Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 135 for “"Nickel base"”.

  1. Banding in nickel-base superalloys and steels

    Process irregularities in remelting furnace operation have an impact on the ingot solidification structure which depends on the local thermal conditions and the alloy concerned. In this work, a laboratory investigation into the structures resulting from interruptions in solid growth is presented in …

    ubc Repository record for Banding in nickel-base superalloys and steels (opens in a new tab) Download PDF for Banding in nickel-base superalloys and steels (opens in a new tab)

  2. Fatigue life prediction on nickel base superalloys

    … model has been developed to predict fatigue life based upon geometrical information from the initiating pores. A Paris law approach is used in conjunction with long crack propagation data. The model shows a good fit with experimental data and further improvements have been recommended in order to …

    soton Download PDF for Fatigue life prediction on nickel base superalloys (opens in a new tab)

  3. Fatigue damage accumulation in nickel base superalloys.

    Tangentially oriented Waspaloy specimens taken from the bore section of a turbine disc were subjected to low cycle fatigue in the form of cyclic four point bend tests. Substantial differences in grain size and structure occurred across the section of the disc. Fatigue damage occurred primarily as a …

    whiterose Download PDF for Fatigue damage accumulation in nickel base superalloys. (opens in a new tab)

  4. Internal oxidation in iron and nickel base alloys.

    The internal oxidation behaviour of Ni-base and Fe-base alloys containing approximately 5 at% Al and both with and without low concentration Cr additions in flowing low-oxygen atmospheres at 1273 K was studied. There were two groups of Febase alloys; ferritic alloys that were Fe-Al-Cr and others …

    unsw Repository record for Internal oxidation in iron and nickel base alloys. (opens in a new tab)

  5. MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT

    … and room temperature tensile properties of nickel base wide gap brazed joints have been investigated using IN625 as the base metal and Nicrobraz LC and Nicrogap 16 as the filler metal and gap filler, respectively. Three different gap widths were studied, i.e., 0.4, 0.8 and 1.2mm. The gaps …

    nus Repository record for MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT (opens in a new tab) Download file for MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT (opens in a new tab)

  6. Life modeling of notched CM247LC DS nickel-base superalloy

    Directionally solidified (DS) nickel-base superalloys are used in high temperature gas turbine engines because of their high yield strength at extreme temperatures and strong low cycle fatigue (LCF) and creep resistance. Costly inspecting, servicing, and replacing of damaged components has …

    gatech Repository record for Life modeling of notched CM247LC DS nickel-base superalloy (opens in a new tab)

  7. Microstructure and Microchemistry of Rapidly Solidified Nickel-Base Powders

    An investigation of the microstructure and microchemistry of rapidly solidified powders was conducted using transmission electron microscopy in the scanning (STEM) and conventional (CTEM) modes. Using these high resolution techniques, it was possible to study the morphologies of the resultant …

    uiuc Repository record for Microstructure and Microchemistry of Rapidly Solidified Nickel-Base Powders (opens in a new tab)

  8. Computer simulation of carburization corrosion of nickel-base superalloys

    … used to simulate the corrosion behavior of Ni-based superalloys in carburizing atmospheres. The model is based on Crank-Nicholson finite difference solution of the diffusion equation. The code also includes the ternary cross diffusion effect due to substitutional alloying elements that are …

    vt Repository record for Computer simulation of carburization corrosion of nickel-base superalloys (opens in a new tab)

  9. Creep and fatigue of a single crystal nickel base superalloy

    … has led to the development of existing nickel-base superalloys to produce materials with optimum mechanical properties in the single crystal condition. As single crystals are known to be anisotropic, a study is needed to determine the general mechanical properties of these materials, and …

    aston Download PDF for Creep and fatigue of a single crystal nickel base superalloy (opens in a new tab)

  10. On the mesoscale plasticity of nickel-base superalloy single crystals

    … of aeroengines, namely, the so-called Ni-base superalloys. The complex hierarchical structure of these materials means that their macroscopic response is controlled to a great extent by the phenomena that play out on very fine scales, from angstroms (lattice spacing dimension) to …

    oxford Repository record for On the mesoscale plasticity of nickel-base superalloy single crystals (opens in a new tab)

  11. Computational modelling of tube production process for nickel-base alloys.

    … three dimensional tube pilgering reduction of nickel-base alloys were conducted using a commercial finite element code, DEFORM{dollar}\\sp{lcub}\\rm TM{rcub}{dollar}. Accuracy of the finite element modelling results was verified quantitatively by comparing solid extrusion simulation results …

    wvu Repository record for Computational modelling of tube production process for nickel-base alloys. (opens in a new tab)

  12. Mechanisms of Ordered Gamma Prime Precipitation in Nickel Base Superalloys

    Commercial superalloys like Rene88DT are used in high temperature applications like turbine disk in aircraft jet engines due to their excellent high temperature properties, including strength, ductility, improved fracture toughness, fatigue resistance, enhanced creep and oxidation resistance. …

    unt Repository record for Mechanisms of Ordered Gamma Prime Precipitation in Nickel Base Superalloys (opens in a new tab)

  13. Thermomechanical fatigue crack formation in nickel-base superalloys at notches

    … conditions present during engine operation. Nickel-base superalloys are typically used as blades and disks in the high pressure turbine section because they possess excellent fatigue strength, creep strength and corrosion resistance at elevated temperatures. Components undergo …

    gatech Repository record for Thermomechanical fatigue crack formation in nickel-base superalloys at notches (opens in a new tab)

  14. Investigation of hot cracking in additive manufactured nickel-base superalloys

    … such as γ’ precipitation strengthened Ni-base superalloys, are susceptible to cracking during both AM processing and subsequent densification and/or heat treatment. Therefore, to fully utilize the potential that AM offers, it is crucial to optimize the manufacturing process in order to …

    chalmers Repository record for Investigation of hot cracking in additive manufactured nickel-base superalloys (opens in a new tab)

Page 1 of 7