Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Nicalon"”.

  1. Processing and mechanical behavior of Nicalon/SiC and Nextel/SiC composites with sol-gel derived oxide interfacial coatings

    … of ceramic matrix composites. Currently, Nicalon-fiber/SiC-matrix composites and Nextel-fiber/SiC-matrix composites owe their good mechanical properties at room temperature to either carbon (C) or boron nitride (BN) interfaces, which provide a weak interfacial bond. However, C and BN …

    utk-theses Repository record for Processing and mechanical behavior of Nicalon/SiC and Nextel/SiC composites with sol-gel derived oxide interfacial coatings (opens in a new tab)

  2. Damage analysis and mechanical response of as-received and heat-treated Nicalon/CAS-II glass-ceramic matrix composites

    … in and mechanical response of heat-treated NicaloniCAS-II laminates subjected to monotonic flexure and axial loading and to cyclic tensile loading are reported. The specimens were subjected to post-processing heat treatments at 900°, 1000°, and l100°C in air for 100 hours. Changes at the …

    vt Repository record for Damage analysis and mechanical response of as-received and heat-treated Nicalon/CAS-II glass-ceramic matrix composites (opens in a new tab)

  3. A study of the mechanical properties and oxidation resistance of Nicalon/SiC composites with sol-gel-derived oxide interafacial coatings

    … resulting in the toughening of the composite. Nicalon&red;-fiber/SiC-matrix composites have been fabricated with a carbon layer between fiber and matrix in order to provide the necessary weakening. Carbon, however, is susceptible to attack by oxygen, rendering it unsuitable as an interfacial …

    ut-knoxville Repository record for A study of the mechanical properties and oxidation resistance of Nicalon/SiC composites with sol-gel-derived oxide interafacial coatings (opens in a new tab)

  4. Processing and characterization of nanoparticle and carbon nanotube reinforced continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis

    … pyrolysis (PIP) method for mechanical testing. Nicalon™ ceramic grade silicon carbide fiber was used as the reinforcements, and KiON CERASET® preceramic polymer was used as the matrix in this study. Further, the effects of nanoparticles, carbon nanotubes, and the combination of the two, as CFCC …

    hawaii Repository record for Processing and characterization of nanoparticle and carbon nanotube reinforced continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis (opens in a new tab)

  5. Fabric orientation effects on the monotonic and fatigue behavior of continuous fiber-reinforced ceramic-matrix composites (CFCCs)

    … The two CFCCs used in the study were: (i) a Nicalon woven-fabric reinforced alumina (Al<sub>2</sub>O<sub>3</sub>) matrix composite fabricated by the directed metal oxidation (DIMOX) process, and (ii) a Nicalon woven-fabric reinforced silicon carbide (SiC) matrix composite fabricated by an …

    utk-theses Repository record for Fabric orientation effects on the monotonic and fatigue behavior of continuous fiber-reinforced ceramic-matrix composites (CFCCs) (opens in a new tab)

  6. Low modulus, oxidation-resistant interface coatings for SiC/SiC composites

    … put down uniform and crack-free CMZP coatings on Nicalon cloth and tows using sol-gel and metal organic deposition (MOD). The coated Nicalon cloth samples and tows were infiltrated with SiC matrix using Chemical Vapor Infiltration (CVI). Bars were cut for flexure testing from the infiltrated …

    vt Repository record for Low modulus, oxidation-resistant interface coatings for SiC/SiC composites (opens in a new tab)

  7. Tensile behavior of unidirectional and cross-ply ceramic matrix composites

    … matrix composite (GCMC) reinforced with Nicalon fibers and a Blackglas™ composite also reinforced with Nicalon fibers. Both had a symmetric cross-ply layup. Initial observations of the composites showed significant porosity and some cracking in the Blackglas™ samples. The GCMC samples …

    vt Repository record for Tensile behavior of unidirectional and cross-ply ceramic matrix composites (opens in a new tab)

  8. Nondestructive evalu[a]tion and mechanical behavior of continuous fiber reinforced ceramic matrix composites (CFCCs)

    … to encourage wide applications of CFCCs, such as Nicalon(TM)/SiC, Nextel(TM)/Blackglas(TM), and Nicalon(TM)/CAS systems, nondestructive evaluation (NDE) of CFCCs is vital to characterize the integrity of the composites. Up to the present time, relatively little work has been performed on the NDE …

    utk-theses Repository record for Nondestructive evalu[a]tion and mechanical behavior of continuous fiber reinforced ceramic matrix composites (CFCCs) (opens in a new tab)

  9. Processing and characterization of continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis

    … The two types of fiber reinforcements were Nicalon™ and Carbon fibers, and KiON CERASET® preceramic polymer was used as the matrix in this study. Further, the effects of nanoparticles on processing and flexural mechanical performance of Nicalon/KiON CERASET® continuous fiber ceramic …

    hawaii Repository record for Processing and characterization of continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis (opens in a new tab)

  10. Experimental studies and modeling of mechanical behavior for NicalonTM/SiC and NextelTM/BlackglasTM fiber fabric-reinforced ceramic-matrix composites

    … fabric-reinforced CFCCs, namely, the plain-weave Nicalon fabric-reinforced SiC matrix composite and the crowfoot Nextel fabric-reinforced Blackglas composites, fabricated by ORNL and Northrop Grumman, respectively, which are under active consideration of designers for structural applications in …

    utk-theses Repository record for Experimental studies and modeling of mechanical behavior for NicalonTM/SiC and NextelTM/BlackglasTM fiber fabric-reinforced ceramic-matrix composites (opens in a new tab)

  11. Manufacturing and Testing of Ceramic Based Hybrid Composites with Various Fibers, Matrix Systems, and Processing Conditions

    … types of ceramic grade silicon carbide fibers, Nicalon™ and Hi-Nicalon™ Type S, as well as T300 carbon fiber were used as the reinforcements, and Polyramic® SPR-212, StarPCS™ SMP-10, and SMP-730 preceramic polymers were used as the matrix, in the study. Further, the effects of matrix sequence, …

    hawaii Repository record for Manufacturing and Testing of Ceramic Based Hybrid Composites with Various Fibers, Matrix Systems, and Processing Conditions (opens in a new tab)

  12. Application of Novel Materials and Radio Frequency Field Assisted Heating to Enable Out-of-oven Ceramic Processing and Chemical Manufacturing.

    … of commercial silicon carbide fibers like Hi-Nicalon and Sylramic fibers used as a reinforcing material for ceramic matrix composites was studied under low power RF fields. The presence of turbostratic carbon on surface of Hi-Nicalon fibers results in the significant heating of these fibers …

    tamu Repository record for Application of Novel Materials and Radio Frequency Field Assisted Heating to Enable Out-of-oven Ceramic Processing and Chemical Manufacturing. (opens in a new tab)

  13. Nondestructive evaluation of a high temperature ceramic matrix composite material

    … was to nondestructively characterize a 2-D Nicalon-reinforced, CVI-SiC matrix composite before and after exposure to 1000, 1200, and 1400 °C in oxidizing atmospheres of air. Concurrently, the nondestructive testing methods used to detect thermally induced changes in the SiC/SiC composite …

    vt Repository record for Nondestructive evaluation of a high temperature ceramic matrix composite material (opens in a new tab)

  14. Fatigue behavior of ceramic matrix composites at elevated temperatures under cyclic loading

    … investigate and characterize fatigue behavior of Nicalon fiber reinforced enhanced silicon carbide matrix. composites at 1800 of under fully reversed cyclic loading. Notch effect on quasi-static tensile response is also considered. Quasi-static and fatigue damage mechanisms and failure modes are …

    vt Repository record for Fatigue behavior of ceramic matrix composites at elevated temperatures under cyclic loading (opens in a new tab)

  15. Characterization and control of the fiber-matrix interface in ceramic matrix composites

    … revealedthat a silica layer on the surface of Nicalon/SiC fibers tightly bonds the fiber to the matrix. The strongly bonded fiber and matrix, combined with the reduction in the strength of the fibers that occurs during processing, resulted in the observed brittle behavior.</p> <p>The mechanical …

    ut-knoxville Repository record for Characterization and control of the fiber-matrix interface in ceramic matrix composites (opens in a new tab)

  16. Mechanical behavior of a ceramic matrix composite material

    … layers of plain weave silicon carbide cloth (Nicalon) has been studied. The mechanical testing which was performed included both flexural and tensile loading configurations. This testing was done not only to determine the material properties, but also to initiate a controlled amount of damage …

    vt Repository record for Mechanical behavior of a ceramic matrix composite material (opens in a new tab)

  17. Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite

    <p>Nicalon® plain-weave fiber fabric-reinforced silicon carbide (SiC) matrix composites with various fiber/matrix interface coating thicknesses have been successfully fabricated by novel forced chemical vapor infiltration (FCVI) methods. The influence of the interface coating thickness on the …

    ut-knoxville Repository record for Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite (opens in a new tab)

Page 1 of 2