Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Nozzle Clogging"”.

  1. Nozzle clogging during the continuous casting of aluminum-killed steel

    … of the mechanisms and factors affecting nozzle clogging so that practices can be implemented in industry to reduce the impact of this problem."--Abstract, page iv.

    must-thes Repository record for Nozzle clogging during the continuous casting of aluminum-killed steel (opens in a new tab)

  2. MODEL-BASED MONITORING OF NOZZLE CLOGGING IN FUSED DEPOSITION MODELLING PROCESS

    … errors that was not fully addressed yet is nozzle clogging in FDM 3D printing. Nozzle clogging is one of the significant process errors in FDM 3D printers, and it affects the quality of the prototyped parts. In addition, present FDM 3D printers have limited process monitoring techniques to …

    nus Repository record for MODEL-BASED MONITORING OF NOZZLE CLOGGING IN FUSED DEPOSITION MODELLING PROCESS (opens in a new tab) Download file for MODEL-BASED MONITORING OF NOZZLE CLOGGING IN FUSED DEPOSITION MODELLING PROCESS (opens in a new tab)

  3. Innovative refractories for preventing nozzle clogging in continuously cast aluminum-killed steels

    "Nozzle clogging in submerged entry and tundish nozzles adversely impacts the productivity and quality of continuously cast aluminum-killed steels. The objective of the research conducted was to develop innovative refractories that are less prone to accretion formation than current materials. …

    must-thes Repository record for Innovative refractories for preventing nozzle clogging in continuously cast aluminum-killed steels (opens in a new tab)

  4. Argon Bubble Behavior in Slide-Gate Tundish Nozzles During Continuous Casting of Steel Slabs

    "Argon injection into a tundish nozzle is an efficient and widely employed method to reduce nozzle clogging in the continuous casting process. It also affects casting operation and product quality by changing the flow pattern in the nozzle and mold. The current work combines mathematical modeling …

    uiuc Repository record for Argon Bubble Behavior in Slide-Gate Tundish Nozzles During Continuous Casting of Steel Slabs (opens in a new tab)

  5. Influence of Alumina Addition to Aluminum Fins for Compact Heat Exchangers Produced by Cold Spray Additive Manufacturing

    … be seen as a cost-effective measure, preventing nozzle clogging. The fin geometries that were produced were observed using a 3D digital microscope to determine the flow passages width and fins geometric details. Heat transfer and pressure tests were carried out using different ranges of …

    ottawa-retro Repository record for Influence of Alumina Addition to Aluminum Fins for Compact Heat Exchangers Produced by Cold Spray Additive Manufacturing (opens in a new tab)

  6. Development of High-Strength Composites with Sustainable Fibers for Structural Applications

    … up to 30% fiber loading were achieved without nozzle clogging, though higher fiber loading negatively impacted mechanical properties. This study also investigates the potential of CNT incorporation in asphaltene-derived carbon fibers and the impact of carbon fiber reinforcement to enhance the …

    calgary Repository record for Development of High-Strength Composites with Sustainable Fibers for Structural Applications (opens in a new tab)

  7. Effect of Dispersion on Rheology and 3D Printing of Chitosan-Graphene-Titanium Dioxide Composites

    … systems faces challenges, particularly nozzle clogging. This paper explores the relationship between dispersion of aggregate size, torsional rheology, and the capacity to print relatively highly particle-filled systems. Various characterization methods, including torsional rheology, …

    vt Repository record for Effect of Dispersion on Rheology and 3D Printing of Chitosan-Graphene-Titanium Dioxide Composites (opens in a new tab)

  8. Hybrid Models for BOF Steelmaking and Continuous Casting Applications

    … learning model was established to monitor the nozzle clogging phenomenon in continuous casting based on production data of four steel grades collected from Stelco, Lake Erie Works. Firstly, a clogging index was formulated based on process parameters to indicate the severity of clogging buildup …

    toronto-retro Repository record for Hybrid Models for BOF Steelmaking and Continuous Casting Applications (opens in a new tab)

  9. ENHANCEMENT OF SPRAY COOLING HEAT TRANSFER USING EXTENDED SURFACES AND NANOFLUIDS

    … heat transfer technique in which an atomizing nozzle provides a flow of liquid droplets directed towards a hot surface. This dissertation explores two potentially powerful techniques capable of improving traditional spray cooling: nanofluids and extended surfaces. Nanofluids were experimentally …

    maryland Repository record for ENHANCEMENT OF SPRAY COOLING HEAT TRANSFER USING EXTENDED SURFACES AND NANOFLUIDS (opens in a new tab)

  10. Modeling of multiphase flow, superheat dissipation, particle transport, and capture in continuous casting of steel

    … process. During this process, fluid flow in the nozzle and strand can capture detrimental particles such as: inclusions from upstream ladle refining and tundish, entrainment of mold slag, and argon bubbles which are often injected into the nozzle in order to lessen nozzle clogging. In this study, …

    colo-mines Repository record for Modeling of multiphase flow, superheat dissipation, particle transport, and capture in continuous casting of steel (opens in a new tab)

  11. Colloidal and Polyelectrolyte Inks for Direct -Write Assembly of 3D Periodic Structures

    … involves ink deposition through a fine scale nozzle that is robotically controlled using a 3-axis stage. Central to this approach is the design of inks that are capable of flowing through deposition nozzles of varying size and then ""setting"" immediately to facilitate shape retention of the …

    uiuc Repository record for Colloidal and Polyelectrolyte Inks for Direct -Write Assembly of 3D Periodic Structures (opens in a new tab)

  12. Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying

    … deposition rate, but high viscosity and nozzle clogging are issues. To address these issues, this study explores flash boiling atomization (FBA) as a novel injection method in SPS for high solids concentrations, up to 70 wt.%. FBA uses thermodynamic instability to break up a liquid jet. …

    concordia Download PDF for Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying (opens in a new tab)

  13. Three Dimensional Digital Alloying with Reactive Metal Inks

    … the nanoparticle inks such as ink stability and nozzle clogging can be avoided. Copper and nickel precursor inks were formulated having rheological properties suitable for inkjet printing. Reduction of metal inks was studied under various conditions. The sintered metal and alloy structures were …

    rit Repository record for Three Dimensional Digital Alloying with Reactive Metal Inks (opens in a new tab)

  14. 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization

    … additive to prevent phase separation and nozzle clogging. A literature review on additive manufacturing with agricultural biowastes was conducted, followed by experimental investigations into how preparation parameters--such as waiting time between mixing and printing--affect rheological …

    tamu Repository record for 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization (opens in a new tab) Embargoed until 2027-08-01

  15. 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization

    … additive to prevent phase separation and nozzle clogging. A literature review on additive manufacturing with agricultural biowastes was conducted, followed by experimental investigations into how preparation parameters--such as waiting time between mixing and printing--affect rheological …

    tamu Repository record for 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization (opens in a new tab) Embargoed until 2027-08-01

  16. 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization

    … additive to prevent phase separation and nozzle clogging. A literature review on additive manufacturing with agricultural biowastes was conducted, followed by experimental investigations into how preparation parameters--such as waiting time between mixing and printing--affect rheological …

    tamu Repository record for 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization (opens in a new tab) Embargoed until 2027-08-01

  17. 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization

    … additive to prevent phase separation and nozzle clogging. A literature review on additive manufacturing with agricultural biowastes was conducted, followed by experimental investigations into how preparation parameters--such as waiting time between mixing and printing--affect rheological …

    tamu Repository record for 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization (opens in a new tab) Embargoed until 2027-08-01

  18. 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization

    … additive to prevent phase separation and nozzle clogging. A literature review on additive manufacturing with agricultural biowastes was conducted, followed by experimental investigations into how preparation parameters--such as waiting time between mixing and printing--affect rheological …

    tamu Repository record for 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization (opens in a new tab) Embargoed until 2027-08-01

  19. 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization

    … additive to prevent phase separation and nozzle clogging. A literature review on additive manufacturing with agricultural biowastes was conducted, followed by experimental investigations into how preparation parameters--such as waiting time between mixing and printing--affect rheological …

    tamu Repository record for 3D Printing of Biomass-Fungi Composite Materials: Experimentation and Characterization (opens in a new tab) Embargoed until 2027-08-01

  20. Effects of different degrees of inclusion adhesion on clog formation and growth in a submerged entry nozzle

    In the continuous casting of steels, clogging of the submerged entry nozzle has long been a persistent and costly issue. Previous modelling attempts have assumed that inclusions of different types exhibit the same degree of adhesion when colliding with the nozzle wall - an assumption not borne out …

    mcmaster Repository record for Effects of different degrees of inclusion adhesion on clog formation and growth in a submerged entry nozzle (opens in a new tab)

Page 1 of 2