACm). Firstly, specimens were placed in Manly wastewater treatment …

    unsw Repository record for Durability of alkali-activated mortar in sewage environment (opens in a new tab)

  12. Pulverized silica as an admixture in concrete & mortar

    Thesis (M.S.)--Michigan State College of Agriculture and Applied Science. Dept. of Civil Engineering, 1940

    msu Repository record for Pulverized silica as an admixture in concrete & mortar (opens in a new tab)

  13. A new technique for the radiocarbon dating of mortar

    Development of a modified mortar dating technique by the ¹⁴C method is described. This procedure may be very valuable in the detailed dating of the construction of ancient buildings and may even resolve different events or phases of construction in the same structure. Carbon-14 analysis of samples …

    texas Repository record for A new technique for the radiocarbon dating of mortar (opens in a new tab)

  14. Floor Leveling Mortar Quantity Estimation in High-Rise Buildings

    … regularity over a longer distance. Self-leveling mortars are commonly used to increase the flatness and levelness of concrete floors and improve their surfaces. The American Society for Testing and Materials (ASTM) provides guidelines (i.e., FF and FL limits) for floor leveling. However, these …

    houston Repository record for Floor Leveling Mortar Quantity Estimation in High-Rise Buildings (opens in a new tab)

  15. Enhancing Urban Energy Sustainability through PCM-Integrated Mortar Infrastructure

    … situation, this research aims to design novel mortar mixtures to regulate heat in urban spaces affected by temperature fluctuations, thereby enhancing urban energy sustainability using Phase-Change Material (PCM) and recycled crushed glass with low thermal conductivity. This study also aims to …

    texas-state Repository record for Enhancing Urban Energy Sustainability through PCM-Integrated Mortar Infrastructure (opens in a new tab)

  16. Aspects of the tensile strength of brick-mortar joints.

    … which affect the tensile bond strength of brick mortar joints and to verify their relative importance, both by reference to the literature, and by experimentation. From these investigations the most important aspects are seen to be the absorption of water from the mortar by the brick, and the …

    sheffield-hallam Download PDF for Aspects of the tensile strength of brick-mortar joints. (opens in a new tab)

  17. Strength characteristics of mortar filled steel tubes (short series)

    A study of the strength of mortar-filled steel tubes was carried out by H. Salani and the Author during 1959-60. Long tubes under axial compression and under combined axial compression and bending were investigated by H. Salani, short specimens under axial compression and long tubes under lateral …

    rice Repository record for Strength characteristics of mortar filled steel tubes (short series) (opens in a new tab)

  18. Binding of Nitrite in Concrete, Cement Mortar and Paste

    … the effect of adding the fine aggregate (mortar mix) on nitrite binding was assessed. Finally, the mix with coarse aggregate (concrete mix) was evaluated. In-situ leaching method was used to obtain the pore solution that was needed. Measurement of pore solution with the In-situ leaching …

    usf Repository record for Binding of Nitrite in Concrete, Cement Mortar and Paste (opens in a new tab)

  19. A New Shear Test Method for Mortar Bed Joints

    … devised to determine the shear strength of a mortar joint, it was concluded that among the existing methods, the triplet test is the simplest to perform and the Hofmann & Stöckl test provides the best results in terms of uniform stresses. The advantages of these two tests were combined in a …

    calgary Repository record for A New Shear Test Method for Mortar Bed Joints (opens in a new tab)

Page 1 of 75