Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Nickel coating"”.
-
A novel nonelectrolytic process for chromium and nickel coating
The use of hexavalent chromium in metal coating operations, as per electrolytic processing, is subject to increasingly restrictive regulations due to its carcinogenic and toxic properties. Yet, these coatings are critical for corrosion resistance in aircraft parts such as hydraulic systems. This …
-
Electroplating of Black Nickel Composite Coatings
Black nickel coatings have specific properties which make them a suitable choice for different applications. Different processes are used to produce black nickel coatings which alter coating properties accordingly. These coatings are often electroplated over a sublayer like bright nickel to enhance …
-
Processing of single-walled carbon-nanotube metal matrix composites and a finite element model for the process
… heating methods. It has been found that a nickel coating and a fast processing time associated with the induction heating method enables carbon nanotubes to survive the high-temperature (above 1950 K) processing conditions. The result has been a Ti-SWCNT metal-matrix composite (MMC) which …
-
Oxidation Of Nickel And Nickel-Phosphorous Coated Aisi 430 Alloy: Effects Of Pre-Oxidation And Pre-Reduction
… poisoning phenomena. Application of protective coatings can mitigate oxidation and form a resistant layer over the chromia. In this study, the electroless and electrolytic deposition methods were used to obtain uniform deposition despite substrate geometry. The nickel coating was selected based …
-
Carbon Fiber Electronic Interconnects
… predictability to the interconnect function. A nickel coating can be applied over carbon fibers to enhance its conductivity and solderability. Analytical evaluations and experimental mechanical and electrical characterizations have been conducted to conclude that the carbon fiber interconnect is …
-
Compatibility problems generated in graphite fiber--metal matrix composites
… <p>The single graphite fibers coated with nickel have been shown to undergo structural recrystallization. Techniques have been developed to stop the structural recrystal1ization by coating the fibers with barrier coatings such as pyrolytic graphite.</p> <p>A method of composite fabrication …
-
Optimization of SLA Photopolymers for Nickel Plating Applications
… resin. To increase part performance, a nickel coating can then be applied in order to increase strength, chemical resistance, and heat deflection. This works well in lab environments, but in harsh conditions such as those presented in aerospace applications, large thermal gradients cause …
-
Electroless Nickel Plating and Spark Plasma Sintering of nano ZrO2 for Mechanical Property Enhancement
A new approach of combined electroless nickel plating (ENP) and spark plasma sintering (SPS) was used to determine the feasibility of fracture toughness improvement of ZrO2. Nano-grained yttria stabilized zirconia (YSZ) particles of 100nm average diameter were coated with about 1-5 nm of nickel …
-
Electrochemical Deposition of Metal Organic-Modified-Ceramic Nanoparticles to Improve Corrosion and Mechanical Properties
… Therefore, the need of developing protective coating to lower the cost of corrosion is very consistent. Among different methods, electrodeposition has been a popular method since it offer many advantages such as low cost, ability to control the surface and thickness of the coating, ability to …
-
Pulse-Electroplating: Process Parameters and Their Influence on the Formed Microstructure
Nickel-layers with a thickness of a few tens of microns were produced by pulseelectrodeposition using two electrolytic baths (I and II). The influence of temperature and current density on the obtained microstructure was investigated using Electrolyte I while for the effect of Nickel Sulfamate …
-
Electrochemical Deposition of Nickel Nanocomposites in Acidic Solution for Increased Corrosion Resistance
The optimal conditions for deposition of nickel coating and Ni-layered double hydroxide metal matrix composite coatings onto stainless steel discs in a modified all-sulfate solutions have been examined. Nickel films provide good general corrosion resistance and mechanical properties as a protective …
-
Radiation Response, Mechanical Property Changes, and Corrosion Behavior of Molten Salt Reactor Materials
… development and refinement. Hastelloy N, a nickel superalloy developed at ORNL explicitly for molten fluoride salt conditions, and 316SS, a widely used austenitic alloy, are among the leading candidates for immediate deployment in MSR systems. Data collected during initial development of …
-
Study of nickel-plated iron powder for powder metallurgical applications.
The use of coated iron-nickel powders in the production of sintered components of low-alloy steels has certain advantages over blended mixtures of the elemental powders. In particular, the former produce a more homogeneous material after a specific sintering treatment.There is a limited amount of …
-
Developing an Alternative Composite Material for Electromagnetic Interference Shielding
… it is necessary to deposit a conductive coating on natural fibres prior to process them into composites. Nickel was chosen as the material to be used for the conductive coating since it is one of the most effective materials for shielding electromagnetic interference. Electroless plating …
-
Metal Nanowires: Synthesis, Processing, and Structure-Property Relationships in the Context of Flexible Transparent Conducting Films
… to coat the copper nanowires with a layer of nickel in solution. Our measurements indicated that copper nanowires would double their sheet resistance in 3 months, but the sheet resistance of cupronickel nanowire films containing 20 mole% nickel will double in about 400 years. The addition of …
-
Fabricating High-Quality Structural Composite Laminates and Tailoring Their Surface Microstructure by Applying Magnetic Pressure and Magnetic Field
… are fabricated first by depositing short nickel coated carbon (NiC) fibers on a glass fabric surface by the proposed method and then followed by vacuum infusion. To demonstrate the effectiveness of this technique, the microstructure morphology of the deposited fabric and the resulting …
-
High-Precision Micropipette Thermal Sensor for Measurement of Thermal Conductivity of Carbon Nanotubes Thin Film
… is independent of tip size and dependent on the coating of Nickel. The detailed experimental setup for thermal conductivity measurement of CNT film is discussed and 73.418 W/moC was determined as the thermal conductivity of the CNT film at room temperature.
-
Multi-scale modeling of thermochemical behavior of nano-energetic materials
… the inert alumina layer with favorable metallic coatings such as nickel. Experiments indicate that nickel-coated aluminum particles ignite at temperatures significantly lower than the melting point of the oxide film, 2350 K due to the presence of inter-metallic reactions. Nickel coating is also …
Page 1 of 2