Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"Multi-physics model"”.
-
Numerical analysis of a multi-physics model for trace gas sensors.
… help with disease diagnosis. These sensors are modelled by a coupled system of complex elliptic partial differential equations for pressure and temperature. Solutions are approximated using the finite element method which we will show admits a continuous and coercive variational problem with …
-
Multi-physics Model Of Key Components In High Efficiency Vehicle Drive
… electric/electric drive systems, from both multi-physics and system level perspectives. Electrical circuit theory, electromagnetic Finite Element Analysis (FEA), and Computational Fluid Dynamic (CFD) finite volume method will be used primarily in this work. The work has total of five parts, …
-
Multi-physics model for enhanced oil recovery in liquid-rich unconventional reservoirs, A
… in the reservoir at different scales should be modeled properly. These issues have motivated us to conduct this research study to evaluate the potential of water injection enhanced oil recovery in liquid-rich unconventional reservoirs accounting for the effects of salt concentration, fluid type, …
-
Multi-Physics Model of a Dielectric Barrier Discharge Flow Control Actuator with Experimental Support
… presents an experimentally supported multi-physics model of a dielectric barrier discharge boundary layer flow control actuator. The model is independent of empirical data about the specific behavior of the system. This model contributes to the understanding of the specific mechanisms …
-
Multi-scale multi-physics model and hybrid computational framework for predicting dynamics of hydraulic rod seals
… of hydraulic systems. However, the fundamental physics of seal behavior is still poorly understood and the seal designers have virtually no analytical tools with which to predict the behavior of potential seal designs. In pursuit of a comprehensive physics based seal analysis/ design tool, in …
-
Multi-scale, multi-continuum and multi-physics model to simulate coupled fluid flow and geomechanics in shale gas reservoirs, A
… several efficient and accurate mathematical models and numerical solutions to unconventional reservoir development problems are developed. The first is the three-dimensional embedded discrete fracture method (3D-EDFM), which is able to simulate fluid flow with multiple 3D hydraulic fractures …
-
Multi-physics Modeling and Calibration for Self-sensing of Thermomechanical In-plane Microactuators
… However, to implement this approach a full model of the TIM would need to be obtained to describe the physics of the TIM, as well as development of a calibration approach to account for variations between devices. This thesis develops a multi-physics model of the TIM to realize this sensing …
-
Data Driven Prognosis: A Multi-Scale And Multi-Physics Approach
… data or experience from the same experiment. A multi-physics model based on the concept of excess curvature is then developed to predict short-term and long term stability profiles of any system. The model is first validated against simple "Balloon Burst" experiment and later used for analyzing …
-
Investigation on Multi-Physics Modelling of Fault Tolerant Stator Mounted Permanent Magnet Machines
… properties is taken into account. A complex multi-physics model is developed in order to assess the thermal state evolution of the switched flux machine during both healthy and faulty operation modes. This model couples the electro-mechanical domain with the thermal one, thus being able to …
-
Discrete multi physic model for the Rayleigh collapse of a single cavity
In this thesis, a Discrete Multi-Physics model based on Smoothed Particle Hydrodynamics is developed to simulate a Rayleigh collapse of a single bubble. All the simulations were run on a modified version of the open source software LAMMPS and visualised on OVITO. Initially a 2D model is validated …
-
Multi-physics modeling and design of switched reluctance machines and large synchronous generators
This dissertation focuses on developing multi-physics models for switched reluctance machines (SRMs) and the end regions of large synchronous generators (LSGs), so as to further exploit effective and efficient methods for the design optimization to improve their performances. In particular, for …
-
Creation of a digital twin for simulation of melt pool geometry in metal additive manufacturing
… is of utmost interest. Since it requires complex multi-physics models at a very small scale, producing simulations of desired accuracy takes a lot of time and computational power. Simpler analytical models have shown promise as they run in a fraction of the time, but at the cost of accuracy. The …
-
Numerical multiphysics modelling of Wick-Boiling in a crud with porosity variations to determine local Nickel Ferrite depositions within crud due to deep bed filtration
… are examined through a two-dimensional model. The multi-physics model is described by a coupled system of a thermal model, a momentum transfer model, a solute concentration transport model and a particle transport and absorption model. Various appropriate numerical methods were developed …
-
Multi-Physics Co-Simulation of Engine Combustion and Exhaust Aftertreatment system: Development of a Multi-Physics Co-Simulation Framework of Engine Combustion and Exhaust Aftertreatment for Model-Based System Optimisation
The incorporation of detailed chemistry models in internal combustion engine simulations is becoming mandatory as new combustion strategies and lower global emissions limits are setting the path towards a more efficient engine cycle simulation tool. In this report, the computational capability of …
-
Computational models for the simulation and monitoring of developing crystalline deposits originating from dripping process liquors.
… focused on the development and implementation of models such that the growth behaviour of crystalline formations could be evaluated and quantified for varying physical parameters. This was accomplished through both the adaptation of previous geological models, and the development of a coupled …
-
Friction stir welding simulation, optimization and design
… procedure to estimate friction stir welding model parameters, particularly those difficult to measure directly, is proposed and developed. The proposed methodology is seen to predict heat input power from the welding tool and contact conductivity between the workpiece and its supporting plate …
-
Autonomous Real-Time Model Updating Within Digital Twin Frameworks for Thermal Systems
… data assimilation to continuously update virtual models to represent the current state of their physical counterparts. A reliable digital twin can be leveraged by a system operator to perform diagnostics, optimize, and tests without ever needing the physical system. However, implementing effective …
-
An Experimentally Verified Model for Thermal Microactuators Including Nonlinear Material Properties, Radiation, and Intra-Device Heat Conduction
A multi-physics model and computational method is presented for predicting the performance of thermal microactuators at high input powers. The model accounts for nonlinear temperature dependence of material properties, heat loss due to radiation, and intra-device heat transfer by conduction across …
-
Ultrathin conducting polymer transducers : fabrication, characterization, and modeling
… of the resulting trilayers, and develop a model to simulate their bidirectional electromechanical ability (actuation and sensing). At first, ultrathin PEDOT-based trilayer actuators are fabricated via the vapor phase polymerization of 3,4-ethylenedioxythiophene combining with the layer by …
-
Modeling and Transient Simulation of a Fully Integrated Multi-Pressure Heat Recovery Steam Generator Using Siemens T3000
… manage the power output of traditional plants. Model-based techniques that can simulate a wide range of operating conditions can be valuable and insightful. For this reason, a multi-physics model of an HRSG has been developed in Siemens T3000 plant monitoring software. The layout and conditions …
Page 1 of 2