Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Ni coating"”.
-
MECHANICAL BEHAVIOR OF COLD SPRAYED CU-NI COATING
… spray parameters to achieve a functional coating on a substrate. Copper-nickel (Cu-Ni) alloy is particularly suited for study, due to its feasibility as both coating and repair material to be deposited onto a substrate through cold spray technology and its well-established characteristics …
-
Coatings for alloys used in molten salt nuclear reactor
… alloys in a molten salts environment and develop coatings for inhibiting this corrosion. The alloys Hastelloy® N, Haynes® X-750, AISI 304, and AISI 316 were tested for corrosion in molten FLiNaK for 100 h at 700 °C under an argon gas cover. The Cr depletion was found to be the major cause of …
-
Oxidation Of Nickel And Nickel-Phosphorous Coated Aisi 430 Alloy: Effects Of Pre-Oxidation And Pre-Reduction
… that lower the SOFC output by the cathode poisoning phenomena. Application of protective coatings can mitigate oxidation and form a resistant layer over the chromia. In this study, the electroless and electrolytic deposition methods were used to obtain uniform deposition despite substrate …
-
Novel approaches to store hydrogen in high capacity hydride
… storage in high capacity metal hydride with LaNi5 as a model and Mg as the targeted material. Firstly, size effects were studied on LaNi5. LaNi5 nanoparticles by combustion-reduction method showed greatly improved kinetics but no significant changes in thermodynamics compared with bulk LaNi5. …
-
Tailoring Zn-Cr Layered Double Hydroxide for Nanocomposite Coatings
Composite coatings are widely used in metal finishing to improve mechanical properties, corrosion resistance, and thermal stability. These properties are highly determined by the size and distribution of reinforcing phases in the matrix. Nowadays, the demands for coatings with extreme service …
-
Fabrication of Ti/TiH2 powder blending by Powder Metallurgy
In this work, different amounts of titanium hydride were blended with commercial pure (CP) titanium to fabricate titanium parts using conventional powder metallurgy and container-less Hot Isostatic Pressing (HIP). Titanium composites reinforced with SiC particulates have also been prepared. In …
-
Non-Destructive Characterization of Zircaloy-4 Nuclear Fuel Cladding Using Neutron Scattering Techniques
<p>The presence of hydrogen (H) and zirconium hydrides (ZrH<sub>1.7</sub>) in Zircaloy-4 nuclear fuel cladding has been a significant topic of recent cladding research. Uptake of H into Zircaloy-4 nuclear fuel cladding occurs during normal reactor operation and can lead to material embrittlement …
-
Powder/Sol-enhanced Au–Ni Electroplated Composite Coatings: Structures, Properties and Mechanisms
… this thesis research is to study and develop Au–Ni based composite coatings with improved mechanical properties. Noble Au coatings have a wide range of applications including various electrical contacts, decorative coating and jewelry. However, the low hardness and poor wear resistance of the …
-
Electrodeposition of nickel-based composite coatings for tribological applications
… electro deposition processes for producing nickel-based composite coatings for application in tribology, including: Ni/BMA luminescent coating, Ni-P/MoS2 and Ni-P/WS2 self-lubricating coatings.<br/><br/> In the first part, a new luminescent Ni coating containing an embedded, blue emitting …
-
Copper Nanowires Synthesis and Self-Assembly for Interconnect Applications
… precisely controlling the orientation and positioning of nanowires (NWs) on a large-scale area and assembling into a functional device is still a state of the art problem. This thesis focuses on the dimensionally controlled copper nanowires (Cu NWs) synthesis, and magnetic field assisted …
-
Cold Spray Assisted Mg/Al Dissimilar Resistance Spot Welds
… is particularly limited when directly joining Al and Mg because of these IMC-related issues. This study investigates the use of cold spray (CS) technology to enable reliable RSW of dissimilar Al/Mg joints. Cold spray is a solid-state deposition method that can create interfacial coatings, …
-
Production and Characterization of Zn-Ni Nano-Composite Coatings Using Sol-Enhanced Electrodeposition Method
Zn-Ni coatings provide sacrificial corrosion protection for steel components and are widely used by automotive manufacturers and fasteners industries in particular. It has been reported that Zn-Ni coatings with single γ-Ni5Zn21 phase structure and Ni content in the range of 10-14 wt.% possess five …
-
The Process Fundamentals and Parameters of Electro-Spark Deposition
… of depositing wear and corrosion resistance coating to repair, to improve and to extend the service life of the components and tools. During the coating process, short duration of electrical pulses ranging from a few microseconds to milliseconds are used to deposit the electrode material to …