Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Nondestructive Test"”.
-
Hydrogen in metals: a nondestructive test
… and service industries, a need exists for a nondestructive test to determine the presence of hydrogen in a material system. The feasibility of such a system is examined here. Acoustic emission activity resulting from a microhardness indentation is employed to detect hydrogen in A106 and 4340 …
-
Nondestructive Test Methods for Rapid Assessment of Flexible Base Performance in Transportation Infrastructures
… quality assurance methods along with effective test methods and smart transportation planning must be considered and implemented to help communities increase the economic prosperity while retaining and ensuring a high quality of life to the people. The appropriate application of reliability to …
-
Damage assessment of a swirl glass mat reinforced polyurethane composite using nondestructive test methods
… composite samples were fatigue and creep tested either in a standard environment of air with 50% relative humidity or while immersed in distilled water or windshield washer fluid. Pre- and post-test samples were examined nondestructively, using C-scan ultrasonics and light-transmission …
-
Analysis of jointed plain concrete pavement systems with nondestructive test results using artificial neural networks
… the Falling Weight Deflectometer (FWD) field tests, several network architectures were also trained with varying levels of noise in them.;One of the most important advantages of the presented ANN approach is that the use of the ANN-based models resulted in a drastic reduction in computation …
-
Theoretical evaluation of the break off test for concrete
… concrete structures where size effect of the test specimens is attributed for the differences. Many nondestructive tests were developed to evaluate concrete strengths. In recent years, it was obvious that these tests are unreliable. As the infrastructure decays, more nondestructive tests are …
-
Residual stress measurement of plates using shearography
… stress induced into the blades reliably, using a nondestructive test. A newly proposed method for stress evaluation, incremental shearography, o ers the advantage of measuring transverse plate bending behavior at micron resolution. Shearography, a direct measure of surface slope, promises a …
-
Smart carbon/epoxy composites: Filament winding with embedded sensor
… A pneumatic actuated press was developed as a nondestructive test instrument. A stress relaxation experiment was converted to the frequency domain via a Fourier transform technique. Results show the complex modulus as a function of frequency and temperature. Necessary theoretical work was …
-
Correlating Q-Factor Measurements to Other Parameters in Deteriorated Concrete
The impact-echo technique is a nondestructive test used to detect flaws in concrete. Although deterioration can be quantified through the Q-factor, little is known about its relationship to other parameters. This research study explored possible correlations between Q-factors and other parameters …
-
A Study of Rubberfatigue Life and Cure Parameters
… These samples then underwent a series of nondestructive tests, to quantify, for example, dynamic stiffness, and then a destructive test, to quantify fatigue life. Multiple analytical approaches were then used to determine the process parameters that produced the rubber components with the …
-
Prediction of the Compressive Strength and Dynamic Modulus of Fiber Reinforced Concrete by Ultrasonic Pulse Velocity Measurement at Early Ages
… volume fraction, water to cement ratio, and test age. To test this hypothesis, an experimental program comprising of one hundred eighty-nine 100 mm x 200 mm fiber reinforced concrete cylinders with varying fiber types, fiber volume fractions, and water-to-cement ratios will be tested using …
-
Comparison of nondestructive testing technologies used for inspection of welded joints
… is to report on the comparison between different nondestructive test (NDT) methods applied for the detection of defects in welds. NDT methods such as Ultrasonic Testing (UT), Magnetic Particle Testing (MT) and Radiographic Testing (RT) may be applied for the detection of surface and subsurface …
-
Evaluation of concrete structures affected by alkali-silica reaction and delayed ettringite formation
… of structural safety and serviceability and nondestructive testing (NDT) is a minor component of the evaluation process. The research described in this dissertation involved a wide range of tests on plain and reinforced concrete at multiple scales. This included small cylinders and prisms, …
-
Structural Evaluation of SCDOT Prestressed Channel Bridges
… Bridge and similar bridges through live load tests, laboratory channel tests, and analysis. A channel girder similar to those in the Five Forks Bridge was tested in a four point bending arrangement to experimentally determine the cracking moment and nominal strength of the girders that make up …
-
A study to ascertain the viability of ultrasonic nondestructive testing to determine the mechanical characteristics of wood/agricultural hardboards with soybean based adhesives
… have been numerous studies with ultrasonic nondestructive testing and wood fiber composites. The problem of the study was to ascertain whether ultrasonic nondestructive testing can be used in place of destructive testing to obtain the modulus of elasticity (MOE) of the wood/agricultural …
-
Physics-Based Imaging Methods for Terahertz Nondestructive Evaluation Applications
… suited for many NDE applications. In a typical nondestructive test, the objective is to detect a feature of interest within the object and provide an accurate estimate of some geometrical property of the feature. Notable examples include the thickness of a pharmaceutical tablet coating layer or …
-
Nondestructive field assessment of flexible pavement and foundation layers
… (FWD) and ground penetrating radar (GPR) are nondestructive test devices widely used by transportation agencies to assess pavement conditions. The two papers in this thesis evaluated the uncertainties associated with interpreting data from these devices and assessed potential applications.</p> …
-
Fibre orientation and distribution in steel fibre reinforced concrete
… is established as a benchmark nondestructive test (NDT) for measuring fibre dispersion, including in industrial applications. In this study, a new image analysis method is developed using a combination of local gradient and morphological operations for the time-efficient …
-
Nondestructive inspection of load induced damage in fiber reinforced polyphenylene sulfide
… of the mechanical properties and nondestructive inspection of the material. The objectives of the nondestructive inspection program were twofold: i) to determine nondestructive testing techniques were most responsive to developing damage and ii) to identify the damage modes using …
-
Acoustic Resonance Response of Cast Iron
… meet the property re-quirements. Destructive and nondestructive tests are routinely performed to maintain the integrity of the produced cast iron. Numerical and multiple linear regression models have also been developed to obtain mechanical properties from process variables such as chem-ical …
Page 1 of 2