Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"NBCC 2010"”.
-
Nonstructural component field testing method for the evaluation of seismic demand incorporating floor response spectrum
… were then compared with those obtained using the NBCC 2010 code equation to demonstrate the effectiveness of this method. Results from the case study provided evidence that the proposed method is overall a simple and effective tool for diagnosing the in-service modal properties of a NSC. The …
-
Simplified Seismic Design for Mid-Rise Buildings with Vertical Combination of Framing Systems
… Society of Civil Engineers 7 (ASCE 7) (ASCE, 2010) at first. Then, by considering the difference in seismic design provisions between ASCE 7 and the Canadian code National Building Code of Canada 2010 (NBCC 2010) (NBCC, 2010), several modifications are made on the simplified approaches based …
-
Seismic assessment of basement walls in British Columbia
… by the National Building Code of Canada (NBCC, 2010). Because there is a little evidence of any significant damage to basement walls during major earthquakes, the Structural Engineers Association of British Columbia (SEABC) became concerned about designing the walls under the code-mandated …
-
Initial Development and Validation of the Rural Competency Scale
… areas (National Board for Certified Counselors [NBCC], 2010) provide evidence of an increased focus on appropriate services for rural individuals. Therefore, the purpose of this study is the development and validation of the Rural Competency Scale (RCS), a scale designed to measure counselors' …
-
Wind pressures on flat roof edges and corners of large low buildings
… of the current provisions of ASCE 7-10 and NBCC 2010 on building geometries of large roofs and low height may lead to considerably conservative and uneconomic roof design. An exception for very long low buildings, as far as the determination of the sizes of roof edge and corner zones is …
-
PART TEN: A Case for Increased Regulation of Relocatable Buildings in the Province of Ontario
… and the National Building Code of Canada (NBCC) 2010 edition5. Amendments amassed from existing precedent codes and model voluntary standards, intend to increase and improve the baseline expectations and requirements of building construction in this category with the intent of directly …
-
Seismic Performance of Perforated Steel Plate Shear Walls Designed According to Canadian Seismic Provisions
… designed according to the seismic provisions in NBCC 2010 and CSA/CAN S16-09. Nonlinear time history (NTH) analysis was conducted using detailed finite element (FE) modeling techniques. The finite element (FE) model developed was validated with two experiments results for quasi- static monotonic …
-
Wind-Induced Torsional Loads on Low- and Medium-Rise Buildings
… American code provisions. The study found that NBCC 2010 underestimates torsion on low-rise buildings significantly, while discrepancies were found for medium-rise buildings. In addition, wind load combinations for low- and medium-rise buildings were studied. For flat-roofed buildings, it was …
-
NUMERICAL MODELING AND DESIGN OF LOW-RISE CONCENTRICALLY BRACED FRAMES WITH DOUBLE-PIN DISSIPATIVE CONNECTIONS
… design was conducted according to S16-2009 and NBCC 2010 provisions. The seismic response was studied under two sets of ground motions that are representative for Victoria, BC: crustal and subduction events. The results have shown that forces generated in structural members were reduced due to …
-
Numerical Simulations of Steel Frames Equipped with Friction-Damped Diagonal-Bracing Devices
… moment resisting frame structure accordingly to NBCC 2010 and CSA/S16-2009. The studied buildings are located in Montreal and are subjected to 15 simulated and historical ground motions scaled to match the uniform hazard spectrum. Herein, beams and columns were defined as nonlinear force-based …
-
Seismic Fragility Assessment of Pre- and Post-Retrofit 1980s Concentrically Braced Frame Office Buildings in Moderate Seismic Zones
… 1980, both the National Building code of Canada (NBCC) and Steel design standard (CSA/S16) have continually evolved, while lower interest was allocated in the development of guidelines for seismic assessment and retrofit of existing buildings located in seismic zones. This study focuses on the …
-
An Improved Static Seismic Design Method for Podium Structures with Vertical Irregularity of Mass and Stiffness
… loads appropriate to such as structure, both for NBCC 2010 (National Research Council of Canada (NRCC), 2010). and ASCE 7-10 (American Society of Civil Engineers (ASCE), 2010). Based on the work of Yuan & Xu, the current study aims to both improve the ease of use and the scope of these methods. …