Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 66 for “"Multicrystalline"”.
-
Removal of dislocation cores from multicrystalline silicon by etching
<p>Approximately 50% of solar cells are based on multicrystalline silicon (mc-Si). A major limiting factor in their efficiency is recombination of electron-hole pairs at dislocations. Manufacturers of mc-Si wafers are focussing on reducing dislocation densities by modified casting techniques. …
-
Mechanical behavior of alternative multicrystalline silicon for solar cells
… silicon feedstock for the crystallization of multicrystalline silicon blocks promises cost reduction for the photovoltaic industry. Less expensive substrates made out of metallurgical silicon (MG-Si) are used as a mechanical support for the epitaxial solar cell. Moreover, conventional inert …
-
Carrier Recombination in Multicrystalline Silicon: A Study using Photoluminescence Imaging
… various carrier recombination mechanisms in multicrystalline silicon materials. One emphasis of the work has been recombination at grain boundaries, which is one of the limiting factors for the performance of multicrystalline silicon solar cells. An approach for quantifying the recombination …
-
Laser Surface Texturing of Multicrystalline Silicon to Reduce Solar Weighted Reflectance
… the mentioned limitations. In this work, multicrystalline silicon (mc-Si) which is less expensive compared to the single crystalline silicon (sc-Si), is textured with nanosecond laser; not only to decrease the optical loses due to reflection from the surface but also to increase the …
-
Formation of screen-printed contacts on multicrystalline silicon (mc-Si) solar cells
Commercial multicrystalline silicon (me-Si) solar cells use screen-printing process for depositing both the Ag paste based gridded front and Al based back (whole area) metal contacts.. This thesis relates to experimental and theoretical studies of contact formation mechanisms in silicon solar …
-
Characterization of residual stresses in birefringent materials applied to multicrystalline silicon wafers
… retardation in crystalline materials. Single and multicrystalline silicon was chosen as the model material. Silicon is an interesting and important material in its own right, and the use of photoelasticity to determine stresses at linear and planar defects can have important consequences in the …
-
Modeling of directional solidification of multicrystalline silicon in a traveling magnetic field
… important role in directional solidification of multicrystalline silicon influencing the temperature field and the crystallization interface as well as the transport of impurities. This work investigates the potential of a traveling magnetic field (TMF) for an active control of the melt flow. A …
-
Understanding of defect passivation and its effect on multicrystalline silicon solar cell performance
… Si. However, wafer preparation of cast multicrystalline Si materials account for more than 40% of the PV module manufacturing cost, which can be significantly reduced by introducing the ribbon-type Si materials. Edge-defined film-fed grown (EFG) and String Ribbon Si materials are among …
-
INVESTIGATION AND MITIGATION OF LIGHT AND ELEVATED TEMPERATURE INDUCED DEGRADATION IN MULTICRYSTALLINE SILICON SOLAR CELLS.
The efficiency of p-type multicrystalline silicon (multi-Si) PERC (passivated emitter and rear cell) solar cells is degraded upon exposure to 1-sun illumination at a temperature of above 50°C. This degradation effect aggravates at elevated temperature and is referred to as “light and elevated …
-
Surface and bulk passivation of multicrystalline silicon solar cells by silicon nitride (H) layer : modeling and experiments
… silicon nitride (SiN :H) antireflection layer on multicrystalline silicon (me-Si) solar cells. The passivation of silicon surface can be achieved in two ways: by field-effect passivation and/or by neutralization of interface states. In other words, the deposition should result in a high value of …
-
Structure and Motion of Charge Density Waves: An Nmr Study of Niobium-Selenide(3)
… wave (CDW) conductor, NbSe(,3), using aligned, multicrystalline samples, observing the NMR with and without current flow in the crystals.
-
Processing of high efficiency silicon solar cells
… by industrially feasible methods on the low cost multicrystalline silicon wafers are the main focus of this work. Solar cells made of single crystalline silicon are studied in order to reveal the capability of the fabrication process in scope of the conversion efficiency. The third cell technology …
-
Nanoimprint lithography for solar cell texturisation
… 100 um), opaque, brittle and also rough as-cut multicrystalline silicon substrates. <br>Two exemplary applications were investigated to verify the high potential of this novel texturing sequence based on NIL and plasma etching. These were the honeycomb texturing for multicrystalline silicon …
-
Development of high-efficiency solar cells on thin silicon through design optimization and defect passivation
… efficiencies of ~ 17% on low-cost, planar cast multicrystalline silicon. Solar cell efficiencies and lifetime enhancement in the top, middle, and bottom regions of cast multicrystalline silicon ingots were explained on the basis of impurities and defects generally found in those regions. In an …
-
Stress Diagnostics and Crack Detection in Full-Size Silicon Wafers Using Resonance Ultrasonic Vibrations
… breakage. Cracks diagnostics and reduction in multicrystalline silicon, for example, are ones of the most important issues in photovoltaics now. The industry is intent to improve the yield of solar cells fabrication. There is a number of techniques to measure residual stress in semiconductor …
-
Hydrogenation of Cast-Mono Silicon Solar Cells
… wafers using the cost effective process used for multicrystalline silicon wafers. This material has shown to have flaws in the ingot growth process which are mainly the propagation of dislocations during the casting of ingots. The crystallographic properties of these dislocations have been studied …
-
Influence of realistic operation conditions on silicon solar cells and energy yield
… temperature dependencies in mono- as well as multicrystalline silicon.<br>• Measurement approaches for spatially-resolved temperature-dependent characterization of silicon wafers and solar cells were developed. For silicon wafers the method is based on lifetime-calibrated photoluminescence …
Page 1 of 4