Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 73 for “"Nanoindentation tests"”.
-
Characterization of the mechanical properties of visco-elastic and visco-elastic-plastic materials by nanoindentation tests
… substrate was investigated to study the nanoindentation of cells. It was shown that the cell membrane cannot be neglected in interpreting the indentation data when the size of the indenter was comparable with a well defined length scale.
-
Synthesis, Microstructure, and Mechanical Behavior of Fe-Cu Composites
… good agreement between two results. From the nanoindentation tests, the hardness values of the ball-milled Fe powders were increased from 3.5 to 10.5 GPa as the milling time increased and the grain size decreased.</p> <p>The mechanical behaviors of the coarse-grained (Regular) pure Fe, pure …
-
Mechanical behavior of Ti-5553 alloy. Modeling of representative cells.
… in the previous parts.The experimental tensile tests performed at different strain rates have demonstrated the necessity of using an elastic-viscous-plastic constitutive law. Guided by macroscopic (tensile and simple shear) experiments, a microscopic plasticity-based constitutive law was chosen …
-
Energetics and Kinetics of Dislocation Initiation in the Stressed Volume at Small Scales
<p>Instrumented nanoindentation techniques have been widely used in characterizing mechanical behavior of materials in small length scales. For defect-free single crystals under nanoindentation, the onset of elastic-plastic transition is often shown by a sudden displacement burst in the measured …
-
An Experimental Multi-scale Assessment of Mechanical Properties of Organic-rich Mudrocks, and Impact of the Variability of Their Mineralogical and Organic Components in Their Mechanical Analysis
… properties of organic-rich mudrocks. I used nanoindentation tests to quantify the variability in elastic properties of individual rock components, caused by differences in their spatial distribution, size, and rock fabric within the formation. I reported a variability of 25% in Young’s moduli …
-
The Application Of Nanoindentation Technology With Simulation On The Micromechanical Properties Of Bakken Formation
… oil production since 2000. The geomechanics tests need to be used in optimization of hydraulic design and mechanical properties are important factors that control or influence fracture geometry. Conventionally, in order to know Young's modulus, the industry either uses cores to carry out …
-
Synthesis and Mechanical Properties of Na0.7Coo2
… are reported for the first time based on nanoindentation tests. The correlation between the mechanical properties and the structure of the nanolayered materials is reported. A deformation mechanism for nanolayers is suggested based on layer sliding. Aging problems associated with this …
-
Effect of diet properties on the degradation of cartilage in mandibular symphysis
… the mandibular symphysis fibrocartilage. The nanoindentation method using a diamond spherical tip was used. Mandibular symphysis with fibrocartilage pad from rabbits given foods with different mechanical properties, i.e. soft-use diet, medium-use (control) diet and hard-use diet, have been …
-
Mechanical Behaviors of Crystalline-Amorphous Nanolaminates
… multilayered thin films. Systematic nanoindentation tests reveal the unusual size dependent strengthening mechanisms. Furthermore, tensile tests of crystalline/amorphous multilayers on polymer substrate demonstrate that ductile dimples can be achieved in metallic glass after fracture …
-
NOVEL SYNTHESIS AND CHARACTERIZATION OF INORGANIC FULLERENE TYPE WS2 AND GRAPHENE HYBRIDS
… components were included in epoxy matrices for nanoindentation tests. Results showed the Youngs modulus (normalized for bare epoxy) increased 12.23%, while hardness increased 27.87% through inclusion of 1% wt loadings of graphene/IF-WS2. These results were compared to carbon nanofibers/IF-WS2 …
-
Micro-Scale Characterization of Quartzitic and Carbonate Sand Grains Using Nanoindentation
… this challenge. Experimental studies consist of nanoindentation tests performed on 17 different sands; 7 quartzitic and 10 carbonate sand samples. Mechanical properties of individual sand grains with different mineralogies are determined using nanoindentation. A force is applied by the …
-
Effects of Angular Misalignment on Material Properties' Characterization by Cylindrical Flat Tip Indentation
… modern applications of depth-sensing indentation tests. Nanoindentation using a cylindrical flat tip indenter comes with some unique features which makes it a reliable source to find material’s yield strength as well as other mechanical properties. This work presents a quantitative investigation …
-
Effects of Proton Irradiation on the Mechanical and Physical Properties of Carbon Nanotube Based Composites
… and hardness, was probed using instrumented nanoindentation tests. The proton stopping power of the epoxy was shown to be unchanged by the addition of CNTs, which is a promising result since the hardness of the samples was shown to be increased by addition of CNTs. Unfortunately, however, the …
-
Αριθμητική μεθοδολογία πολλαπλών κλιμάκων ανάλυσης για την παραμετρική εκτίμηση των μηχανικών ιδιοτήτων πολυμερών και σύνθετων υλικών ενισχυμένων με νανοσωλήνες άνθρακα
… to macroscale and mechanical, microscopy and nanoindentation tests were conducted to obtain input data and verifying the models.Originally, a parametric study was conducted using a representative volume element (RVE) model of a single straight nanotube surrounded by the interphase and the …
-
Improving the Accuracy, Reliability, and Throughput of Nanoindentation Hardness and Modulus
Instrumented nanoindentation is a form of load and depth sensing indentation that characterizes material properties on the micro- and nanoscale. This form of indentation is widely used for its ability to measure a variety of material properties on very small scales in a high-throughput manner …
-
Characterizing the mechanical behavior of single and polycrystalline silicon carbide using nanoindentation.
… for toughness measurement is examined using nanoindentation tests with different indenters (spherical, pyramidal). Pyramidal indenters with various centerline to face angles are used to produce a wide range of effective strains in the single and polycrystalline SiC. Crystal plasticity …
-
Effect of chromium on the microstructure and mechanical properties of amorphous carbon coatings
… modulus of the coatings were analysed with nanoindentation tests using both a Hysitron Triboscope and a UMIS 2000 nanoindentation system. The latter indenter was used to study the deformation behaviour of the coating-substrate composites, with a maximum applied load up to 500mN. The indented …
-
Fatigue Study of Pipeline Steels
… wt.%)], were tested. Vickers hardness and nanoindentation tests were used to obtain the hardness and elastic modulus. Compact-tension (CT) specimens were employed for fatigue experiments. Different frequencies (10 Hz, 1 Hz, and 0.1 Hz) and different stress ratios [0.1 and 0.5, stress ratio …
-
Effect of moderate magnetic annealing on the microstructure and mechanical behavior of a structural epoxy
… was investigated using the instrumented nanoindentation. Improvements in both Youngs modulus and hardness by up to 6.6% were observed in the transverse direction of the magnetic field. However, evident by the measured elastic and plastic work under nanoindentation, it was observed that …
-
New Frontiers In Synthesis Of High-Entropy Materials Enabled By Microwave-Induced Plasma
… diborides, as confirmed by Vickers and nanoindentation tests, showing significantly higher values than those reported for similar compositions produced by alternative methods. The dissertation also explores the effects of reactive versus inert plasma environments, focusing on the use of …
Page 1 of 4