Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 87 for “"Normal forces"”.

  1. A new paradigm for generating surface-normal forces for hull-cleaning robots

    … The relationship is valid over a range of forces acting on the system, geometric, and material properties. Major and minor geometry alterations provide insight to customizing pressure or wall shear stress profiles.The biofouling removal ability of a shear-based device was field tested on …

    msu Repository record for A new paradigm for generating surface-normal forces for hull-cleaning robots (opens in a new tab)

  2. In-vitro investigation of frictional behavior and influence of normal forces on orthodontic materials in wet and dry states

    … study investigates static and kinetic frictional forces between brackets and orthodontic archwires. To cover a wide field of parameters, which influence sliding, different environmental states and characteristics of orthodontic materials are taken into account. The study is divided into two parts: …

    lmu-germany Repository record for In-vitro investigation of frictional behavior and influence of normal forces on orthodontic materials in wet and dry states (opens in a new tab)

  3. Estimering av normalkrafter på däck i en Formula Student-bil - Estimation of Tyre Normal Forces in a Formula Student Car

    En korrekt estimering av vertikala normalkrafter på ett fordons hjul är avgörande för optimal vridmomentfördelning och maximalt väggrepp i en fyrhjulsdriven Formula Student-bil. Den nuvarande modellen som används inom Chalmers Formula Student (CFS) har inte tidigare validerats mot referensdata …

    chalmers Repository record for Estimering av normalkrafter på däck i en Formula Student-bil - Estimation of Tyre Normal Forces in a Formula Student Car (opens in a new tab)

  4. Combination of Lateral and Normal Forces for Investigation of Mechanical Properties and Tribological Behaviour of Bulk and Coated Materials on the Micro-Scale

    … are kept up to now. The combined application of normal and lateral forces allows to extend the possibilities of conventional contact mechanical approaches for investigations of mechanical and tribological behaviour of bulk and coated materials. Due to the unique construction of the Lateral Force …

    qucosa-diss

  5. Analysis of In-Situ Shear and Normal Forces During Metal Cmp, Electrical Interface States of Sulfur-Passivated Sige Moscaps, and Reaction Kinetics of Pyrite Nanocrystal Purity

    … spectral signatures and variances of in-situ forces during chemical mechanical planarization (CMP) of metal thin films for the purposes of improving endpoint detection, in particular, and helping us gain a better fundamental understanding of CMP processes, in general. A new parameter, …

    arizona-thes Repository record for Analysis of In-Situ Shear and Normal Forces During Metal Cmp, Electrical Interface States of Sulfur-Passivated Sige Moscaps, and Reaction Kinetics of Pyrite Nanocrystal Purity (opens in a new tab)

  6. Investigations into Flange Surface Friction Effects on Shear Stud Load Transfer in Composite Bridge Girders

    … used to measure stud demands while controlled normal forces are applied to each slab to allow controlled changes in flange friction force during testing. A total of nine experimental tests are conducted. The analytical study involves 32 finite element simulations of pushout geometries having …

    arkansas Repository record for Investigations into Flange Surface Friction Effects on Shear Stud Load Transfer in Composite Bridge Girders (opens in a new tab)

  7. Surface textures and non-Newtonian fluids for decreased friction in full film lubrication

    … a custom tribo-rheometer in order to measure the normal force production and apparent viscosity reduction due to the surface textures. This work shows that symmetry must be broken in order to produce normal forces with surface textures which are caused by viscous effects for gap based Reynolds …

    uiuc Repository record for Surface textures and non-Newtonian fluids for decreased friction in full film lubrication (opens in a new tab)

  8. A study of sand-asphalt mixtures: a constitutive model based on a thermomechanical framework and experimental corroboration

    … absence of systematic documentation of normal forces generated as a result of shear. The normal force generated during simple shear is a clear indication of the nonlinear nature of the material. The effect of fillers (hydrated lime and limestone), air voids, aggregate gradation, asphalt …

    tamu Repository record for A study of sand-asphalt mixtures: a constitutive model based on a thermomechanical framework and experimental corroboration (opens in a new tab)

  9. Force and moment analysis of stacked counter rotating eccentric mass tree shaker energy-wheel system

    … are commonly known to create planer pulse forces. The pulse is created by the rotation of eccentric mass about a fixed common shaft. The frequency and magnitude of the force is determined by the weight, angular velocity, and center of gravity location of each energy wheel. The industry has …

    iastate Repository record for Force and moment analysis of stacked counter rotating eccentric mass tree shaker energy-wheel system (opens in a new tab)

  10. MULTI-DIGIT HUMAN PREHENSION

    … and mechanical advantage hypothesis. (1) Forces and moments produced by fingers during circular object prehension were grouped into two independent subsets: one subset related to grasping stability control and the other associated with rotational equilibrium control. This result supports …

    maryland Repository record for MULTI-DIGIT HUMAN PREHENSION (opens in a new tab)

  11. Plastic interaction relations for hollow structural steel sections.

    … sections under load combinations of shearing forces, bending moments, and twisting moments. The experimental results agree very well with the predicted failure loads based on recently developed interaction relations. The experimental program establishes the validity of the analytical …

    ottawa-retro Repository record for Plastic interaction relations for hollow structural steel sections. (opens in a new tab)

  12. Uma estratégia adaptativa para problemas de contato em elasticidade

    … frictionless problem with given tangential forces along the contact area and P2 is the associated Duvaut-Lions problem of given normal forces and Coulomb-type friction boundary conditions along the contact region. When the convergence is achieved error estimates are computed and new values …

    brazil-uerj Repository record for Uma estratégia adaptativa para problemas de contato em elasticidade (opens in a new tab)

  13. Experimental and numerical investigation of the tribological properties of water-hydraulic seals

    … material with different sliding velocities and normal forces. In addition, the contact process of rubber seals is simulated and equations for seal wear for the specific experimental conditions are formulated.

    qucosa-diss

  14. Model junction analysis of the friction and wear of metallic surfaces

    … the theoretical estimate of the friction and normal forces made by A. P. Green. The wear results indicate general correlations between the model and actual surfaces with regard to particle shape and wear-load relationships. In general, the results of the investigation indicate that actual …

    ubc Repository record for Model junction analysis of the friction and wear of metallic surfaces (opens in a new tab) Download PDF for Model junction analysis of the friction and wear of metallic surfaces (opens in a new tab)

  15. Development of a Closed-Loop Force Reduction Mechanism in a Gait Rehabilitation Device

    … Typical elliptical machines do not mimic normal gait and therefore require modifications for clinical rehabilitation. This research builds on previous modifications of an elliptical trainer designed to simulate level-surface walking. This design differed from a commercial version. It …

    vcu Repository record for Development of a Closed-Loop Force Reduction Mechanism in a Gait Rehabilitation Device (opens in a new tab)

  16. Shear-induced microstructure in hollow fiber membrane dopes

    … Boger fluid showed that strong normal forces alone are not sufficient to form the vorticity structures, but that shear thinning is also required. Lastly, a study was conducted examining cross-stream migration of particles dispersed in viscoelastic media. Fluids exhibiting varying …

    gatech Repository record for Shear-induced microstructure in hollow fiber membrane dopes (opens in a new tab)

  17. Novel Nanoindentation-Based Techniques for MEMS and Microfluidics Applications

    … apparatus has been investigated. Friction forces become important at the device level, and the conical tip always makes a crack at the edge of the sliders, thus the slider design needs to be optimized to account for the probe geometry. In chapter 4, the measurement of electrowetting has …

    usf Repository record for Novel Nanoindentation-Based Techniques for MEMS and Microfluidics Applications (opens in a new tab)

Page 1 of 5