Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 275 for “"Normal Force"”.
-
Near-field Acoustic Microscope With Normal Force Metrology Capability
… introduces quartz tuning fork (QTF) based Shear-force Near-field Acoustic Microscopy (SANM) and Whispering Gallery Acoustic Microscopy (WGAS) systems, upgraded this time with Atomic Force Microscopy (AFM) capability to also monitor the vertical force component involved in shear force …
-
The unsteady normal force on an airfoil in oscillating flow
the effects of oscillating flow on the pressure force normal to the chord of a symmetrical airfoil were investigated experimentally employing a remote pressure transducer to measure the instantaneous pressure distribution. An open circuit wind tunnel having a set of the test section was used to …
-
Chemical structure origins of the normal force response in polymeric glasses
Simultaneous normal force and torque measurements were made as a function of deformation and temperature in a series of polymeric glasses with different chemical structures. A large normal force with a fast relaxation rate was found in two n-alkyl methacrylates, PMMA and PEMA. Examination of the …
-
A modular fingertip design for normal force feedback control of a 3-fingered dextrous robotic hand
… hand mechanics over the past decade, fingertip force remains predominantly controlled by flexor cable tension and joint position. A modular fingertip normal force sensor is developed here from basic semiconducting elastomer devices. Construction techniques are defined to shape standard Interlink …
-
Assessment of Normal force testing to measure adhesion at organic-inorganic interfaces in organic optoelectronic devices
… however, is a challenging task. In this study, Normal Force Adhesion testing was assessed to determine its suitability for organic devices. In this approach, force is applied perpendicular to the substrate, over the entire surface area of one device (9 mm2) until delamination occurs. In addition …
-
Optimizing Snake Locomotion on a Plane: A Variational and Analytical Framework for Friction and Normal Force Modulation
… periodic deformations and utilizing resistive force theory (RFT), we derive variational optimization conditions for minimizing the mechanical cost of transport (mCoT) and maximizing forward displacement. The results show that sawtooth-shaped body waveforms—characterized by alternating constant …
-
Shear behavior of plane joints under CNL and DNL conditions: Lab testing and numerical simulation
… to understand the influencing factors of the normal stress level, direct shear rate, horizontal cyclic shear frequency, normal impact frequency, horizontal cyclic shear displacement amplitude and vertical impact force amplitude. Lab test and numerical simulation results show that the …
-
Soft Tactile Sensor Embedded Artificial Skin
… resolution. Current approaches to measure shear force suffer from poor resolution and ambiguity. A highly sensitive sensor skin that accurately resolves contact force in three-dimension and senses vibration is needed for artificial manipulator to better interact with the environment and external …
-
Robotic active tactile sensing skills.
… of positional uncertainties and varying applied forces. In the plane tracking skill, the normal force of the contact as well as a rotational moment about an axis of the sensor was tracked. In the sphere tracking skill, the normal force and positional variations lateral to the sensor were tracked. …
-
Flow and interfacial dynamics in vascular vessels and microfluidics
This dissertation investigates the hemodynamic forces on biological cells adherent on vascular vessels as well as the interfacial dynamics of droplet motion in microfluidic channels. In addition, we develop a novel three-dimensional spectral boundary element algorithm for interfacial dynamics in …
-
Characterizing the Frictional Interface in Friction Stir Welding
… plate. The ranges of temperature, velocity, and normal force used in this method are 100–600°C, 0.38–2.0 m/s (75–400) surface feet per minute (SFM)), and 450–2700 N (100–600 lbf), respectively. Data are gathered at different parameter level combinations to provide enough data to create an …
-
Analysis of a shell of elliptical cross-section under internal pressure and body force
… is obtained. These equations are then solved for normal force, shear force, and bending moment. The solutions are compared with existing theoretical and FEA results, and the comparison shows good agreement. Additionally, the system of equations for cylindrical shells of elliptical cross-section …
-
Material Removal Rate Control for a Teleoperated Robotic Sander
… automated sanding is performed with a constant normal force, however this can lead to uneven sanding. To address this issue, a model of the sanding material removal rate is derived and experimental parameters are estimated. Furthermore, this model can be used to determine the normal force …
Page 1 of 14