Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"NASGRO"”.
-
Simulation of fatigue crack growth- a comparative study: A comparison between ANSYS SMART and NASGRO with emphasis on crack-front behaviour, transition modelling, and stress ratio effects
… software ANSYS and the semi-analytical tool NASGRO. The goal is to evaluate the strengths and the limitations of these tools in predicting fatigue crack growth and to provide recommendations for their effective use, with a focus on improving accuracy. The results show good agreement between …
-
A Finite Element Framework for Fretting Fatigue Analysis of Blended Edge Flat-Pad Contact
… SWT, process-volume averaging, and NASGRO are used to evaluate contact-edge damage, reference fatigue life, and crack-growth thresholds. The framework captures key loading trends and provides a basis for experimentally calibrated life prediction.
-
Potentials and limitations in finite element based crack propagation analysis using FRANC3D
… against handbook-type solutions, provided by NASGRO, and towards test results. Fatigue crack growth assessment was also performed for an embedded crack in a circular specimen—a load case not supported within NASGRO. A statistical evaluation of the finite element based approach gave similar …
-
Porovnání volně šiřitelných softwarů pro výpočet zbytkové únavové životnosti těles
… trhliny. V druhé části této práce jsou programy NASGRO a AFGROW popsány a porovnány, zejména je popsán princip zadávání jednotlivých parametrů do těchto programů. V poslední části této práce jsou vytvořeny příklady, které porovnávají zbytkové únavové životnost získané bez uvažování a s uvažováním …
-
Fretting behavior of AISI 301 stainless steel sheet in full hard condition
… in this way. Using the fracture mechanics based NASGRO model, an Equivalent Initial Flaw Size (EIFS) was used to quantify the level of fretting damage, thus separating the life of the component into crack nucleation and subsequent propagation. This method and data will allow engineers to design …
-
Vývoj metodiky pro stanovení délky únavové trhliny pomocí korelace digitálních obrazů
… fIPMf. Data získaná z VIM byla proložena rovnicí NASGRO a použita jako reference; výsledky fIPMf se odchylovaly přibližně o 20–30 %, což je srovnatelné s rozptylem mezi samotnými datovými sadami VIM. Pro použití v reálném čase nabízí fIPMf stejnou frekvenci zpracování dat jako STM, což je více než …