Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Nb3Sn"”.
-
Mechanical characterisation of Nb3Sn Rutherford cable stacks
Nb3Sn Rutherford cables are used in CERN’s superconducting 11 T dipole and MQXF quadrupole magnets, which are proposed for the instantaneous luminosity (rate of particle collisions) upgrade of the Large Hadron Collider (LHC) by a factor of five to a High Luminosity-Large Hadron Collider (HL-LHC). …
-
Understanding And Overcoming Limitation Mechanisms In Nb3Sn Superconducting Rf Cavities
Nb3 Sn has the potential to significantly improve cryogenic efficiency and maximum fields in superconducting RF cavities, structures that impart energy to charged particle beams in large accelerators. Previous experiments demonstrated excellent cryogenic efficiency at small accelerating fields, …
-
The development of in situ formed Nb3Sn-Cu superconducting wire
<p>Flux pinning and the optimization of J(,c) properties have been studied for in situ prepared Nb(,3)Sn-Cu superconducting composite wire. The pinning force density is found to be a universal function of magnetic fields as F(,p) (PROPORTIONAL) h(' 1/2)(1-h)('2) over the full range of reduced field …
-
Electronic structure and Fermi surface properties of Nb3Sn and Nb3Sb
Contains fulltext : mmubn000001_026798522.pdf (Publisher’s version ) (Open Access)
-
Design and fabrication of a stress-managed Nb3Sn wind and react dipole
A new approach to high-field dipole design is being developed at Texas A&M University. The goal of the development is to facilitate the use of high-field conductors (Nb3 and Bi-2212) and to manage Lorentz stress and magnetization so that field strength can be extended to 25 Tesla. The new design …
-
The analysis of tin diffusion steps in the preparation of Nb3Sn-Cu superconductors
<p>A three stage heat transfer is employed to eliminate the tin ball-up problem. A void nucleation problem is encountered in stage I and it can be reduced by minimizing time at stage I. Therefore, T(,d), the tin depletion time, is important in order to minimize time at stage I. Experiments on stage …
-
Growth And Properties Of Vapor Diffused Nb3Sn Coating For Superconducting Radiofrequency Accelerator Cavity Applications
… for higher-performing alternative materials. Nb3Sn (Tc ~ 18.3 K and Hsh ~ 425 mT) is the front runner. The tin vapor diffusion process is currently the technique of choice to produce promising Nb3Sn-coated cavities. Understanding Nb3Sn nucleation and growth in this process is essential to …
-
Atom probe tomography analysis of Nb3Sn superconducting wires for fusion reactor and particle accelerator applications
<p>First discovered in 1954, Nb<sub>3</sub>Sn is a low temperature superconductor, which has had a resurgence in interest in recent years. Multiple projects, such as the Hi-Lumi upgrade to the Large Hadron Collider and the fusion reactor ITER have used Nb<sub>3</sub>Sn superconducting magnets, and …
-
New Insights into the Limitations on the Efficiency and Achievable Gradients in Nb3Sn SRF Cavities
The A15 superconductor Nb3Sn has shown great promise to replace niobium as the material of choice for the construction of superconducting radio-frequency (SRF) accelerator cavities. It promises, at least on paper, greater efficiency and higher accelerating gradients, with the potential to enable …
-
Finite element modelling and experimental measurement of the mechanical properties of Nb3Sn multi-filamentary composite superconducting wires
… and high field superconducting magnets are Nb3Sn multi-tilamentary composite wires. The mechanical properties of these wires can have a strong bearing on the capabilities of the magnets because their superconducting properties are strongly dependent on the strain state within the Nb3Sn. The …
-
Fabrication of Nb<sub>3</sub>Sn by Magnetron Sputtering for Superconducting Radiofrequency Application
… Tc ~ 18.3 K, superheating field Hsh~ 400 mT), Nb3Sn is considered a potential candidate in SRF technology. Magnetron sputtering is a promising deposition method to fabricate Nb3Sn thin films inside SRF cavities. Superconducting Nb3Sn films were fabricated on Nb and sapphire substrates by …
-
Nb<sub>3</sub>Sn Coating of Twin Axis Cavity and Other Complex SRF Cavity Structures
… SRF research. Within the potential substances, Nb3Sn has shown higher critical temperature than niobium. Here the tin vapor diffusion method is used as the preferred technique to coat niobium cavities. So far, only elliptical cavities have been coated with Nb3Sn and this technique has not yet …
-
Advancing the Maximum Accelerating Gradient of Niobium-3 Tin Superconducting Radiofrequency Accelerator Cavities: RF Measurements, Dynamic Temperature Mapping, and Material Growth
Niobium-3 Tin (Nb3Sn) is the most promising alternative material for Superconducting Radiofrequency (SRF) particle accelerator cavities. Current SRF accelerators use superconducting niobium accelerator cavities, which are nearing their theoretical limits of performance. Nb3Sn promises increased …
-
Design and Commissioning of a Compact Conduction-Cooled SRF Cryomodule
… major improvements in both the RF performance of Nb3Sn cavities and the cooling capacities of 4 K cryocoolers. In the last few years in particular, these developments have reached a critical crossroads where a single cryocooler can provide enough cooling to operate a single- or even multicell 1.3 …
-
Computational Modeling of Magnetic Field Interaction with Superconductors Under High-Field and High-Dissipation Conditions: A TDGL Approach Applied to Nb and Nb3Sn
… such as niobium (Nb) and triniobium-tin (Nb3Sn), and the defects and surface features present within the material. This dissertation presents a computational study focused on understanding the behavior of SRF cavities, using a sample-specific time-dependent Ginzburg-Landau (TDGL) framework …
-
Multi-Technique Characterization of Superconducting Materials for Particle Accelerator Applications
… thin films with higher Tc such as Nb3Sn. The main goal of this work is to use different techniques to better understand each aspect of the complex loss mechanism in superconductors to further improve the already highly efficient SRF cavities. Nitrogen doping applied to a Nb SRF …
-
Development Of A High Throughput Facility For The RF Characterisation Of Superconducting Thin Films
… and the use of alternative materials, such as Nb3Sn, NbTiN, V3Si, offer the potential for higher temperature operation and accelerating gradients that exceed Nb. The development of thin film coatings on full-sized cavities is expensive and time-consuming. Therefore, optimising deposition …
-
Vortex lattice in conventional and unconventional superconductors
… conventionally. The second material studied is Nb3Sn, widely used to produce large magnetic fields in various devices such as MRI machines. We investigate the superconducting state of several polycrystalline samples with different tin concentrations, as recent evidence point towards a lack of …
-
Light scattering studies of phonon anomalies and superconductivity in A15 compounds
… mean free path. Raman scattering measurements on Nb3Sn, V3Si, and Niobium show for the first time new peaks in the superconduct1ng state close in energy to the superconducting gap 28. These are attributed to direct electronic Raman scattering by pairs of superconducting quasiparticles. A theory is …
-
Intense terahertz light-quantum quench and control of superconductivity
… control of superconductivity. BCS superconductor Nb3Sn and iron based superconductor Ba(Fe1-xCox)2As2 are studied by intense THz/optical pump/-weak THz probe ultrafast spectroscopy. I design and develop the experiment setup that reaches the strongest THz pump reported so far in similar tabletop …
Page 1 of 2