Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 164 for “"Non destructive method"”.

  1. Pavement evaluation with a non-destructive method, the falling weight deflectometer

    … of the elastic modulus of pavement layers by destructive or nondestructive testing. Nondestructive testing has many advantages, such as high speed and low cost compared to destructive testing. The falling weight deflectometer (FWD) test is the most widely accepted and used technique for …

    ets-quebec Download PDF for Pavement evaluation with a non-destructive method, the falling weight deflectometer (opens in a new tab)

  2. COMPARISON OF NEUTRON NON DESTRUCTIVE METHOD AND CONVENTIONAL CHEMICAL METHOD FOR CHLORIDE MEASUREMENT IN CONCRETE

    … is to compare the performance of a neutron-based nondestructive testing method, Prompt Gamma Activation Analysis (PGAA) against the destructive wet chemistry method ASTM C-1152 currently used to determine the chloride concentration in concrete. Two modes of PGAA operation were tested. One was to …

    maryland Repository record for COMPARISON OF NEUTRON NON DESTRUCTIVE METHOD AND CONVENTIONAL CHEMICAL METHOD FOR CHLORIDE MEASUREMENT IN CONCRETE (opens in a new tab)

  3. Identification of enzymatic browning in apples through the non-destructive method of X-ray CT scan imaging

    Αυτή η μεταπτυχιακή διπλωματική εργασία έχει ως αντικείμενο μελέτης τον προσδιορισμό της εσωτερικής ενζυμικής αμαύρωσης σε μήλα μέσω της μη καταστρεπτικής μεθόδου της X-ray CT scan απεικόνισης. Αρχικά χρησιμοποιήθηκε μια καταστρεπτική αναλυτική μέθοδος για τον προσδιορισμό της ενεργότητας των …

    athens Repository record for Identification of enzymatic browning in apples through the non-destructive method of X-ray CT scan imaging (opens in a new tab)

  4. Infrared thermography as a non-destructive method to measure moisture patterns in lime-plaster finishes of historic free-standing exterior adobe walls

    Infrared thermography (IRT) is used as a non-destructive testing method to detect subsurface features such as defects and anomalies based on temperature differences. Recent, studies showed that IRT is increasingly being used to map moisture distribution and detect areas of moisture related …

    penn Repository record for Infrared thermography as a non-destructive method to measure moisture patterns in lime-plaster finishes of historic free-standing exterior adobe walls (opens in a new tab)

  5. Characterization of thin layers into concrete with Ground Penetrating Radar

    The Ground Penetrating Radar (GPR) is a non-destructive method used for roads and buildings inspection: it is well adapted to detect the different layers constituting the structures. The objective of this thesis is to develop a method for a fast determination of the properties of a buried layer on …

    liege Repository record for Characterization of thin layers into concrete with Ground Penetrating Radar (opens in a new tab) Download PDF for Characterization of thin layers into concrete with Ground Penetrating Radar (opens in a new tab)

  6. Detection of sub-surface stresses in ferromagnetic materials using a new Barkhausen noise method

    <p>In this work, a new, non-destructive method for obtaining stress-depth gradients in ferromagnetic structures was developed, using the information contained within magnetic Barkhausen emissions. A depth- and stress-dependent model for the frequency spectrum of Barkhausen emissions was derived and …

    iastate Repository record for Detection of sub-surface stresses in ferromagnetic materials using a new Barkhausen noise method (opens in a new tab)

  7. Generation and detection of defects in metallic parts fabricated by selective laser melting and electron beam melting and their effects on mechanical properties.

    … features of defects, to identify effective non-destructive method(s) to detect these defects, and to characterize the effect of defects on mechanical properties of SLM- and EBM-produced parts. The study began by generating stochastic defects via adjustment to process parameters from optimal …

    louisville Repository record for Generation and detection of defects in metallic parts fabricated by selective laser melting and electron beam melting and their effects on mechanical properties. (opens in a new tab)

  8. Microstructure and Transport Properties of Porous Li-ion Electrodes

    … we explored and developed several experimental methods to find the electronic and ionic conductivity of both simulated carbon domains and complete electrode films. The goal was not only to elucidate the role carbon agglomerates play, but also to develop a non-destructive method of determining …

    byu Repository record for Microstructure and Transport Properties of Porous Li-ion Electrodes (opens in a new tab) Download PDF for Microstructure and Transport Properties of Porous Li-ion Electrodes (opens in a new tab)

  9. Ανάπτυξη της τεχνικής της μικρο-φθορισιμετρίας ακτίνων Χ και αναλυτικών εφαρμογών της στην πολιτισμική κληρονομιά

    … studying and validating novel analytical methodologies and applications targeted to cultural heritage artefacts. The micro-XRF technique has wide applicability in the field of Cultural Heritage as a non-destructive method, that can provide fast qualitative elemental analyses and under …

    greece Repository record for Ανάπτυξη της τεχνικής της μικρο-φθορισιμετρίας ακτίνων Χ και αναλυτικών εφαρμογών της στην πολιτισμική κληρονομιά (opens in a new tab)

  10. INDUCTION ASSISTED THERMOGRAPHY FOR INSPECTION OF MICRO DEFECTS ON SHEET METALS

    … focuses on Induction assisted Thermography as a non-contact and non-destructive method of Inspecting micro defects on sheet metals used for making automotive body panels. Induction heating as a source of excitation to elevate the temperatures of sheet metals for uniform heating and detect ability …

    clemson Repository record for INDUCTION ASSISTED THERMOGRAPHY FOR INSPECTION OF MICRO DEFECTS ON SHEET METALS (opens in a new tab)

  11. Geochemistry of magnesian granulites in feldspathic lunar meteorites Allan Hills A81005 and Dhofar 309

    … and mineral compositions. This virtually non-destructive method is useful for rare samples and fragments in thin section. Magnesian granulites in Allan Hills A81005 and Dhofar 309 share similar major and trace element compositions. As these two meteorites are not paired, their comparable …

    rice Repository record for Geochemistry of magnesian granulites in feldspathic lunar meteorites Allan Hills A81005 and Dhofar 309 (opens in a new tab)

  12. The chromatographic separation of gilsonite

    … hydrocarbon minerals into their constituents non-destructively is a very difficult problem. A non-destructive analysis of the hydrocarbon minerals is essential to their wise utilization. Chromatography represents a non-destructive means of separating adsorbable substances non-destructively …

    byu Repository record for The chromatographic separation of gilsonite (opens in a new tab) Download PDF for The chromatographic separation of gilsonite (opens in a new tab)

  13. 3D Laser Imaging and Modeling of Iron Meteorites and Tektites

    3D laser imaging is a non-destructive method devised to calculate bulk density by creating volumetrically accurate computer models of hand samples. The focus of this research was to streamline the imaging process and to mitigate any potential errors. 3D laser imaging captured with great detail (30 …

    carleton Repository record for 3D Laser Imaging and Modeling of Iron Meteorites and Tektites (opens in a new tab)

  14. Determinação de parâmetros (sólidos solúveis, pH e acidez titulável) em ameixas intactas usando espectroscopia no infravermelho próximo e seleção de comprimento de onda

    … reflectance spectroscopy (NIRS) as a rapid and non-destructive method to determine the soluble solid content (SSC), pH and titratable acidity of intact plums. Samples of plum with a total solids content ranging from 5.7 to 15%, pH from 2.72 to 3.84 and titratable acidity from 0.88 a 3.6% were …

    brazil-ufrn Repository record for Determinação de parâmetros (sólidos solúveis, pH e acidez titulável) em ameixas intactas usando espectroscopia no infravermelho próximo e seleção de comprimento de onda (opens in a new tab)

  15. Optical reflectance in fibrous tissues and skeletal muscles

    … propagation in soy extrudates and developed a non-destructive method to measure fiber formation. The method was successfully implemented in a fast laser scanning system for real time measurement. In addition to fibrous structures, skeletal muscle has a unique repetitive microstructure which …

    missouri Repository record for Optical reflectance in fibrous tissues and skeletal muscles (opens in a new tab)

  16. Determining the Efficacy of Predicting Beef Tenderness Using Proteins from Purge

    … tenderness at different aging points as a non-destructive method. Analysis of sodium dodecyl sulfate polyacrylamide (SDS-PAGE) gel electrophoresis reveals that proteins from purge at 3 day postmortem can predict tenderness of 3 day postmortem with 35.3% accuracy and tenderness of 7 day …

    sdstate Repository record for Determining the Efficacy of Predicting Beef Tenderness Using Proteins from Purge (opens in a new tab)

  17. Non-destructive radiocarbon and stable isotopic analyses of archaeological materials using plasma oxidation

    … an alternative to combustion, is shown to be a non-destructive method for obtaining radiocarbon dates on perishable organic artifacts. Electrically excited oxygen gently converts organic carbon to carbon dioxide. Radiocarbon measurements are then performed using accelerator mass spectrometry. …

    tamu Repository record for Non-destructive radiocarbon and stable isotopic analyses of archaeological materials using plasma oxidation (opens in a new tab)

  18. APPLICATION OF ARGON PRESSURE BROADENED RUBIDIUM VAPOR CELLS AS ULTRA-NARROW NOTCH FILTERS

    … is a widely used, highly versatile, and non-destructive method for characterizing the molecular makeup of unknown samples. In nearly all applications the vibrational modes of the constituent molecules provide the mechanism by which the laser light is inelastically scattered and …

    mtu Repository record for APPLICATION OF ARGON PRESSURE BROADENED RUBIDIUM VAPOR CELLS AS ULTRA-NARROW NOTCH FILTERS (opens in a new tab)

  19. Aplicação da microtomografia de raios X no processo de caracterização das estruturas internas do concreto

    X-ray microtomography is a non-destructive method that allows the visualization of the internal structure of the object and makes possible to generate trust internal graphics models of the object. Concrete is a mixture widely used in the construction industry due to the union between its mechanical …

    brazil-uerj Repository record for Aplicação da microtomografia de raios X no processo de caracterização das estruturas internas do concreto (opens in a new tab)

Page 1 of 9