Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 493 for “"Normal Stress"”.

  1. Interfacial dynamics in processing of materials with normal stress differences

    … of different materials. The destabilizing second normal stress differences exhibited by the soft particle paste are found to compete with the stabilizing force of surface tension. Stable and unstable wavenumber ranges are determined for this problem, as well as the fastest growing mode. This is …

    texas Repository record for Interfacial dynamics in processing of materials with normal stress differences (opens in a new tab)

  2. ATF5 is Required for the Normal Stress Response During Skeletal Muscle Denervation

    … To help prevent this outcome, various stress-responsive proteins within muscle cells help repair and minimize mitochondrial damage. Specifically, the stress-responsive protein ATF5 is known to help alleviate mitochondrial damage. To help understand more about these proteins in skeletal …

    york Repository record for ATF5 is Required for the Normal Stress Response During Skeletal Muscle Denervation (opens in a new tab)

  3. Drained residual shear and interface strength of soils at low effective normal stress

    … have been performed at relatively high effective normal stress levels, over 50 kPa. These effective normal stresses are relevant for many field applications and manageable in typical laboratory shear testing. However, there are field applications, such as offshore pipelines where the effective …

    texas Repository record for Drained residual shear and interface strength of soils at low effective normal stress (opens in a new tab)

  4. Shear Rupture of Massive Brittle Rock under Constant Normal Stress and Stiffness Boundary Conditions

    … non-jointed) brittle rock in underground high stress mines occurs under a variety of different boundary conditions ranging from constant stress (no resistance to deformation) to constant stiffness (resistance to deformation). While a variety of boundary conditions exist, the shear rupture of …

    toronto-retro Repository record for Shear Rupture of Massive Brittle Rock under Constant Normal Stress and Stiffness Boundary Conditions (opens in a new tab)

  5. A study of the bulk modulus and shear modulus of a Lake Agassiz clay

    … approach used in the study was to separate the stress system into volumetric and deviatoric components of stress. The bulk modulus is related to the volumetric behavior of the soil. The shear modulus is related to the deviatoric stress and to the level of mean normal stress. Thus the bulk …

    manitoba Repository record for A study of the bulk modulus and shear modulus of a Lake Agassiz clay (opens in a new tab)

  6. Experimental and Numerical Investigations of Fluid Flow for Natural Single Rock Fractures

    … decreasing mean aperture with increasing normal stress, (b) power-functionally decreasing 3D box fractal dimension with increasing normal stress, (c) linearly increasing mean aperture with increasing 3D box fractal dimension, (d) linearly decreasing mean aperture with increasing fracture …

    arizona-thes Repository record for Experimental and Numerical Investigations of Fluid Flow for Natural Single Rock Fractures (opens in a new tab)

  7. Three-dimensional monotonic and cyclic behaviour of sand-steel interfaces: Testing and modelling.

    … thesis is to investigate the effects of various stress and displacement paths on the behaviour of sand-steel interface. The study includes three parts: (i) the development of a new automated interface testing apparatus, (ii) a comprehensive experimental program, and (iii) elasto-plastic modelling …

    ottawa-retro Repository record for Three-dimensional monotonic and cyclic behaviour of sand-steel interfaces: Testing and modelling. (opens in a new tab)

  8. Squeeze Flow of Highly Concentrated Suspensions

    … through experiment and model, the anomalous normal stress distribution during constant-force squeeze flow of highly concentrated suspensions. Using pressure-sensitive films the normal stress distribution is measured in suspensions of glass spheres in a Newtonian liquid undergoing …

    south-carolina Repository record for Squeeze Flow of Highly Concentrated Suspensions (opens in a new tab)

  9. Response of Open Volcanic Systems to Static Stress Changes

    … even trigger eruptions at nearby volcanoes. The stress changes imparted by large earthquakes can cause otherwise stable conditions within the magmatic system to be disturbed, potentially inducing volcanic activity. The extent of the triggering potential is still unknown due to insufficient …

    mtu Repository record for Response of Open Volcanic Systems to Static Stress Changes (opens in a new tab)

  10. An analytical and experimental study of crack extension in center- notched composites

    The normal stress ratio theory for crack extension in anisotropic materials is studied analytically and experimentally in order to evaluate its validity. The theory is applied within a macroscopic-level analysis of a single center notch of arbitrary orientation in a unidirectional composite …

    vt Repository record for An analytical and experimental study of crack extension in center- notched composites (opens in a new tab)

  11. Modeling the dynamics of polymer solutions by dissipative particle dynamics

    … shear thinning in intrinsic viscosity and 1st normal stress for all solvent qualities, and a positive 2nd normal stress for the good solvent solution. The polymer chain in a good solvent solution exhibits more pronounced shear thinning in intrinsic viscosity and 1 st normal stress, and exhibits …

    wayne-thes Repository record for Modeling the dynamics of polymer solutions by dissipative particle dynamics (opens in a new tab)

  12. Shear behaviour of rock discontinuities and soil-rock interfaces

    … relative direction of shearing and under various normal stresses, over the full range of dilatant behaviour. The effect of scale on peak shear strength is studied by testing models of natural rock surfaces in full and divided into sub-samples of various sizes. Identical samples are reproduced by …

    whiterose Download PDF for Shear behaviour of rock discontinuities and soil-rock interfaces (opens in a new tab)

  13. The forces on pulp fibres during refining

    … but Page has suggested that characterizing the stress-strain history of fibres would lead to a better understanding of the refining process [Fundamentals of Papermaking, 9th Fundamental Res. Symp., Vol 1, p. 1-38, 1989]. Recent work by Martinez et al. [J. Pulp Paper Sci., 23(1):Jll-18, 1997] and …

    ubc Repository record for The forces on pulp fibres during refining (opens in a new tab) Download PDF for The forces on pulp fibres during refining (opens in a new tab)

  14. Cyclic Triaxial Testing to Evaluate Factors Affecting The Unsaturated Cyclic Behavior of a Silty Sand

    … techniques, initial matric suction, initial net normal stress, and cyclic stress ratio. Specimens prepared using the wetting path experienced significantly higher cyclic resistance than those prepared using the drying path. Specimens that were exposed to higher initial matric suction values …

    south-carolina Repository record for Cyclic Triaxial Testing to Evaluate Factors Affecting The Unsaturated Cyclic Behavior of a Silty Sand (opens in a new tab)

  15. Improved Fiber Orientation Predictions for Injection Molded Composites

    … experiment measuring the shear viscosity and the normal stress difference is one approach to determine the phenomenological parameters. The formulations were worked out for the shear stress and the normal stress difference with respect to the fiber orientation in a parallel-disk rotational …

    uiuc Repository record for Improved Fiber Orientation Predictions for Injection Molded Composites (opens in a new tab)

  16. Failure Mechanisms and Strength of Non-Persistent Rock Joints

    … minus shear strength of joint), for the average normalized stress at failure. Conditions causing BMSR to be different from the reference value include: (a) for mode 1, shear failure in the plane of the joints through bridge and non-persistent joints, BMSR decreases, as the ratio of normal stress, …

    uiuc Repository record for Failure Mechanisms and Strength of Non-Persistent Rock Joints (opens in a new tab)

  17. A nonlinear viscoelastic model

    … the non-Newtonian viscosities and the primary normal stress differences of high polymers at steady-state shearing flow. It has been demonstrated that the Huang-Shangkuan model gives the best representation of the experimental data for a wide range of shear rates. In the high shear rate region …

    njit Repository record for A nonlinear viscoelastic model (opens in a new tab)

  18. Conditionally Analyzed Mean Velocity and Turbulence Measurements in a Plume-Induced Boundary Layer Separated Flowfield

    … increase the streamwise and transverse Reynolds normal stresses (which both peak near reattachment), the primary shear stress, and the normal stress anisotropy. The shock-separated shear layer consists of only a single layer with a large initial growth rate followed by a much smaller growth rate, …

    uiuc Repository record for Conditionally Analyzed Mean Velocity and Turbulence Measurements in a Plume-Induced Boundary Layer Separated Flowfield (opens in a new tab)

Page 1 of 25