Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"Non-isothermal crystallization"”.

  1. Non-isothermal crystallization of high density polyethylene

    <p>The quiescent non-isothermal crystallization kinetics of two polyethylene resins were investigated by the modified light depolarizing microscopy (LDM) technique developed by Ding and Spruiell (1994). The cooling rates studied were in the range of 5-5,000°C/min. Small angle light scattering …

    ut-knoxville Repository record for Non-isothermal crystallization of high density polyethylene (opens in a new tab)

  2. In-Situ Monitoring and Simulations of the Non-Isothermal Crystallization of FFF Printed Materials

    … Avrami model which accounts for changes in crystallization rate due to temperature and multiple crystallization mechanisms. The amount of polymer diffusion, also referred to as the degree of healing, was calculated using a novel incremental diffusion model which accounted for not only …

    vt Repository record for In-Situ Monitoring and Simulations of the Non-Isothermal Crystallization of FFF Printed Materials (opens in a new tab)

  3. Quiescent and Oriented Crystallization Behavior of Linear Low Density Polyethylenes

    <p>A series of isothermal and non-isothermal crystallization experiments were performed on nine linear low density polyethylenes and one high density polyethylene. In addition, melt spinning experiments were performed on three linear low density polyethylenes in order to gain a better understanding …

    ut-knoxville Repository record for Quiescent and Oriented Crystallization Behavior of Linear Low Density Polyethylenes (opens in a new tab)

  4. Morphological properties of poly (ethylene terephthalate) (PET) nanocomposites in relation to fracture toughness.

    … optical microscopy were used to determine the crystallization effects of MLS addition. Non isothermal crystallization kinetics showed that the melting temperature and crystallization temperature decrease as the MLS percent increases. This delayed crystallization along with the irregular …

    unt Repository record for Morphological properties of poly (ethylene terephthalate) (PET) nanocomposites in relation to fracture toughness. (opens in a new tab)

  5. Design and Fabrication of Polyvinylidene Fluoride for Triboelectric Nanogenerators

    … triboelectrification is a well-known phenomenon for centuries, the underlying physics behind it is still under debate, so a comprehensive study on triboelectrification is needed. Herein, effects of polyvinylidene fluoride (PVDF) friction layers thickness, contact area and porosity on TENGs …

    york Repository record for Design and Fabrication of Polyvinylidene Fluoride for Triboelectric Nanogenerators (opens in a new tab)

  6. Studies of Mathematical Modelling and Experimental On-line Measurement for the Tubular Film Blowing Process

    … of a mathematical model which includes a non-isothermal crystallization rate equation was tested. Subsequently, a new simplified model derived from a modified force balance was proposed and examined.</p> <p>Linear low density polyethylene, LLDPE, (melt flow index 1.0) provided by Dow …

    ut-knoxville Repository record for Studies of Mathematical Modelling and Experimental On-line Measurement for the Tubular Film Blowing Process (opens in a new tab)

  7. Study of poly (l-lactic acid)/poly (d-lactic acid) stereocomplex as nucleating agent for poly (l- lactic acid) crystallization

    … different cooling rates (5, 15, 25 C/min), DSC non-isothermal crystallization experiments are performed. The results suggest that in the presence of the stereocomplex, the PLLA crystallization temperatures are found to be higher than that of pure PLLA. By annealing PLLA at different temperatures …

    njit Repository record for Study of poly (l-lactic acid)/poly (d-lactic acid) stereocomplex as nucleating agent for poly (l- lactic acid) crystallization (opens in a new tab)

  8. Process/Structure/Property Relationships of Semi-Crystalline Polymers in Material Extrusion Additive Manufacturing

    … conditions. In the fourth project, we employed a non-isothermal crystallization model to directly predict the development of crystallinity based on given temperature profiles, whether monitored experimentally or predicted by the heat transfer model. The research documented notable discrepancies …

    vt Repository record for Process/Structure/Property Relationships of Semi-Crystalline Polymers in Material Extrusion Additive Manufacturing (opens in a new tab)

  9. Μελέτη της ομοιογένειας και της κρυστάλλωσης σε νέα δυαδικά μίγματα πολυεστέρων του 2,5-φουρανοδικαρβοξυλικού οξέος

    … In the first part of this thesis, the isothermal and non-isothermal crystallization from the melt and glass of two PAFs, poly(butylene 2,5-furandicarboxylate) (PBF) and poly(hexamethylene 2,5-furandicarboxylate) (PHF), were studied in detail, at very slow and moderate cooling and …

    greece Repository record for Μελέτη της ομοιογένειας και της κρυστάλλωσης σε νέα δυαδικά μίγματα πολυεστέρων του 2,5-φουρανοδικαρβοξυλικού οξέος (opens in a new tab)

  10. The manufacturing science of thermoplastic composites

    … consolidation process. The rapid rates and non-isothermal conditions of this process place a prime importance on developing an understanding of factors controlling crystallinity and interply bonding. The relationship of these properties to operating conditions, therefore, will become a …

    utk-theses Repository record for The manufacturing science of thermoplastic composites (opens in a new tab)

  11. Modeling of PEEK crystallization kinetics under transient thermal conditions

    … that captures poly-ether-ether-ketone (PEEK) crystallization over a broad temperature 𝑇 window (near glass transition temperature 𝑇g ~155°C < 𝑇 < near melting temperature 𝑇m ~310°C); and across cooling rates spanning from quasi-isothermal to ~10³ °C/min, which are inaccessible by conventional …

    ubc Repository record for Modeling of PEEK crystallization kinetics under transient thermal conditions (opens in a new tab) Download PDF for Modeling of PEEK crystallization kinetics under transient thermal conditions (opens in a new tab)

  12. The effects of comonomer content and tacticity on the nonisothermal crystallization kinetics of polypropylene

    <p>The quiescent non isothermal crystallization kinetics of six polypropylene resins varying in tacticity and ethylene content were investigated by light depolarizing microscopy (LDM) and differential scanning calorimetry (DSC). Crystallization behavior was defined for cooling rates in the range of …

    ut-knoxville Repository record for The effects of comonomer content and tacticity on the nonisothermal crystallization kinetics of polypropylene (opens in a new tab)

  13. Development of Polylactic Acid/Cellulose Nanofiber Biocomposite Foams

    … composite foams were investigated. During the isothermal and non-isothermal crystallization process, CNFs, acting as effective crystal nucleating agents, enhanced the crystal nucleation density, decreased the crystallite sizes, and accelerated the crystallization of PLA. Pressurized CO2 also …

    toronto-retro Repository record for Development of Polylactic Acid/Cellulose Nanofiber Biocomposite Foams (opens in a new tab)

  14. Novel Functional Graphene and its Thermodynamic Interfacial Localization in Biphasic Polyolefin Systems for Advanced Lightweight Applications

    … almost matching the neat PP ones. Lastly, PE non-isothermal crystallization kinetics are investigated to validate the experimental data. It is shown that the increase in material’s performance is in direct correlation with nucleation-controlled PE crystallization, induced by the synergistic …

    toronto-retro Repository record for Novel Functional Graphene and its Thermodynamic Interfacial Localization in Biphasic Polyolefin Systems for Advanced Lightweight Applications (opens in a new tab)

  15. Crystallization of polypropylene : experiments and modeling

    In this study, the quiescent crystallization of several polypropylenes (PPs) with different molecular characteristics was first examined using Differential Scanning Calorimetry (DSC) and Polarized Optical Microscopy (POM). The Avrami/Nakamura equation was employed to fit and predict crystallization …

    ubc Repository record for Crystallization of polypropylene : experiments and modeling (opens in a new tab) Download PDF for Crystallization of polypropylene : experiments and modeling (opens in a new tab)

  16. Influence of compatibilizers and liquid crystal polymers upon polypropylene blends.

    … of liquid crystal polymers (LCPs) on the primary crystallization process of polypropylene was investigated both in isothermal and non-isothermal crystallization behavior with a DSC instrument. The time required to complete the primary crystallization appears to be considerably reduced by the …

    arizona-thes Repository record for Influence of compatibilizers and liquid crystal polymers upon polypropylene blends. (opens in a new tab)

  17. Thermal and X-ray Analysis on the Origin of Double Melting Phenomena of Poly(L-lactic acid) Films

    … PLLA, films prepared under a wide range of crystallization conditions, including isothermal and non-isothermal crystallization from both the glassy state and the melt. The primary techniques used were differential scanning calorimetry (DSC), temperature modulated DSC (TMDSC), wide-angle …

    utk-theses Repository record for Thermal and X-ray Analysis on the Origin of Double Melting Phenomena of Poly(L-lactic acid) Films (opens in a new tab)

  18. Crystallization Behavior, Tailored Microstructure, and Structure-Property Relationships of Poly(Ether Ketone Ketone) and Polyolefins

    … process parameters on semi-crystalline polymer crystallization and final properties. All objectives utilized the advanced characterization technique of fast scanning calorimetry (FSC) using the Mettler Toledo Flash DSC 1. The first half of this work focuses on the high-performance …

    vt Repository record for Crystallization Behavior, Tailored Microstructure, and Structure-Property Relationships of Poly(Ether Ketone Ketone) and Polyolefins (opens in a new tab)

  19. Crystallization behavior of poly (p-phenylene sulfide): kinetics and morphology

    The crystallization behaviour of poly (p-phenylene sulfide) (PPS) has been studied. lsothermal rates of bulk crystallization, spherulitic radial growth rates, and nucleation densities were analyzed as functions of molecular weight of PPS, branching agent concentration, and chemical nature of the …

    vt Repository record for Crystallization behavior of poly (p-phenylene sulfide): kinetics and morphology (opens in a new tab)

Page 1 of 2