Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 826 for “"Nozzles"”.

  1. Retroreflective shadowgraph of clustered rocket nozzles

    … area-ratio thrust optimized parabolic contour nozzles is visualized over a range of nozzle pressure ratios by way of retroreflective shadowgraphy. Both nozzles exhibit free shock separated flow, restricted shock separated flow and an end-effects-regime prior to flowing full. Experimental tests …

    texas Repository record for Retroreflective shadowgraph of clustered rocket nozzles (opens in a new tab)

  2. Low Pressure Plasmas in Magnetic Nozzles

    … low pressure plasmas interacting with magnetic nozzles in two different plasma reactors. In the Chi Kung reactor, a radiofrequency (RF) plasma is created in the throat of the magnetic nozzle and is allowed to expand through the diverging field. Under the experimental conditions used in this …

    anu Repository record for Low Pressure Plasmas in Magnetic Nozzles (opens in a new tab)

  3. Spray Characteristics From Fire Hose Nozzles

    … of fire hose streams. Smooth bore fire hose nozzles create jets with shear column breakup due to high Weber numbers. Laboratory settings produced a cylindrical water jet with the same column breakup behavior. The jet was injected into still air with fully developed turbulent flow. The test …

    maryland Repository record for Spray Characteristics From Fire Hose Nozzles (opens in a new tab)

  4. Design of nozzles for partly ionized gases

    An analytic expression is obtained for the speed of sound in a partly ionized gas under certain conditions. The method of characteristics is adapted to use this information for the solution of the compressible gas flow potential equation, and the contour of a nozzle which accelerates the gas to a …

    rice Repository record for Design of nozzles for partly ionized gases (opens in a new tab)

  5. Characterization of ground nozzles for pesticide applications

    … and drift potential of commonly used application nozzles for ground systems in the US, and 3) bridge laboratory and field studies in pesticide application technology using established and new methodologies. The data from this research aided in the development of a robust application technology …

    nebraska Repository record for Characterization of ground nozzles for pesticide applications (opens in a new tab)

  6. Effervescent Atomization through Circular and Elliptical Nozzles

    Effervescent atomization in quiescent air and in a subsonic crossflow are experimentally studied. The spray angle of an effervescent atomizer with an elliptical orifice is measured by employing the shadowgraph technique. Spray images were captured from both the minor and major axis views. The …

    concordia Download PDF for Effervescent Atomization through Circular and Elliptical Nozzles (opens in a new tab)

  7. Inclusion behaviour in steel flows through convergent nozzles.

    … velocity have been studied. Two experimental nozzles have been tested which have demonstrated the importance of limiting the centripetal force.</p> <p>It has been shown that there is a good relationship between hydrogen bubble behaviour and model predictions. This has been particularly true of …

    sheffield-hallam Download file for Inclusion behaviour in steel flows through convergent nozzles. (opens in a new tab)

  8. A Computational Analysis of Novel Non-circular Nozzles

    … the flow properties of novel non-circular nozzles. In last few decades, non-circular nozzles have been investigated intensively due to their remarkably superior capabilities in enhancing mass entrainment over circular nozzles. In this thesis, to increase the amount of ambient fluid …

    rice Repository record for A Computational Analysis of Novel Non-circular Nozzles (opens in a new tab)

  9. Experimental Characterization of Plasma Detachment from Magnetic Nozzles

    Magnetic nozzles, like Laval nozzles, are observed in several natural systems and have application in areas such as electric propulsion and plasma processing. Plasma flowing through these nozzles is inherently tied to the field lines and must separate for momentum redirection or particle transport …

    rice Repository record for Experimental Characterization of Plasma Detachment from Magnetic Nozzles (opens in a new tab)

  10. Dynamic fluidic nozzles for pulse detonation engine applications

    An efficient nozzle design is critical for enhancing the benefits of Pulse Detonation Engines (PDEs) and enabling their use as future propulsion or power generation systems. Due to the inherent variation in chamber pressure for Pulse Detonation Combustors, it has been difficult to design a nozzle, …

    nps Repository record for Dynamic fluidic nozzles for pulse detonation engine applications (opens in a new tab)

  11. Fluidically augmented nozzles for pulse detonation engine applications

    Pulse Detonation Engines (PDE) operate in a cyclic manner resulting in large changes in the combustion chamber pressure. The widely varying pressure ratio between the chamber and nozzle exit makes it difficult to efficiently produce thrust since a fixed area ratio exhaust nozzle would operate off …

    nps Repository record for Fluidically augmented nozzles for pulse detonation engine applications (opens in a new tab)

  12. Flow field characteristics of dynamic radial jet reattachment nozzles

    … on surface pressure distribution of DRJR nozzles. A Scanivalve data acquisition system is used for acquisition of surface pressures. A titanium dioxide – kerosene mixture and photographing technique is used for the surface flow visualization. It is seen that Xp/b ratio has the major effect …

    ttu Repository record for Flow field characteristics of dynamic radial jet reattachment nozzles (opens in a new tab)

  13. Modelling of cavitation in nozzles for diesel injection applications

    … and then rupture to form cavities. In the real nozzles at microscopic levels there are always some non-uniformities or crevices that can aggravate cavitation and hence its importance should be assessed. The flow passage inside the injector is small enough to have high enough Reynolds number to …

    waterloo Repository record for Modelling of cavitation in nozzles for diesel injection applications (opens in a new tab)

  14. A theoretical study of the performance of resistojet nozzles

    The theoretical development of four computer models of resistojet nozzle performance is reported. Five main energy loss processes are accounted for; these are (i) frozen chemical rate processes, (ii) finite rate vibrational relaxation, (iii) incomplete expansion, (iv) viscous flow and (v) radial …

    soton Download PDF for A theoretical study of the performance of resistojet nozzles (opens in a new tab)

  15. Descaling petroleum production tubing using multiple high-pressure nozzles

    … low flow rate of 12 l/m from multiple flat fan nozzles of different arrangement and stand-off distance. Housed in a constructed simulated production tubing chamber with vacuum and compression capacities to remove hard scale deposits of SrSO4 and CaCO3. In addition to the constructed wax deposit …

    salford Download PDF for Descaling petroleum production tubing using multiple high-pressure nozzles (opens in a new tab)

Page 1 of 42