Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 168 for “"Noise Measurement"”.

  1. Spin Shot Noise measurement

    Charge shot noise, the intrinsic fluctuations in the electrical current resulting from the statistics of the arrival of discrete electronic charges, was predicted more than a century ago2 and has been an invaluable tool for examining the mechanism of charge transport and the nature of …

    rice Repository record for Spin Shot Noise measurement (opens in a new tab)

  2. A Digital Method For Phase Noise Measurement

    … method is used to detect sinusoidal phase noise components while reducing the need for computation intensive post-processing. We use the frequency-selective behavior of a narrow bandwidth infinite impulse response (IIR) digital filter to replace the frequency- domain evaluation of an FFT. …

    washington Repository record for A Digital Method For Phase Noise Measurement (opens in a new tab)

  3. Thermal Noise Measurement Below the Standard Quantum Limit

    … places sensitivity restrictions on physical measurements. These limitations manifest themselves in interferometric force and displacement measurements as uncertainty both in the photon number measured at a photodetector (shot noise), and in the quantum radiation pressure applied to the …

    lsu-thes Repository record for Thermal Noise Measurement Below the Standard Quantum Limit (opens in a new tab)

  4. A boat noise measurement device for law enforcement

    Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 2006

    msu Repository record for A boat noise measurement device for law enforcement (opens in a new tab)

  5. Phase-Locked Loop Based Oscillator Phase Noise Measurement Technique

    … receiver ends of a communication system. Phase noise is the parameter used to characterize an oscillator frequency stability. This thesis introduces a phase noise measurement technique using a phase-locked loop. A 100 MHz Colpitt’s oscillator, for the phase noise source, was designed and built. …

    ucf Repository record for Phase-Locked Loop Based Oscillator Phase Noise Measurement Technique (opens in a new tab)

  6. Methodologies for low excess noise measurement in wide bandgap materials.

    … work aims at investigating the avalanche excess noise characteristics of the AlxGa1-xInP (x from 0 to 1) avalanche photodiode (APDs) for practical applications such as underwater detection, oil well logging and space exploration. Normally, Si APDs are used to operate in the visible part of the …

    whiterose Download PDF for Methodologies for low excess noise measurement in wide bandgap materials. (opens in a new tab)

  7. Feedback controlled electromigration for the fabrication of point contacts and noise measurement applications

    … have developed a low-temperature, high-frequency noise measurement system. The system, which operates from 0.8 to 1.5 GHz at temperatures as low as 320 mK, takes advantage of impedance matching techniques to improve power transfer by up to 65%. This is accomplished by combining an inductor with …

    queens Repository record for Feedback controlled electromigration for the fabrication of point contacts and noise measurement applications (opens in a new tab)

  8. Ultra-low phase noise 100 MHz crystal oscillator & residual phase noise measurement systems

    In this thesis, an ultra-low phase noise 100 MHz crystal oscillator is presented that demonstrates a phase noise of around -140 dBc/Hz at a 100 Hz offset. The architecture and each of its constituent components are described in detail. The oscillator performance was measured for three separate …

    whiterose Download PDF for Ultra-low phase noise 100 MHz crystal oscillator & residual phase noise measurement systems (opens in a new tab)

  9. NEW TUNER CHARACTERIZATION AND GAIN COMPENSATION TECHNIQUES FOR ON-WAFER MICROWAVE NOISE MEASUREMENT

    … of a noisy device starts with an accurate measurement system. Measurement uncertainty and error continues to be a challenging subject as technology advances. The conventional method to noise characterization of on-wafer devices is to determine its noise parameters. To extract the noise …

    mcmaster Repository record for NEW TUNER CHARACTERIZATION AND GAIN COMPENSATION TECHNIQUES FOR ON-WAFER MICROWAVE NOISE MEASUREMENT (opens in a new tab)

  10. Ultra High Q Resonators and Very Low Phase Noise Measurement Systems for Low Noise Oscillators

    … into ultra high Q Bragg resonators, low phase noise measurement systems and low noise oscillators. The thesis is divided into three parts. The first is concerned with the modelling, design and implementation of an extremely high quality factor Bragg resonator. This resonator utilises an …

    whiterose Download PDF for Ultra High Q Resonators and Very Low Phase Noise Measurement Systems for Low Noise Oscillators (opens in a new tab)

  11. Electrochemical Noise Measurement of Pitting Corrosion of Stainless Steels in Potash Brine Solution at Elevated Temperatures

    This thesis explored the use of electrochemical noise measurement (ENM) as a tool to evaluate for the presence of pitting corrosion in saturated potash brine solutions at elevated temperatures. The materials investigated in this study were AISI 316L (UNS S31603) austenitic stainless steel used as a …

    sask Repository record for Electrochemical Noise Measurement of Pitting Corrosion of Stainless Steels in Potash Brine Solution at Elevated Temperatures (opens in a new tab)

  12. Performance of a fast frequency-hopped noncoherent MFSK receiver with non-ideal noise normalization combining over Ricean fading channels with partial-band interference

    … is modeled as a Gaussian process.The noise-normalized receiver is employed to minimize partial-band interference effects, and the effect of inaccurate noise measurement on the ability of the noise-normalized receiver to reject partial-band interference is examined. Each diversity …

    nps Repository record for Performance of a fast frequency-hopped noncoherent MFSK receiver with non-ideal noise normalization combining over Ricean fading channels with partial-band interference (opens in a new tab)

  13. Design of the digital satellite link interface for a system that detects the precursory electromagnetic emissions associated with earthquakes.

    … of a computer controlled radio frequency (RF) noise measurement and recording system in the 30. 45 MHz and 150.75 MHz range and the interfacing of this system to a digital satellite link is presented. Earthquake prediction by the use of various precursors and the specific use of electromagnetic …

    nps Repository record for Design of the digital satellite link interface for a system that detects the precursory electromagnetic emissions associated with earthquakes. (opens in a new tab)

  14. Very low noise cryogenic receivers and measurement electronics

    … purpose of this thesis was to develop very low noise cryogenic receivers and related high accuracy measurement setups to validate the operation of the receivers. Different types of cryogenic noise measurement setups were developed and compared. The noise measurement accuracy was improved for …

    aalto Repository record for Very low noise cryogenic receivers and measurement electronics (opens in a new tab)

  15. A temperature insensitive low noise RC relaxation oscillator

    … absence of current source in the RC branch, good noise performance is also achieved. Combined with the comparator offset canceling switch matrix, good temperature stability and noise performance is achieved. Fabricated in the 65 nm CMOS technology, the prototypes achieve an average inaccuracy of …

    uiuc Repository record for A temperature insensitive low noise RC relaxation oscillator (opens in a new tab)

  16. Electrical studies on hybrid MIS structures incorporating CdS nanoparticles in organic films.

    … electrical characterisations and low-frequency noise properties of Langmuir-Blodgett (LB) films in metal-insulator-semiconductor (MIS) structure. Two types of insulating films based on hybrid organic-inorganic materials sandwiched between metal and semiconductor were fabricated. The original …

    sheffield-hallam Download PDF for Electrical studies on hybrid MIS structures incorporating CdS nanoparticles in organic films. (opens in a new tab)

  17. Remanent state noise in particulate magnetic recording media

    Remanent state noise is the variation in stray flux emanating from a magnetic recording medium which is in a remanent state of magnetisation. A portion of this noise is related to the magnetic microstructure of the recording medium. This study had two main objectives. The first was to devise and …

    cent-lancashire Download PDF for Remanent state noise in particulate magnetic recording media (opens in a new tab)

  18. Characterization of 1/f noise in bird's beaking region of MOS transistor

    <p>Low frequency noise (Flicker noise or 1/f noise) dominates the noise performance of most MOS amplifiers below a few kilohertz and often is the dominant noise source even at much higher frequencies. The understanding of low frequency noise, or 1/f noise, has been a difficult challenge and many …

    iastate Repository record for Characterization of 1/f noise in bird's beaking region of MOS transistor (opens in a new tab)

Page 1 of 9