Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 122 for “"Non destructive techniques"”.
-
In-situ Stress Measurement using Non-Destructive Techniques (NDTs)
… but it is a complicated and costly process. The Non-Destructive Techniques (NDTs) of stress measurement, such as Deformation Rate Analysis (DRA) and Acoustic Emission (AE), offer a practical alternative to the conventional methods. However, like all other methods, researchers have rightly raised …
-
Improving non-destructive techniques for stone weathering research in situ
… a variety of methods is available ranging from destructive to non-destructive (NDT) and sophisticated and expensive to more simple and economical. This thesis is based on the key principle of built heritage conservation i.e. to preserve as much original fabric as possible and keep destructive …
-
Residual stress measurements and analysis by destructive and non-destructive techniques
… of residual stresses were performed by both destructive and nondestructive techniques including ring-core (RC), neutron diffraction (ND) and positron annihilation spectroscopy (PAS). The results obtained by the PAS method indicate that the residual stresses in the cold-worked specimens were …
-
Non-destructive techniques for damage analysis in standards and hybrid bearings
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Comprehensive characterization of pulse flour microstructure using advanced non-destructive techniques
… and scanning electron microscopy (SEM) to non-invasively investigate the molecular changes in roller-milled chickpea, navy bean, green lentil, and yellow pea flours as influenced by milling configurations (termed as flour streams) and flour blending (termed as flour blends). In the realm of …
-
Evaluation of Seal Integrity of Flexible Food Polytrays by Destructive and Non-Destructive Techniques
… wrinkles from Stegner and Wornick Co were tested destructively and non-destructively.</p> <p>A destructive burst test was used to test the burst pressures and the leak developed in trays. A computer interface was designed using National Instrument Labview<sup>®</sup> program which could …
-
Evaluation of Seal Integrity of Flexible Food Polytrays by Destructive and Non-Destructive Techniques
… remain very high. The optimized test, whether destructive or non-destructive, must show that a particular defect, which might currently cause rejection, will not affect the quality of the items contained if passed as a good package. The unavailability of such a test was the basis for the …
-
Determination of micro-meso-macro damage mechanisms in geopolymer concrete using non-destructive techniques
… and real environmental conditions using Non-Destructive Tests (NDT)s.
-
Innovations in non-destructive techniques for fruit quality control applied to manipulation and inspection lines
La industria alimentaria, concretamente el sector poscosecha, necesita innovar en sus procesos productivos, optimizando los mismos para rentabilizar sus actividades, garantizando productos de calidad capaces de satisfacer las necesidades de los consumidores. La presente tesis doctoral se centra en …
-
Non-destructive techniques for in situ studies of easel paintings: development and application of a confocal X-ray micro-fluorescence system
This PhD thesis entitled “Non-destructive techniques for in situ studies of easel paintings: development and application of a confocal X-ray micro-fluorescence system.” with the supervision of Prof. Miguel Ángel Respaldiza and Dr. Francisco J. Ager was focused on physics applied to Cultural …
-
Experimental investigation of the effect of defects, non-detectable by means of conventional non destructive techniques, on the mode I fracture toughness of adhesively bonded composite joints
… are not detectable by means of conventional non destructive testing techniques, such as ultrasonic inspection or radiography. To accomplish this, an extensive experimental investigation has been conducted. The contaminating factors have been classified with regard to their origin, i.e. …
-
Developing non-destructive techniques to predict 'Hayward' kiwifruit storability : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Technology at Massey University, Palmerston North, New Zealand
… The objective of this work was to develop non-destructive techniques utilised at harvest to predict storability of individual or batches of ‘Hayward’ kiwifruit based on (near) skin properties. Segregation of fruit with low storage potential at harvest could enable that fruit to be sold …
-
Investigation of Wire Ropes and Cables Using Ultrasound
… the structures, structural health monitoring and non-destructive techniques are necessary. When it comes to cables, corrosion and fracture are highly damaging conditions that lead to stress concentrations and ultimately can cause structural failure. There is always a need for non-destructive …
-
Non-Destructive Methods for the Detection of Delaminations in Concrete Bridge Decks
… delaminations in concrete bridge decks, the non-destructive techniques (NDT) permit a frequent inspection of the slabs without damaging the structures. Within this study, twelve samples were realized, presenting diverse horizontal defects simulating delaminations. They were scanned with high …
-
Corrosion Prevention in Historic Concrete – Monitoring the Richards Medical Laboratories
This thesis proposes to analyze current non-destructive techniques for the early detection of factors leading to reinforcement corrosion as part of a preventive conservation strategy for reinforced concrete. These techniques were theoretically evaluated for their efficiency and compatibility of use …
-
Non-Invasive Multiple-Method Approaches to Characterize Landforms in the Anthropocene: A Study of the Periglacial Critical Zone
… environment and in using cost-efficient and non-destructive techniques, non-invasive methods are increasingly preferred. Characterization of the subsurface has progressed from being accomplished by ground-truthing data from non-invasive methods, to solely depending on increasingly reliable …
-
Towards precise grape management based on multispectral and hyperspectral remote sensing : a thesis presented in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Agriculture and Horticulture at Massey University, Manawatū, New Zealand
Non-destructive and rapidly measurements of grape quality allow vine growers to make effective decisions for selective harvesting and vineyard management, which results in more economic and sustainable wine production. The objective of this dissertation was to investigate the potential of using …
-
Infrared thermography for non-destructive identification of reinforcement in concrete
… reinforcing steel in concrete members. Other non-destructive techniques, such as the ultrasonic technique, are subject to errors due to large scatter in sound wave propagation velocity for the different components of concrete. Since thermal conductivity and heat capacity are less influenced by …
-
Η συμβολή της Φυσικής στη μελέτη εικαστικών έργων με τη χρήση μη-καταστροφικών αναλυτικών τεχνικών
… Foundation of the A.U.Th. For the measurements, non-destructive techniques were used in combination with the i-Tomography infrastructure that provides 5 degrees of freedom. The techniques include UV-Vis, Fourier transform infrared (FTIR), MicroRaman and X-Ray Fluorescence (XRF) spectroscopy, …
Page 1 of 7