Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Non-pneumatic"”.
-
Development and Performance Analyses of Non-Pneumatic Wheels with Honeycomb Spokes
… of the tires with the terrain. The designs of pneumatic tires has evolved over the past many decades to satisfy multiple performance demands such as transfer of tractive/braking forces with minimal energy losses, ease of handling and directional control, ride comfort and road holding. Despite …
-
Improvements to a Two-Dimensional Model for Pneumatic and Non-Pneumatic Tires
… developed by Gasmi in 2011 to represent non-pneumatic tires. It centers on a thin, circular beam in contact with a rigid surface, which represents the belt package of the non-pneumatic tire. The beam is connected to a wheel with spokes. Gasmi developed a method to approximate these …
-
Modelling and analysis of a non-pneumatic tire-road interaction using finite element method
… and cornering performance. In this thesis, a non-pneumatic tire of size 15/6N6 was modelled and verified using Finite Element Analysis. The non-pneumatic tire model was verified through static and dynamic tests, including static footprint, vertical stiffness, and drum-cleat analyses. Tire-road …
-
Requirements Determination Of A Novel Non-Pneumatic Wheel Shear Beam For Low Rolling Resistance
… for the development of a low rolling loss non-pneumatic wheel. We propose to eliminate the hysteretic losses associated with the elastomeric shear layer and thus, reduce the corresponding rolling resistance by using linear elastic materials which are inherently non-hysteretic. Since the …
-
ROBUST PARAMETER DESIGN AND FINITE ELEMENT ANALYSIS FOR A NON-PNEUMATIC TIRE WITH LOW VIBRATION
During rolling of a non-pneumatic tire, vibration may be produced by the interaction of collapsible spokes with a shear deformable ring as they enter the contact region, buckle and then snap back into a state of tension. Other potential sources of vibration include the interaction of tire tread …
-
Modeling, finite element analysis, and optimization of Non-Pneumatic Tire (NPT) for the minimization of rolling resistance
Recently, the development of non-pneumatic tires (NPT) such as the Michelin Tweel is receiving increased attention due to potential advantages over pneumatic tires such as low mass, no run flat, good contact pressure distribution, and low rolling resistance (RR). This study focuses on the design of …
-
DESIGN AND ANALYSIS OF ALTERNATING SPOKE PAIR CONCEPTS FOR A NON-PNEUMATIC TIRE WITH REDUCED VIBRATION AT HIGH SPEED ROLLING
Recently, Michelin has invented an innovative non-pneumatic tire which has potential for improved handling, grip, comfort, and less rolling resistance when compared to a traditional pneumatic tire. The non-pneumatic wheel is manufactured from a molding process with integrated shear ring and …
-
Use of the Non-Pneumatic Anti-Shock Garment (NASG) For Life-Threatening Obstetric Hemorrhage: A Cost-Effectiveness Analysis in Egypt and Nigeria
OBJECTIVE: To assess the cost-effectiveness of a non-pneumatic anti-shock garment (NASG) for obstetric hemorrhage in tertiary hospitals in Egypt and Nigeria. METHODS: We combined published data from pre-intervention/NASG-intervention clinical trials with costs from study sites. For each country, we …
-
Use of Orthogonal Arrays for Efficient Evaluation of Geometric Designs for Reducing Vibration of a Non-Pneumatic Wheel During High-Speed Rolling
During high speed rolling of a non-pneumatic wheel, vibration may be produced by the interaction of collapsible spokes with a shear deformable ring as they enter the contact region, buckle and then snap back into a state of tension. In the present work, a 2D planar finite element model with …
-
A computational method for analysis of material properties of a non-pneumatic tire and their effects on static load deflection, vibration and energy loss from impact rolling over obstacles
… sources of vibration during rolling of a non pneumatic tire is the buckling phenomenon and snapping back of the spokes in tension when they enter and exit the contact zone. Another source of noise was hypothesized due to a flower pedal ring vibration effect due to discrete spoke …
-
Mechano-Pneumatic Wheel: Feasibility Analysis of the Concept and Parametric Optimization
… the development and analysis of a novel Mechano-Pneumatic Wheel (MPW) by integrating the strengths of both pneumatic and non-pneumatic wheels. While pneumatic tires provide excellent comfort and traction, they are prone to punctures and require frequent maintenance. In contrast, non-pneumatic …
-
Design of Meta-Materials Outside the Homogenization Limit Using Multiscale Analysis and Topology Optimization
… research is the design of the shear beam for a non-pneumatic wheel. Previously, a design optimization of a finite element model of the non-pneumatic wheel was completed, where a linear elastic material was simulated in the shear beam to reduce hysteretic energy losses. As part of the …
-
Multi-Scale, Multi-Criteria Design of Meta-Materials with Offset Periodicity
… meta-materials for use in the shear beam of a non-pneumatic wheel. By offsetting the said meta-material layers by a half-width of the Unit Cell, auxetic honeycomb-like geometry was obtained. This was the first time such a shape was observed as the result of Topology Optimization targeting the …
-
Modular Vehicle Design Concept
… monitoring, energy harvesting shock absorbers, non-pneumatic tires, and drive-by-wire options. Predictions on the outlook for the technology progressions is discussed to give insight into the viability of basing a vehicle concept on these technologies. Finally, physical design bounds are …
-
Development of a Two-dimensional Model of a Pneumatic Tire
The pneumatic tire has been studied extensively since its invention in 1888. With the advent of high-powered computers and the use of the finite element method, the understanding of the tire's complex non-linear behavior has grown tremendously. However, one weakness of finite element models is that …
-
DEVELOPMENT OF A NONLINEAR RIDE QUALITY MODEL TO AID IN TWEELå© PARAMETER SELECTION
… comfort and handling capability by developing a non-pneumatic tire they have dubbed the TWEEL©. To better understand what effects fitting a TWEEL with specific characteristics would have on the ride comfort of a vehicle a computer simulation was developed to study the effects of TWEEL stiffness …
-
Design and manufacturing of rover wheels with knitted superelastic textiles.
… This research aimed to design a superelastic non-pneumatic wheel to enable large recoverable deformations and energy absorption while driving on other planetary surfaces. This goal was achieved by incorporating a superelastic knitted textile as the wheel's surface and a superelastic …
-
A LAMINATED RING ON ELASTIC FOUNDATION MODEL WITH APPLICATION TO ANALYSIS OF TIRE-ROAD CONTACT
… with unilateral stiffness, which leads to a nonlinear deformation dependent stiffness typical of some non-pneumatic tires; 2) The model of the deformable ring is extended from simple Timoshenko rings to a laminated orthotropic ring model, with bending, shear stiffness and extensibility in the …
-
Interface-engineered Additive Manufacturing of Thermoplastic Polymers: Printing Technique and Material Design for End-use Manufacturing
… printing tensile specimens, bifurcated stents, non-pneumatic tires, and metatarsals, as well as a biodegradable bone implant. The TREE strategy paves the way for additive manufacturing of thermoplastic products with superior properties for various engineering applications.
-
STRAIGHT LINE BRAKING PERFORMANCE OF A ROAD VEHICLE WITH NON LINEAR TIRE STIFFNESS FORMULATION
… Michelin has undertaken the development of a non-pneumatic tire (called the TWEELTM) which can decouple the ride comfort and handling capability of road vehicles. Studies in the ride comfort area have shown reductions in the tire-to-road dynamic force using the TWEELTM. This might lead to …
Page 1 of 2