Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 931 for “"Mould"”.

  1. Mould growth in HDB environment, Singapore

    Mould growth attacks HDB (Housing Development Board) which houses 80-90% of Singapore population. The quality of life in the HDB environment therefore needs to be maintained and enhanced due to mould growth. This study formulates the prevention and remediation strategies for mould growth problem in …

    nus Repository record for Mould growth in HDB environment, Singapore (opens in a new tab) Download file for Mould growth in HDB environment, Singapore (opens in a new tab)

  2. Temperature Mould Maintenance during Automatic Welding

    … the temperature and the dilatation of the mould during the welding process. The mould to be welded is preheated to prevent excessive stress due to extreme temperature differences in the material. As well, it is necessary to maintain the temperature of the mould during the welding process in …

    waterloo Repository record for Temperature Mould Maintenance during Automatic Welding (opens in a new tab)

  3. Growth-Associated aspects of mould physiology.

    … composition and anaplerotic metabolism on the mould, Aspergillus nidulans. The validity of classical microbial growth equations, which have been well tested for unicells, was established for mould growth. Continuous cultures of A.nidulans followed Monod Kinetics when growing by simple hyphal …

    kent Download PDF for Growth-Associated aspects of mould physiology. (opens in a new tab)

  4. Aspects of mould design in electroslag casting

    … It is likely that channel cooled Aluminium moulds will be employed. Thus, the criteria for the design of moulds to be used in this process were examined. Temperatures in a mould section were measured and compared to those calculated from a model developed assuming 3-D quasi steady state heat …

    ubc Repository record for Aspects of mould design in electroslag casting (opens in a new tab) Download PDF for Aspects of mould design in electroslag casting (opens in a new tab)

  5. Breaking the mould, cooking semiotics and heterogeneity

    At the heart of the dissertation are two beliefs: first, that food preparation operates symbolically in literature and film, and second, that the symbolic function of food preparation is "multifunctional" in that it varies depending on social context. Supplementing these beliefs with elements of …

    manitoba Repository record for Breaking the mould, cooking semiotics and heterogeneity (opens in a new tab)

  6. Digital Mould: Hybridizing Digital-Analogue Fabrication Techniques

    … explored through a bespoke design for a digital mould, which maintains the digital design intent allowing the author to maintain control of the exploration and final iteration of the work. Through the use of the digital mould, this thesis will explore possibilities of feedback between the digital …

    carleton Repository record for Digital Mould: Hybridizing Digital-Analogue Fabrication Techniques (opens in a new tab)

  7. Mould thermal response, billet surface quality and mould-flux behaviour in the continuous casting of steel billets with powder lubrication

    The main objectives of this study were to examine mould thermal response and billet surface quality during continuous casting of steel billets with powder lubrication, and to compare with oil lubrication. Measurements were carried out on an operating billet caster to determine mould-wall …

    ubc Repository record for Mould thermal response, billet surface quality and mould-flux behaviour in the continuous casting of steel billets with powder lubrication (opens in a new tab) Download PDF for Mould thermal response, billet surface quality and mould-flux behaviour in the continuous casting of steel billets with powder lubrication (opens in a new tab)

  8. Die and mould making using the polyhedral concept

    … Manufacture of products require tools (dies, moulds, punches, etc.) in processes ranging from casting and injection-moulding to forging, punching and coining. These tools, as are all three-dimensional. solids, are bounded by surfaces. Different manufacturing processes present different …

    ubc Repository record for Die and mould making using the polyhedral concept (opens in a new tab) Download PDF for Die and mould making using the polyhedral concept (opens in a new tab)

  9. Mould response and its impact on billet quality

    … is the water-cooled, oscillating copper mould. Mould interaction with the billet, both thermal and mechanical, governs billet quality and productivity. The heat extraction capability of the billet mould has been well addressed in the literature, but the mechanical response of the mould, …

    ubc Repository record for Mould response and its impact on billet quality (opens in a new tab) Download PDF for Mould response and its impact on billet quality (opens in a new tab)

  10. Unidirectional solidification studies of ingot mould cast irons

    … whilst solidifying in a cylindrical ceramic mould whose base is supported and closed by a water cooled copper chill. Readings from a series of thermocouples, monitoring temperatures within the iron, have enabled the establishment of a controlled solidification technique, under unidirectional …

    sheffield-hallam Download PDF for Unidirectional solidification studies of ingot mould cast irons (opens in a new tab)

  11. The effects of high speed casting on the mould heat transfer, billet solidification, and mould taper design of continuously cast steel billets

    … industrial trial was conducted at Company H. The mould was instrumented with thermocouples and a linear variable displacement transducer to study the thermal response of the system to changes in casting conditions. Billet samples were collected to study the effects of high casting speeds on …

    ubc Repository record for The effects of high speed casting on the mould heat transfer, billet solidification, and mould taper design of continuously cast steel billets (opens in a new tab) Download PDF for The effects of high speed casting on the mould heat transfer, billet solidification, and mould taper design of continuously cast steel billets (opens in a new tab)

  12. Application of statistical process control in injection mould manufacturing

    To apply statistical process control in injection mould manufacturing, short-run SPC methods should be used. Due to the characteristics of mould manufacturing, direct application of short-run SPC presents many problems. An approach is proposed in this thesis to solve these problems. The injection …

    nus Repository record for Application of statistical process control in injection mould manufacturing (opens in a new tab) Download file for Application of statistical process control in injection mould manufacturing (opens in a new tab)

  13. Initial solidification phenomena in the continuous casting slab mould

    … partially freeze within the period of a typical mould oscillation cycle. Lubrication theory has shown that a significant pressure can be generated in the flux channel by the reciprocating motion of the mould relative to the shell. The shape of the meniscus has been computed as a function of the …

    ubc Repository record for Initial solidification phenomena in the continuous casting slab mould (opens in a new tab) Download PDF for Initial solidification phenomena in the continuous casting slab mould (opens in a new tab)

  14. The biodegradation of quaternary ammonium compounds by mould fungi

    … It was suggested that the degradation of QACs by mould and stain fungi had reduced the efficacy of QACs. This thesis describes a study of the role that moulds play in limiting the performance of DDAC. Fungi were isolated from DDAC-treated stakelets placed in a field test site at UBC. Other fungal …

    ubc Repository record for The biodegradation of quaternary ammonium compounds by mould fungi (opens in a new tab) Download PDF for The biodegradation of quaternary ammonium compounds by mould fungi (opens in a new tab)

  15. Mould Resistance of Full Scale Wood Frame Wall Assemblies

    … objective of this study was to investigate mould growth resistance of different types of wood products which include the sheathing and framing within full scale wall assemblies. Secondary objectives were to investigate the difference in mould growth resistance between borate-treated and …

    waterloo Repository record for Mould Resistance of Full Scale Wood Frame Wall Assemblies (opens in a new tab)

  16. Computer aided engineering for injection mould cooling system design

    … in the cooling stage, of a typical injection moulding cycle, is a large factor in the productivity and efficiency of a plastic manufacturing process, and for this reason, must be minimised. In order to do this a cooling system is employed throughout the mould core. This thesis describes the …

    dcu Download PDF for Computer aided engineering for injection mould cooling system design (opens in a new tab)

Page 1 of 47