Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 547 for “"Noise Sources"”.

  1. Noise Sources Characterization of Automotive HVAC Systems

    <p>The noise sources and mechanisms of the front and rear HVAC systems of an automotive are characterized experimentally. The front system has three main outlet ducts equipped with louvers and operates in two modes of bypass and recirculation. The inlet and outlet sides of the rear system are both …

    mcmaster Repository record for Noise Sources Characterization of Automotive HVAC Systems (opens in a new tab)

  2. Modelling counter rotating open rotor installation noise sources

    … effort that aims to accurately predict the noise radiated by open rotors. This thesis focuses on the noise radiated by an installed open rotor. In this configuration one of the major noise sources could be the ingestion of a turbulent boundary layer that has developed on the fuselage of the …

    soton Download PDF for Modelling counter rotating open rotor installation noise sources (opens in a new tab)

  3. Scaling IoT-based noise cancellation to multiple noise sources

    … (IoT) sensing techniques with active noise cancellation (ANC) has demonstrated certain benefits over the conventional methods for ANC, including wideband cancellation without blocking the ear and non-causal adaptive filtering. These benefits, however, can only be observed in acoustic …

    uiuc Repository record for Scaling IoT-based noise cancellation to multiple noise sources (opens in a new tab)

  4. Investigation of Noise Sources and Propagation in External Gear Pumps

    … to human operators and passengers where noise is one of the main constraints to the acceptance and spread of this technology.

    purdue-thes Repository record for Investigation of Noise Sources and Propagation in External Gear Pumps (opens in a new tab)

  5. Analysis of practical implementations of quantum operations under realistic noise sources

    … by the need for a more systematic treatment of noise in photon-heralded operations, Chapter 4 develops an analytic perturbative method for probabilistic quantum gates between non-interacting emitters. Based on the Zero-Photon-Generation formalism, this method describes light–matter dynamics …

    calgary Repository record for Analysis of practical implementations of quantum operations under realistic noise sources (opens in a new tab)

  6. An empirical investigation of the directivity of external industrial noise sources

    … with the directivity of external industrial noise sources. The purpose is to investigate the possibility of making measurements with consideration to the directivity of these types of sources, and using this knowledge as a basis for the possibility of taking measures for reduction of sound …

    chalmers Repository record for An empirical investigation of the directivity of external industrial noise sources (opens in a new tab)

  7. Investigation of Noise Sources in Three-Stream Jets using Turbulence Characteristics

    Key areas of noise sources are investigated through comparison of eddy convection velocity and turbulence measurements in three-stream nozzles. A Time-Resolved Doppler Global Velocimetry (TR-DGV) Instrument was applied to the Nozzle Acoustic Test Rig (NATR) at NASA's Aero-Acoustic Propulsion Lab …

    vt Repository record for Investigation of Noise Sources in Three-Stream Jets using Turbulence Characteristics (opens in a new tab)

  8. Identifying noise sources and testing noise control solutions in a manufacturing facility

    … by acoustical engineers to identify the loudest noise sources in a manufacturing environment. Each method has its own advantages and disadvantages and when used exclusively can be at best time consuming, at worst inconclusive. Using the right combination of these techniques, the loudest noise …

    iastate Repository record for Identifying noise sources and testing noise control solutions in a manufacturing facility (opens in a new tab)

  9. Measurement and Prediction of Rotor Noise Sources for sUAS in Outdoor and Laboratory Environments

    … comparison of aerodynamic performance and noise of eVTOL rotors operating in multiple facilities, and analysis of the noise associated with an outrunner brushless DC motor. Empirical and low-order models are used to predict aerodynamic performance, tonal noise, and broadband noise for …

    vt Repository record for Measurement and Prediction of Rotor Noise Sources for sUAS in Outdoor and Laboratory Environments (opens in a new tab)

  10. Frequency conversion analysis of noise in heterojunction bipolar transistor oscillators including periodically modulated noise sources

    <p>A procedure which may be used to analyze the noise characteristics of HBT oscillators is presented. A large signal model of a HBT is developed based largely on the Gummel-Poon transistor model. A new base-emitter diffusion capacitance model is also generated which shows improved accuracy over …

    iastate Repository record for Frequency conversion analysis of noise in heterojunction bipolar transistor oscillators including periodically modulated noise sources (opens in a new tab)

  11. Character Of Signal And Noise Sources In Dispersive And Static Fourier Transform Remote-sensing Raman Spectrometers

    … dynamic range with more luminous radiation sources. However, the advent of pulsed laser excitation sources and time-gated detectors made possible remote Raman measurements. Since that time, a number of research groups have proposed utilizing remote-sensing Raman spectrometers for planetary …

    hawaii Repository record for Character Of Signal And Noise Sources In Dispersive And Static Fourier Transform Remote-sensing Raman Spectrometers (opens in a new tab)

  12. Determination of potential noise sources in the instrumentation used for measurement of the piezoelectric effect in bone

    … but also for determination of potential noise sources which can mask the desired signals. In the past, three amplification methods have been used to measure the electrical response of bone: current amplification, voltage amplification, and charge amplification. Of the three, the voltage …

    ut-knoxville Repository record for Determination of potential noise sources in the instrumentation used for measurement of the piezoelectric effect in bone (opens in a new tab)

  13. Proposed Revisions to Procedures for Testing and Evaluating Radiating Noise Sources from Small Firearms, including the ANSI/ASA S12.42-2010 Procedure

    The escalating cost of claims for Noise Induced Hearing Loss (NIHL) in the Canadian Armed Forces (CAF) supports the need to review and upgrade current hearing conservation practices. The rise of these escalating costs and the need to protect the military personnel when training in extreme noise …

    ottawa-retro Repository record for Proposed Revisions to Procedures for Testing and Evaluating Radiating Noise Sources from Small Firearms, including the ANSI/ASA S12.42-2010 Procedure (opens in a new tab)

  14. Numerical modeling of ambient noise seismic interferometry

    … using active seismic measurements, with man-made sources, have been applied at a few test sites, and the use of passive measurements, with natural sources, has been considered as a probable cost-efficient method to monitor CO2 migration and leakage. This numerical modeling study examines the use …

    mtu Repository record for Numerical modeling of ambient noise seismic interferometry (opens in a new tab)

Page 1 of 28