Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 164 for “"Multi-axial"”.
-
Liquefaction of sands under multi-axial loading
… study of the undrained behaviour of sands under multi-axial loading is presented. The study was performed by using the hollow cylinder torsional (HCT) device. The HCT is the only device that permits a soil specimen to be subjected to multi-axial loading with controlled variations in the …
-
Strength testing under multi-axial stress states
A true triaxial apparatus was designed and fabricated to apply mechanical loading to achieve multi-axial stress states. The University of Minnesota plane strain apparatus was equipped with piston assemblies that generated intermediate principal stress σ_II up to 100 MPa. The minor principal stress …
-
Multi-Axial Fatigue Analysis of Thermite Rail Welds
… Fatigue life estimates are made by means of a multi-axial critical-plane fatigue algorithm that computes the fatigue damage based on the time history of stress tensors. The finite element method is used to analyze a full-scale replica of the wheel-track system comprising axle, wheel, …
-
Parameter estimation in multi-axial thermal diffusivity experiments
Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 2005
-
Response of asphalt matrix under multi-axial stress state
… states under vehicular loading. A combination of axial and shear stress has been identified as a potential cause of top down cracking (or more precisely near surface cracking) in asphalt surface. Therefore, in terms of modeling the material response a pertinent question is whether the typical …
-
Development of a multi-axial load distribution measurement device
… The aim of this study was to develop a low-cost multi-axial load transducer array to measure the distribution of stress beneath the human foot during walking. A preexisting piezoelectric-based load transducer and several novel transducer designs using hydraulic, optoelectronic and magnetic-based …
-
Multi-axial Active Isolation for Seismic Protection of Buildings
… excitations. Earthquakes are intrinsically multi-dimensional, resulting in out-of-plane responses, including torsional responses. Therefore, an active isolation system for buildings using multi-axial active control devices against multi-directional excitations must be considered. The focus …
-
Metal waveguides for multi-axial light guiding at nanometer scales
… apply our analytical technique to optimize a bi-axial waveguide that can bend light at 90 degree, constructed from two uni-axial metal waveguides. The optimization procedure consists of mapping out wavevector values of the electromagnetic modes sustained by the two waveguides over the operational …
-
Automated Multi-Axial Winding Device for Smooth Muscle Cell Fibers
… This dissertation proposes the development of a multi-axial orientation device that can act as a practical actuating media for the process of cell fiber winding. The device aims to wind long strings of muscle fibers onto organ frames concerning multiple axes automatically, considering aspects …
-
Multi-axial failure of high-performance fiber during transverse impact
The effect of projectile nose geometry on ensuing wave development in high-performance yarns is explored during single yarn transverse impact. Special attention has been placed on visualizing the immediate region around the projectile-yarn contact site for 0.30-cal round, 0.30-cal fragment …
-
Development of Multi-Axial Fatigue Retrofits for Lock Gate Components
… because of this. These stresses are known to be multi-axial stresses which cause multi-mode cracking at the crack tips of the developed fatigue cracks. The thesis herein presents an analytical and experimental investigation into multi-axial fatigue crack mitigation by the use of carbon fiber …
-
GRANULAR FLOW OF AN ADVANCED CERAMIC UNDER EXTREME MULTI-AXIAL LOADING
… (intermediate) and ∼ 70 μm (coarse), under uni-axial strain conditions using quasi-static MTS tests and dynamic Kolsky bar experiments. Quasi-static powder compaction is also conducted on a rounded powder (from heat-treatment of the fine powder) to investigate the shape effect. Pressure-shear …
-
Multi-axial Thermomechanical Characterization of Shape Memory Alloys for Improved Stability
… fields. Despite SMAs typically operating under multi-axial stress states in applications, most previous in situ neutron diffraction based investigations on SMAs have been limited to homogenous stress states as a result of uniaxial loading. The current investigation spatially maps thermoelastic …
-
Controller Synthesis of Multi-Axial Robotic System Used for Wearable Devices
Wearable devices are commonly used in different fields to help improving performance of movements for different groups of users. The long-term goal of this study is to develop a low-cost assistive robotic device that allows patients to perform rehabilitation activities independently and reproduces …
Page 1 of 9