Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Nb content"”.

  1. Structural properties, deformation behavior and thermal stability of martensitic Ti-Nb alloys

    Ti-Nb alloys are characterized by a diverse metallurgy which allows obtaining a wide palette of microstructural configurations and physical properties via careful selection of chemical composition, heat treatment and mechanical processing routes. The present work aims to expand the current state of …

    qucosa-diss

  2. Microstructure and compressive strength of as-cast and aged Nb-rich Nb-Al-Ti intermetallics

    <p>As-cast Nb-Al-Ti alloys containing 15 at.% A1 and 10, 25 and 40 at.% Ti were tested in compression at 298, 673, 873 and 1173 K (25, 400, 600 and 900°C) at strain rates from 10<sup>-5</sup> to 5x10<sup>-2</sup> s<sup>-1</sup> to a strain of 5%. The yield strength decreased with increasing …

    utk-theses Repository record for Microstructure and compressive strength of as-cast and aged Nb-rich Nb-Al-Ti intermetallics (opens in a new tab)

  3. NbC-containing high carbon steel grinding media development

    … on the performance of grinding media via Nb alloying. If beneficial to wear performance, a cost reduction in grinding media use for mining applications may result. Experimental laboratory-prepared heats were produced via vacuum induction melting industrial bar stock with a base composition …

    colo-mines Repository record for NbC-containing high carbon steel grinding media development (opens in a new tab)

  4. Structural and Transport Properties of Epitaxial Niobium-Doped BaTiO3 Films

    <p> Highly orientated BaTi1-xNbx03 thin films, spanning the entire range of x, have been successfully deposited on (001) MgAl20 4 substrates by the pulsed laser deposition (PLD) method. The structure of the films is characterized with a range of techniques. It is found that increasing x gives rise …

    mcmaster Repository record for Structural and Transport Properties of Epitaxial Niobium-Doped BaTiO3 Films (opens in a new tab)

  5. Double-twist torsion testing to assess microstructural evolution in microalloyed steels

    … torsion test was applied to a 0.06C-0.06Nb-0.01Ti-0.005N (wt pct) nominal base composition and to five additional microalloyed steels with varying Nb, Ti, V, C, and N contents using a Gleeble® 3500. All alloys contained Nb additions between 0.03 and 0.06 wt pct. Partial softening occurred …

    colo-mines Repository record for Double-twist torsion testing to assess microstructural evolution in microalloyed steels (opens in a new tab)

  6. Grain structure development during casting, reheating and deformation of Nb-microalloyed steel

    … looks at the effect of micro segregation of Nb, generated from the continuous casting on grain structure development during reheating and deformation. The amount of segregated material present in the microstructure has been quantified in the as-cast condition and that has been used to model …

    birmingham Download PDF for Grain structure development during casting, reheating and deformation of Nb-microalloyed steel (opens in a new tab)

  7. Formation of ZrCu-based Bulk Metallic Glasses and Composites with Enhanced Glass Forming Ability and Mechanical Properties

    … are Zr-Cu-Al-Ag, Zr-Cu-Al-Ag-Ti and Zr-Cu-Al-Nb. All these alloys were prepared and characterised in terms of thermal behaviour, phase formation and mechanical properties. The Zr50Cu45-xAl5Agx (x = 0, 0.5, 1 and 2.0 at. %) alloy systems were designed based on the Zr-Cu-Al BMGMC system. The …

    whiterose Download PDF for Formation of ZrCu-based Bulk Metallic Glasses and Composites with Enhanced Glass Forming Ability and Mechanical Properties (opens in a new tab)

  8. Effect of NB concentration on the y-̊--> a" martensitic transformation in U+NB alloys

    <p>The martensitic reaction in five Uranium-Nb alloys (14.5,15.0, 15.5, 15.5, and 16.0 at<i>%</i> Nb) was studied by means of x-ray diffraction experiments in order to establish the temperature range of this reaction. The experiments were carried out in a cryostat on a diffractometer in which …

    ut-knoxville Repository record for Effect of NB concentration on the y-̊--> a" martensitic transformation in U+NB alloys (opens in a new tab)

  9. Austenite grain growth behaviour of HSLA steel during reheating treatment

    … between 950 ºC and 1300 ºC of as-cast Al-Nb steel (containing 0.019 wt% Nb and 0.057 wt% Al) and rolled Nb-containing steel (containing 0.028 wt% Nb and 0.031 wt% Al) have been investigated. In particular the role of microalloying element segregation during casting and, hence the spatial …

    birmingham Download PDF for Austenite grain growth behaviour of HSLA steel during reheating treatment (opens in a new tab)

  10. Phase Engineering of High-entropy Alloys through Transformations

    … phase transformations. Firstly, TiZrHfNbx refractory HEAs (RHEAs) are studied to investigate their phase transformation behaviors under uniaxial loading, which can be categorized as strain-controlled phase transformations. With different Nb contents, these metastable RHEAs are expected …

    utk-theses Repository record for Phase Engineering of High-entropy Alloys through Transformations (opens in a new tab)

  11. Estimating the thickness of an ultrahigh-pressure (UHP) terrane: insights from phase equilibria modelling and Zr-in-rutile thermometry, Dulan area, North Qaidam terrane, China

    … can modify the original rutile´s Zr and Nb content, and therefore the obtained Zr-in-rutile temperatures. Phase equilibria modelling and Zr-in-rutile thermometry of four eclogites indicate they reached peak metamorphic iv conditions at ~26-32 kbar and ~630-690 °C. Coupling garnet mode …

    central-wash Repository record for Estimating the thickness of an ultrahigh-pressure (UHP) terrane: insights from phase equilibria modelling and Zr-in-rutile thermometry, Dulan area, North Qaidam terrane, China (opens in a new tab)

  12. TiNbOx microscaffolds for studying early bone cell-material interactions in the microscale

    … out of an implant material (β-stabilized Ti-45Nb (wt%)). It is demonstrated that the bulk material composition, which is consisting of a high Nb content, can be closely transferred to transparent thin films by using reactive sputtering. These films then self-assemble into tubular microscaffolds …

    qucosa-diss

  13. A-Site Compensated Donor-Doped SrTiO3

    … defect dipole research. Samples of Sr1-x/2Ti1-xNbxO3, Sr0.9Ti1-xNbxO3, SrTi1-xNbxO3, SrTi1-xMnxO3 and SrTi1-xCoxO3 were produced via the mixed oxide solid state reaction technique. Samples were characterised using X-ray diffraction and scanning electron microscopy. Following this electrical …

    whiterose Download PDF for A-Site Compensated Donor-Doped SrTiO3 (opens in a new tab)

  14. Study of the Microstructural Refinement of a High Niobium Microalloyed Steel Under Controlled Hot Deformation

    … decade. The resulting alloy is based on a high Nb content (~0.1 wt%) which allows for controlled hot rolling due to its ability to retard the recrystallisation of the deformed austenite. The HTP steel alloy enable the possibility to achieve highly refined microstructures with superior strength …

    whiterose Download PDF for Study of the Microstructural Refinement of a High Niobium Microalloyed Steel Under Controlled Hot Deformation (opens in a new tab)

  15. Development of high performance P-type sodium cobaltate and N-type strontium titanate thermoelectric materials

    … amount of dopants (Y and La), the effects of Sr content on the phase composition, microstructure, and thermoelectric properties of SrxY0.04TiO3 (0.92 ≤ x ≤ 1) and SrxLa0.12TiO3 (0.82 ≤ x ≤ 0.90) were studied. Finally, the effects of Y and Nb co-doping on the thermoelectric properties of …

    unsw Repository record for Development of high performance P-type sodium cobaltate and N-type strontium titanate thermoelectric materials (opens in a new tab)

  16. Defect chemistry and charge transport in niobium-doped titanium dioxide

    … made a comprehensive assessment of the effect of Nb doping on various charge-transfer related properties of TiO2. Of particular focus, the electrical properties of Nb-doped TiO2 (0.65 at %) have been investigated using the simultaneous measurement of electrical conductivity and thermoelectric …

    unsw Repository record for Defect chemistry and charge transport in niobium-doped titanium dioxide (opens in a new tab)

  17. Additive Manufacturing of Ti–Nb Alloys: Thermokinetics-Driven Microstructural Evolution and Structure–Property Relationships

    … thesis investigates the fabrication of Ti-25Nb, Ti-25Nb-5Sn, and Ti-45Nb (wt.%) alloys from blended elemental powders, addressing the associated processing challenges and examining how process-induced spatial and temporal variations drive microstructural and phase evolution, ultimately …

    unt Repository record for Additive Manufacturing of Ti–Nb Alloys: Thermokinetics-Driven Microstructural Evolution and Structure–Property Relationships (opens in a new tab)

  18. Influence of Fine-scale Niobium Carbonitride Precipitates on Hydrogen-Induced Cracking of X70 Pipeline Steel

    … on whether or not fine-scale niobium carbide (NbC), nitride (NbN) and carbonitride (Nb(C,N)) precipitates can behave as effective hydrogen traps has yet to be established. The H-trapping capacity of Nb precipitates in a Fe-C-Mn-Nb model steel was investigated with the goal of minimizing …

    mcmaster Repository record for Influence of Fine-scale Niobium Carbonitride Precipitates on Hydrogen-Induced Cracking of X70 Pipeline Steel (opens in a new tab)

  19. Flow stress, restoration and precipitation behavior, and modeling for two Ti-Nb stabilized IF steels in the ferrite region

    … behavior have been investigated on two Ti-Nb stabilized IF steels in this study. This was accomplished with the aid of axisymmetric compression tests, torsional rolling simulation tests, TEM observation on precipitation and substructures, and Kikuchi pattern analysis. Experimental tests …

    ubc Repository record for Flow stress, restoration and precipitation behavior, and modeling for two Ti-Nb stabilized IF steels in the ferrite region (opens in a new tab) Download PDF for Flow stress, restoration and precipitation behavior, and modeling for two Ti-Nb stabilized IF steels in the ferrite region (opens in a new tab)

  20. Selective laser melting of glass-forming alloys

    … enthalpies, which can reveal the free volume content and average atomic packing density in the additively manufactured BMGs are much higher than that in the as-cast samples, indicating an insufficient duration for structural relaxation. The nanoindentation tests indicate that the structure of …

    qucosa-diss