Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Multiple quantum well laser"”.
-
Gain Flattening Coatings for Improved Performance of Asymmetric Multiple Quantum Well Laser
<p> Compositionally asymmetric multiple quantum well (AMQW) lasers are used for the demonstration of the gain flattening coating functionality. The gain spectra of the lasers are extracted using a non-linear least square fitting method. An optimum facet reflectance spectrum is calculated for a …
-
Wide-Band and Scalable Equivalent Circuit Model for Multiple Quantum Well Laser Diodes
… building block-based scalable circuit model for multiple quantum well laser diodes. The wide-band multiple-resonance model expresses two important laser diode characteristics such as input reflection and electrical-to-optical transmission together. Additionally, it demonstrates good agreements …
-
Photonic integration in InGaAs/InGaAsP multiple-quantum well laser structures using quantum well intermixing
The damage introduced into an InGaAs/InGaAsP quantum well structure during CH4/H2 reactive ion etching (RIE) processes was measured, for plasma powers from 20 W to 100 W, using low temperature photoluminescence. The damage depth profile is estimated to be around 12 nm - 70 nm after annealing at 500 …
-
LOW-TEMPERATURE CHARACTERIZATION OF A 1.55-μm MULTIPLE-QUANTUM-WELL LASER DOWN TO 10 K
A ridge-waveguide 1.55-μm semiconductor laser with a multiple-quantum-well carrier confinement structure was characterized from room temperature down to 10 K. The temperature dependence of important laser parameters, such as threshold current, differential efficiency, emission wavelength, and …
-
Metal Organic Vapour Phase Epitaxy of Strained InP-Ga(x)In(1-x)As(y)P(1-y) Quantum Well Lasers
… into the application of strain to the wells and barriers of InP-Ga(x)In(1-x)As(y)P(1-y) based, multiple-quantum well (MQW) lasers. Material characterisation and device performance results are used to evaluate, both qualitatively and quantitatively, the effects of strain incorporation …
-
Integrated optical interferometric sensors on silicon and silicon cmos
The main objective of this research is to fabricate and characterize an optically integrated interferometric sensor on standard silicon and silicon CMOS circuitry. An optical sensor system of this nature would provide the high sensitivity and immunity to electromagnetic interference found in …
-
Carrier Escape from Semiconductor Quantum Wells
… of photogenerated carriers from semiconductor quantum wells is investigated theoretically and experimentally. Calculations of the tunnelling, thermionic emission, and thermally-assisted tunnelling escape times are given, where the thermionic emission process is split into low and high field …
-
Application of avalanche detectors in scientific and industrial measurement systems
… to set up a system with a GaAs/AlGaAs multiple quantum well laser diode with a spectral emission of 0.808 μm as transmitter and a NIR-HD SiPM with an enhanced efficiency for NIR photons recently developed at FBK as receiver. The evaluation was performed at high repetition rate (MHz …