Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 110 for “"Naphtha"”.

  1. Modeling and optimization of a catalytic naphtha reformer

    Catalytic naphtha reforming is one of the key processes in petroleum refining, converting gasoline boiling range low-octane hydrocarbons to high-octane compounds which can be blended into gasoline. Other valuable byproducts include hydrogen and cracked light gases. Modeling of a typical …

    ttu Repository record for Modeling and optimization of a catalytic naphtha reformer (opens in a new tab)

  2. Advanced cracking catalysts for the conversion of naphtha into light olefins

    … high molecular weight hydrocarbons present in naphtha into the desired compounds.</p> <p>ZSM-5 is the most efficient catalyst for naphtha cracking to light olefins. Our initial studies reveal that, for these catalytic processes, the SiO2/Al2O3 ratio is not perhaps the primary criterion for the …

    oxford Repository record for Advanced cracking catalysts for the conversion of naphtha into light olefins (opens in a new tab)

  3. An Analysis of the Naphtha Cut of Cooke County, Texas, Crude Oil

    This study attempted to determine hydrocarbons in the crude oil by comparing the results obtained using the two methods of analysis: chemical analysis and Kurtz-Headington analysis. The Kurtz-Headington analysis was found to be adequate to determine hydrocarbons in the crude oil.

    unt Repository record for An Analysis of the Naphtha Cut of Cooke County, Texas, Crude Oil (opens in a new tab)

  4. The Effect of Various Waxes on the Rate of Evaporation of Light Naphtha

    … solvent. Experiments were performed, using light naphtha as the solvent and Paraffin, Japan, Carnauba, Candelilla, Ozokerite, Montan, and Bees waxes as solutes. These waxes were selected since they are the waxes most commonly used in the manufacture of floor waxes and work of the kind presented in …

    marquette Repository record for The Effect of Various Waxes on the Rate of Evaporation of Light Naphtha (opens in a new tab)

  5. Using fluorescence spectroscopy to measure the biodegradation of naphtha in Athabasca oil sands tailings ponds

    … and cost-effective method to measure naphtha biodegradation in Athabasca Oil Sands Region mature fine tailings (MFT) samples. Diverse microbial communities in tailings ponds can readily utilize certain fractions of the available naphtha and support methanogenesis (Holowenko et al. …

    queens Repository record for Using fluorescence spectroscopy to measure the biodegradation of naphtha in Athabasca oil sands tailings ponds (opens in a new tab)

  6. ANALYSIS OF INJECTION PARAMETERS INFLUENCING GASOLINE DIRECT INJECTION COMPRESSION IGNITION (GDICI) ENGINE OPERATION IN LTC USING NAPHTHA

    … ignition engine combustion fueled with heavy naphtha, light naphtha, and PRF50 in low-temperature combustion (LTC) regime. At constant fueling, combustion characteristics are investigated as a function of injection timing and injection pressure. Further, operating limits of fuel confined by …

    mtu Repository record for ANALYSIS OF INJECTION PARAMETERS INFLUENCING GASOLINE DIRECT INJECTION COMPRESSION IGNITION (GDICI) ENGINE OPERATION IN LTC USING NAPHTHA (opens in a new tab)

  7. Impact of conjugated olefins on nickel-molybdenum-sulphide supported on gamma-alumina catalyst deactivation and fouling of naphtha hydrotreaters

    … lead to catalyst deactivation and fouling in naphtha hydrotreater reactors using a commercial Ni-Mo-S/γ-Al₂O₃ catalyst. The reactions were performed in a micro-scale fixed bed reactor system operated at 150-250°C, 3-4 MPa H₂, LHSV of 1-8 hr-¹ and a H₂/feed ratio of 392-1200 standard mL/mL. …

    ubc Repository record for Impact of conjugated olefins on nickel-molybdenum-sulphide supported on gamma-alumina catalyst deactivation and fouling of naphtha hydrotreaters (opens in a new tab) Download PDF for Impact of conjugated olefins on nickel-molybdenum-sulphide supported on gamma-alumina catalyst deactivation and fouling of naphtha hydrotreaters (opens in a new tab)

  8. Dimerization of naphtha-range Fischer-Tropsch olefins into diesel-range products over zeolite H-ZSM-5 and amorphous silica-alumina

    … 1-octene (as model compounds for Fischer-Tropsch naphtha-range olefins) into diesel-range olefins was carried out in a tubular, continuous flow fixed-bed reactor, in the liquid phase, over zeolite H-ZSM-5 and an amorphous silica-alumina (ASA) catalyst. Both catalysts were in the form of extrudates.

    cape-town Repository record for Dimerization of naphtha-range Fischer-Tropsch olefins into diesel-range products over zeolite H-ZSM-5 and amorphous silica-alumina (opens in a new tab)

  9. Investigation of Mass Transfer Effects on Naphtha Surrogates Partitioning from Bitumen to Aqueous Phases in Athabascan Oil Sands Tailings Ponds

    … activity, such as the biodegradation of diluent naphtha. These greenhouse gases (GHGs) are of substantial environmental concern. A better understanding of the mechanisms affecting their emission rates could be used to mitigate these GHG emissions while balancing other environmental concerns …

    queens Repository record for Investigation of Mass Transfer Effects on Naphtha Surrogates Partitioning from Bitumen to Aqueous Phases in Athabascan Oil Sands Tailings Ponds (opens in a new tab)

  10. Effect of Terminal Electron Acceptors on Greenhouse Gas Emissions in Oil Sands Tailings

    … archaea, oxidize petroleum hydrocarbons (such as naphtha) using acetic acid or CO2 as a terminal electron acceptor (TEA) resulted in methane (greenhouse gas) efflux from OSTPs. Some studies estimated the current methane emissions to be up to 43 million liters/day. GHG evolution is stimulated by …

    queens Repository record for Effect of Terminal Electron Acceptors on Greenhouse Gas Emissions in Oil Sands Tailings (opens in a new tab)

  11. Particulate matter characterization and control in premixed compression ignition engines

    … state. Hot EGR was introduced for fuels, G75 and naphtha and it significantly reduced the total particle number and mass concentrations by about 99% and the mean diameter to a smaller size ~ 10 nm compared to diesel fuel. Single injection reduced the total particle numbers’ concentration and smoke …

    birmingham Download PDF for Particulate matter characterization and control in premixed compression ignition engines (opens in a new tab)

  12. Catalytic Aromatization of Paraffin-Rich Oil under Methane Environment

    Naphtha fractions obtained from petroleum refinement contain an abundant mixture of hydrocarbons including paraffins, naphthenes, aromatics, and even olefins. n-paraffins are the largest constituents of such oils and are the most undesirable because of their poor octane values and low economic …

    calgary Repository record for Catalytic Aromatization of Paraffin-Rich Oil under Methane Environment (opens in a new tab)

  13. Simulation and optimization of a hydrogen plant with ASPEN PLUS

    … next development was a process to reform light naphtha, a distillate similar in many ways to hydropetrol. Naphtha became available as a raw material for making hydrogen for an increasing number of petroleum refineries in the world. Technical problems of removing of sulfur from the feedstocks and …

    missouri Repository record for Simulation and optimization of a hydrogen plant with ASPEN PLUS (opens in a new tab)

  14. Experimental investigation of a premixed compression ignition engine

    … Dieseline (mixture of diesel-gasoline) and naphtha, were investigated in a light-duty multi-cylinder CI-engine focusing mainly on reducing emissions while maintaining or improving the brake-thermal-efficiency. Different fuel-injection and intake/exhaust handling strategies were investigated …

    birmingham Download PDF for Experimental investigation of a premixed compression ignition engine (opens in a new tab)

Page 1 of 6