Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Net Section"”.
-
Net section rupture in tension members with connection eccentricity
… and double angles, single channels and similar sections are frequently used for lateral bracing and as truss elements. Such members will normally have eccentric connections, and it is often permitted, by current design specifications, to neglect this eccentricity in the design of the member. In …
-
Combined Tension and Bending Loading in Bottom Chord Splice Joints of Metal-Plate-Connected Wood Trusses
… of a design procedure for determining the steel net-section strength of bottom chord splice joints of MPC wood trusses. Several common wood truss splice joint configurations were tested at varying levels of combined tension and bending loading. The joint configurations were 2x4 lumber with …
-
The effects of water displacing corrosion preventatives on the fatigue behaviour of mechanically fastened aluminium joints
… lap joint are investigated. Analytical models of net-section and gross-section failure modes are proposed to describe these mechanisms. The effects of lamping force, interference fit, maximum axial load and WDCP on fatigue performance of the joint are included in the models. The effect of WDCP is …
-
Response of multiple fastener composite joints: numerical and experimental results
… predictions was found to be excellent around the net-section region. Although predictions for other strains were not as good, they were within the range of experimental data. Distribution of contact stresses between the pins and the hole edges was also studied. Numerical analysis suggests that the …
-
Tensile rupture strength of single-bolt connections in pultruded structures
… equation allows the engineer to estimate the net-section tensile strength based on the connection geometry and the tensile material strength from the literature or manufacturer’s data, if measured according to ASTM D5766. The work is supported by results of 60 existing single-bolt connection …
-
Predicted Redidual Strength of Damaged IsoTruss® Structures
… in residual strength trends are compared to net section strength, which assumes a linear relationship between damage size and residual strength. Results indicate that the 6-node IsoTruss® configuration is the most damage tolerant structure in the sense that the 6-node configuration deviates …
-
Effects of Flange Holes on Flexural Behavior of Steel Beams
… flexural strength can be ignored if the gross-section plastic moment is greater than a modified net-section fracture moment hence, beam members shall be designed to carry the gross-section plastic moment. Otherwise, the beam members shall be designed to carry the modified net-section fracture …
-
Inelastic Cyclic Behavior of Bolted Flange Plate Connections
… demonstrated that capacity controlled by the net section fracture of the girder is lower than the full plastic bending capacity, which invalidates the current design provisions. The inelastic behavior of BFP connections can be modeled by using several flexural elements and rotational springs. …
-
The effect of creep strain rate on damage accumulation in type 316H austenitic stainless steel
… rupture for a variety of<br/>different applied net section stresses. A range of net section stresses were tested and it was<br/>subsequently found that the greater the net section stress, the greater the creep strain on failure and<br/>the shorter the time to rupture. This showed that equal …
-
Efficient finite element modeling of WT sections subjected to uniaxial tension
… have the potential to significantly reduce the net section rupture capacity of a section.;The present study is focused on developing finite element tools capable of capturing the peak loads and behavioral response exhibited is the previous WVU experimental tests. The main objective of the finite …
-
Initiation, Growth, and Arrest of Cracks in Constrained Sintering Materials
… sinter-crack is found to be characterized by the net section stress, which correlates with the sinter-crack growth rate. Finally, guidelines for design and processing are suggested for suppressing sinter-cracking, leading to quality sintered products.
-
The deformation and fracture of unidirectional boron-aluminum
… near the notch tip.</p><p>It was found that the net section stress at failure for center-notched specimens was considerably below that of an unnotched specimen. The net section stress at failure decreased sharply in the range 0 ≤ 2a/w ≤ 0.2. However, for 2a/w ≥ 0.2, this stress remained …
-
Optimum design of bolted composite lap joints under mechanical and thermal loading
… parametric study and design optimization. The Genetic Algorithm (GA), a powerful optimization technique for multiple extrema functions in multiple dimensions search spaces, is applied in conjunction with the complex potential and variational formulation to achieve optimum designs of bolted …
-
Fatigue Crack Initiation from Stress Concentrations in Cast Steels
… of the stress concentration factor and the net section stress. The results obtained were compared with the initiation lives of specimens with notches of 12.5 mm and 25.4 mm with sand cast surfaces. This permitted the calculation of the effective notch radius arising from the cast surfaces, …
-
Characterization of new particulate MMC materials and bolted joints through applicable ASTM standards
… the major mode of failure in PRMMC is due to net-section failure on account of its brittle nature. Also higher clamping force provides higher frictional resistance and lateral support as a result of which the ultimate failure of MMC increases even though the mode of failure remains the same.
-
Crack growth measurements in boron/aluminum composite laminates and related analysis
… was concluded that all the specimens failed by net section yielding with only a small stress concentration present.</p>
-
Investigation of Ultimate Bending Strength of Steel Bracket Plates
… the material tensile rupture strength times the net elastic section modulus. Different bolt and plate sizes were tested to determine if this model is correct. It was found that the current model is conservative and that the material tensile rupture strength times the net plastic section modulus …
-
Tensile and fatigue behavior of punched structural steel plates
… and amount of reaming. From this testing, net section stress, strength ratio, and usable elongation values at failure were determined for each specimen variation. While grade of steel, hole size, and plate thickness displayed some influence on strength ratio and usable elongation, edge …
-
Structural Steel Connection Design For Tensile Rupture by Advanced Inelastic Analysis
… strength equations, while others are not. The net-section tensile rupture limit state is among the most basic limit states not captured using standard strength equations. It is not necessary to use standard strength equations in design by advanced inelastic analysis if the analysis provides a …
-
Experimental crack tip characterization for closed cell aluminum foam
… were tested in compression and their respective net section strength values were compared to those of un-notched ones. The results reveal a strength enhancement for the DEN specimens but no enhancement is seen for the SEN specimens. By reviewing the full field in-plane strain maps of the …
Page 1 of 2