Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Multiple Reference Frame (MRF)"”.
-
Effects of blade configuration on flow distribution and power output of a zephyr vertical axis wind turbine.
… device. Major blade geometries were examined. A multiple reference frame (MRF) model capability of FLUENT was used to express the dimensionless form of power output of the wind turbine as a function of the wind freestream velocity and the rotor's rotational speed. The simulation results exhibit …
-
Computational Fluid Dynamics Simulations of Hydraulic Energy Absorber
… incorporated into single-phase calculations. The Multiple Reference Frame (MRF) Technique was used to model the interaction between the rotor and the stator. The calculations provided clearer details of the flow field without dramatically increasing the computational cost. It was found that …
-
Numerical simulations of the tip leakage vortex in a waterjet pump using a Reynolds averaged approach
… provided in Li et. al [1]. The studies include Multiple Reference Frame (MRF) approach for steady mode and Sliding Mesh (SM) for unsteady mode. The 𝑘 − 𝜔 𝑆𝑆𝑇 turbulence model is used as a baseline for both configurations although two additional variations will be tested: 𝑘 − 𝜔 𝑆𝑆𝑇 with Curvature …
-
Loads calculation for wind turbine design under the influence of rain
… Navier–Stokes (RANS) approach incorporated with multiple reference frame (MRF), discrete phase modelling (DPM) and wall–film model were used to investigate the aerodynamic behaviour of the selected geometries. The NACA 0012 and S809 aerofoils were used as the validation test cases, and then …
-
Investigation of Thrust Deduction on Azimuth Thrusters in Bollard Pull Condition using CFD
… thrusters and a combination of steady state Multiple Reference Frame (MRF) and transient Sliding Mesh Interface (SMI) modelling methodologies have been used. MRF has been proven to be inaccurate in behind condition and at low or high advance coefficients, as it usually results in relatively …
-
CFD Investigation on Sliding Mesh as a Method to Model Wheel Rotation - Implementation and Analysis on Different Rims
… is modelled as a moving wall for the tyres and a Multiple Reference Frame (MRF) region for the rims. The MRF approach, is a simplified method that aims to model wheel rotation while keeping the computational resources low, and thus it is the common practice among carmakers. However, it is an …
-
Renewable Energy Production by Solar Chimney: The Influence of Curved Guide Vanes on the Performance of a Solar Chimney Using CFD Simulation
… velocities, from 20 rpm to 120 rpm. The multiple reference frame (MRF) method is used in this part of the study to save computational resource. Thrust force, torque and power are extracted and analyzed. It is found that the maximum power of 82.2 kW is reached by the case of 30° guide vane …
-
Hydrodynamic CFD modeling of a pharmaceutical reactor vessel provided with a retreat-blade impeller under different baffling conditions
… in the CFD code to do so, including single reference frame (SRF), multiple reference frame (MRF), and sliding mesh (SM) models, also possibly combined with Volume of Fluid (VOF) models. In this study, a scaled-down version of a pharmaceutical glass-lined reactor vessel equipped with a …
-
Development of shape parameterization techniques, a flow solver and its adjoint, for optimization on GPUs: turbamachinery and external aerodynamics applications
… of building blocks of a shape optimization framework, namely a) the Computational Fluid Dynamics (CFD) analysis software, b) the optimization methods and c) the shape parameterization techniques are performed. These reduce the overall optimization cost and make them appropriate for use in …
-
Computational and experimental determination of the hydrodynamics in a stirred unbaffled vessel provided with angle-mounted axial impellers
… for different fluid rheologies. In all cases a multiple reference frame (MRF) computational approach was used and turbulence was modeled using the k-[epsilon] method. In addition, Particle Image Velocimetry (PIV) was used to experimentally determine the velocity flow field in water for some of …
-
Continuous adjoint methods for steady and unsteady turbulent flows with emphasis on the accuracy of sensitivity derivatives
… flows with rotor-stator interaction, using the Multiple-Reference-Frame (MRF) model, commonly referred to as the "frozen rotor" assumption. This adjoint formulation is presented for laminar flows, since its extension to turbulent ones is straightforward for any (already differentiated) …
-
Single and multiphase mixing in partially filled stirred vessels
… time. CFD predictions were obtained using a multiple reference frame (MRF) model coupled, when needed, with a Volume of Fluid (VOF) model, in order to study systems in which a vortex could be expected to form. In general, good agreements between the experimental data and the predicted results …